Sharp DX-C310 / DX-C311 / DX-C400 / DX-C401 (serv.man75) Service Manual / Technical Bulletin ▷ View online
CCE 748
Sharp Electronics (UK) Ltd., Technical Services Group
No. Subject
Description
Japanese/Frenc
h
Production
ROM Control
No.
American
Production
ROM Control
No.
20 Option
related
On the built-in keyboard model, if a keyboard
type card reader is connected to the read USB
port and low-power mode is entered and then
recovered from, the Keyboard type card reader
will not be recognized. This glitch has been
corrected.
type card reader is connected to the read USB
port and low-power mode is entered and then
recovered from, the Keyboard type card reader
will not be recognized. This glitch has been
corrected.
D01 D00
21 Other
When the network connection speed is slow,
the remote operation panel will become
abnormally slow. The following has been
performed to improve this functionality.
the remote operation panel will become
abnormally slow. The following has been
performed to improve this functionality.
1) The compression option for VNC protocol
has been enabled.
2) When the next data transmission request is
sent while a request is being processed, all
but the final is destroyed and the drawing
data is thinned.
but the final is destroyed and the drawing
data is thinned.
D01 D00
22 Other
Of counter information displayed in the MFP
main body, items that do not exist in MIB
information have been added to MIB
information.
main body, items that do not exist in MIB
information have been added to MIB
information.
D01 D00
23
Error code related
During preheating, by opening the right door
of the MFP unit or the cover of the finisher
(MX-FN12), an “L4-31” error would occur. This
glitch has been corrected.
of the MFP unit or the cover of the finisher
(MX-FN12), an “L4-31” error would occur. This
glitch has been corrected.
D01 D01
24
Error code related
While the MFP unit is in ready standby mode
and the lower heat roller is turned off, in some
rare cases an “H4-04” error would occur. This
glitch has been corrected.
and the lower heat roller is turned off, in some
rare cases an “H4-04” error would occur. This
glitch has been corrected.
D01 D01
CCE 748
Sharp Electronics (UK) Ltd., Technical Services Group
No. Subject
Description
Japanese/Frenc
h
Production
ROM Control
No.
American
Production
ROM Control
No.
20 Option
related
On the built-in keyboard model, if a keyboard
type card reader is connected to the read USB
port and low-power mode is entered and then
recovered from, the Keyboard type card reader
will not be recognized. This glitch has been
corrected.
type card reader is connected to the read USB
port and low-power mode is entered and then
recovered from, the Keyboard type card reader
will not be recognized. This glitch has been
corrected.
D01 D00
21 Other
When the network connection speed is slow,
the remote operation panel will become
abnormally slow. The following has been
performed to improve this functionality.
the remote operation panel will become
abnormally slow. The following has been
performed to improve this functionality.
1) The compression option for VNC protocol
has been enabled.
2) When the next data transmission request is
sent while a request is being processed, all
but the final is destroyed and the drawing
data is thinned.
but the final is destroyed and the drawing
data is thinned.
D01 D00
22 Other
Of counter information displayed in the MFP
main body, items that do not exist in MIB
information have been added to MIB
information.
main body, items that do not exist in MIB
information have been added to MIB
information.
D01 D00
23
Error code related
During preheating, by opening the right door
of the MFP unit or the cover of the finisher
(MX-FN12), an “L4-31” error would occur. This
glitch has been corrected.
of the MFP unit or the cover of the finisher
(MX-FN12), an “L4-31” error would occur. This
glitch has been corrected.
D01 D01
24
Error code related
While the MFP unit is in ready standby mode
and the lower heat roller is turned off, in some
rare cases an “H4-04” error would occur. This
glitch has been corrected.
and the lower heat roller is turned off, in some
rare cases an “H4-04” error would occur. This
glitch has been corrected.
D01 D01
CCE 748
Sharp Electronics (UK) Ltd., Technical Services Group
No. Subject
Description
Japanese/Frenc
h
Production
ROM Control
No.
American
Production
ROM Control
No.
20 Option
related
On the built-in keyboard model, if a keyboard
type card reader is connected to the read USB
port and low-power mode is entered and then
recovered from, the Keyboard type card reader
will not be recognized. This glitch has been
corrected.
type card reader is connected to the read USB
port and low-power mode is entered and then
recovered from, the Keyboard type card reader
will not be recognized. This glitch has been
corrected.
D01 D00
21 Other
When the network connection speed is slow,
the remote operation panel will become
abnormally slow. The following has been
performed to improve this functionality.
the remote operation panel will become
abnormally slow. The following has been
performed to improve this functionality.
1) The compression option for VNC protocol
has been enabled.
2) When the next data transmission request is
sent while a request is being processed, all
but the final is destroyed and the drawing
data is thinned.
but the final is destroyed and the drawing
data is thinned.
D01 D00
22 Other
Of counter information displayed in the MFP
main body, items that do not exist in MIB
information have been added to MIB
information.
main body, items that do not exist in MIB
information have been added to MIB
information.
D01 D00
23
Error code related
During preheating, by opening the right door
of the MFP unit or the cover of the finisher
(MX-FN12), an “L4-31” error would occur. This
glitch has been corrected.
of the MFP unit or the cover of the finisher
(MX-FN12), an “L4-31” error would occur. This
glitch has been corrected.
D01 D01
24
Error code related
While the MFP unit is in ready standby mode
and the lower heat roller is turned off, in some
rare cases an “H4-04” error would occur. This
glitch has been corrected.
and the lower heat roller is turned off, in some
rare cases an “H4-04” error would occur. This
glitch has been corrected.
D01 D01
CCE 748
Sharp Electronics (UK) Ltd., Technical Services Group
No. Subject
Description
Japanese/Frenc
h
Production
ROM Control
No.
American
Production
ROM Control
No.
20 Option
related
On the built-in keyboard model, if a keyboard
type card reader is connected to the read USB
port and low-power mode is entered and then
recovered from, the Keyboard type card reader
will not be recognized. This glitch has been
corrected.
type card reader is connected to the read USB
port and low-power mode is entered and then
recovered from, the Keyboard type card reader
will not be recognized. This glitch has been
corrected.
D01 D00
21 Other
When the network connection speed is slow,
the remote operation panel will become
abnormally slow. The following has been
performed to improve this functionality.
the remote operation panel will become
abnormally slow. The following has been
performed to improve this functionality.
1) The compression option for VNC protocol
has been enabled.
2) When the next data transmission request is
sent while a request is being processed, all
but the final is destroyed and the drawing
data is thinned.
but the final is destroyed and the drawing
data is thinned.
D01 D00
22 Other
Of counter information displayed in the MFP
main body, items that do not exist in MIB
information have been added to MIB
information.
main body, items that do not exist in MIB
information have been added to MIB
information.
D01 D00
23
Error code related
During preheating, by opening the right door
of the MFP unit or the cover of the finisher
(MX-FN12), an “L4-31” error would occur. This
glitch has been corrected.
of the MFP unit or the cover of the finisher
(MX-FN12), an “L4-31” error would occur. This
glitch has been corrected.
D01 D01
24
Error code related
While the MFP unit is in ready standby mode
and the lower heat roller is turned off, in some
rare cases an “H4-04” error would occur. This
glitch has been corrected.
and the lower heat roller is turned off, in some
rare cases an “H4-04” error would occur. This
glitch has been corrected.
D01 D01
Display