Sharp DX-C310 / DX-C311 / DX-C400 / DX-C401 (serv.man80) Service Manual / Technical Bulletin ▷ View online
CCE 700
Sharp Electronics (UK) Ltd., Technical Services Group
ROM UPGRADE ..... (4) TO (5).
1.Model Name: MX-C310/C311/C380/C381/C400/C401,
DX-C310/C311/C380/C381/C400/C401
2.Description:
Upgrade of PCU-ROM and E-Manual (5)
From mid-July 2009 production
Model name
ROM
control No.
ICU PCU SCU
IMAGE
DATA
E-
Manual
MX-C310/C380/C400
DX-C310/C380/C400
C11
0220F0
0107F0 0102F0 0100F0 0160F1
MX-C311/C381/C401
DX-C311/C381/C401
0220F1
* ICU above is the version described in the ROM management label. Check that the actual
version is following (Sim22-5).
- MX-C310/C380/C400, DX-C310/C380/C400
ICU(MAIN): 02.20.F0/ICU(BOOT): 01.02.F1/LANGUAGE: 01.08.F0/GRAPHIC: 01.01.F1/
COLOR_PROFILE: 01.00.F0
COLOR_PROFILE: 01.00.F0
- MX-C311/C381/C401, DX-C311/C381/C401
ICU(MAIN): 02.20.F1/ICU(BOOT): 01.02.F1/LANGUAGE: 01.08.F0/GRAPHIC: 01.01.F1/
COLOR_PROFILE: 01.00.F0
COLOR_PROFILE: 01.00.F0
Item of change: See the accompanying sheet.
TECHNICAL BULLETIN
Date:8
TH
SEPT 2009
Model: MX-C310 - DX-C401
Ref: CCE 700
Ref: CCE 700
Colour: White
Page: 1 0F 6
CCE 700
Sharp Electronics (UK) Ltd., Technical Services Group
Upgrade of ICU, PCU, SCU-ROM and E-Manual (4)
From July 2009 production
Model name
ROM
control No.
ICU PCU SCU
IMAGE
DATA
E-
Manual
MX-C310/C380/C400
DX-C310/C380/C400
C00
0220F0
0106F0 0102F0 0100F0 0150F1
MX-C311/C381/C401
DX-C311/C381/C401
0220F1
* ICU above is the version described in the ROM management label. Check that the actual
version is following (Sim22-5).
- MX-C310/C380/C400, DX-C310/C380/C400
ICU(MAIN): 02.20.F0/ICU(BOOT): 01.02.F1/LANGUAGE: 01.08.F0/GRAPHIC: 01.01.F1/
COLOR_PROFILE: 01.00.F0
COLOR_PROFILE: 01.00.F0
- MX-C311/C381/C401, DX-C311/C381/C401
ICU(MAIN): 02.20.F1/ICU(BOOT): 01.02.F1/LANGUAGE: 01.08.F0/GRAPHIC: 01.01.F1/
COLOR_PROFILE: 01.00.F0
COLOR_PROFILE: 01.00.F0
Item of change: See the accompanying sheet.
ROM Version Combination History Table
No. Model
name
ROM
administration
ICU PCU SCU
IMAGE
DATA
E-Manual
Action
Issued
T/R No.
(3)
MX-
C310/C380/C400
DX-C310/C380/C400
B22
0103F0
0104F0 0101F0 0100F0 0140F1
2009/3
Mid
CCE-659
MX-
C311/C381/C401
DX-C311/C381/C401
0103F1
(2)
MX-
C310/C380/C400
DX-C310/C380/C400
B12
0103F0
0104F0 0101F0 0100F0 0130F1
2009/1
Mid
MX-
C311/C381/C401
DX-C311/C381/C401
0103F1
(1)
MX-
C310/C380/C400
DX-C310/C380/C400
B11
0103F0
0103F0 0101F0 0100F0 0130F1
2008/11
Mid
CCE-637
MX-
C311/C381/C401
DX-C311/C381/C401
0103F1
CCE 700
Sharp Electronics (UK) Ltd., Technical Services Group
[Description]
No. Subject
Description
(5) -1
Main body control-
related
related
The toner motor may not be driven even if SIM10-1 (toner motor operation check) is
implemented (only when a developer tank is detected as a new product). This glitch
has been corrected.
implemented (only when a developer tank is detected as a new product). This glitch
has been corrected.
(5) -2
E-Manual-related
An incorrect value was found in the auto power shutoff setting modified in the E-
Manual version "0150F1" for MX-C380 for Europe. This value has been corrected.
(For details, see Pages "6-20" and "6-56" of E-Manual System Settings.)
Manual version "0150F1" for MX-C380 for Europe. This value has been corrected.
(For details, see Pages "6-20" and "6-56" of E-Manual System Settings.)
(4) -1
Support for new
standards of the
International
Energy Star
program
standards of the
International
Energy Star
program
The criteria change of the International Energy Star program involves the following
changes:
(1) In the destination setting (Sim26-6), the factory default values for the function of
changes:
(1) In the destination setting (Sim26-6), the factory default values for the function of
preheating and auto power shutoff have been changed.
Model name
Destination
Before After
Preheatin
g
Auto power
shutoff
Preheatin
g
Auto power
shutoff
MX-C310 Series
North America/
Europe/Australi
a
a
10min. 45min. 1min. 10min.
DX-C310 Series
North America/
Europe
10min. 45min. 1min. 10min.
MX-C380 Series
Europe/Australi
a
a
10min. 45min. 1min. 45min.
DX-C380 Series
Europe
10min. 45min. 1min. 45min.
MX-C400 Series
North
America
10min. 45min. 1min. 45min.
MX-C400 Series
North
America
10min. 45min. 1min. 45min.
(2) A change has been made so that FAN rotation is continued for a predetermined
time even after switching to power shutoff.
[Notes]
Updating to this version does not involve any change of the setting value for the
MFP printer.
MFP printer.
The time required for the function of preheating and auto power shutoff to be
active will be reset to the factory default value as described above; when a
system administrator performs the operation of saving and/or calling system
settings and then resets to the factory default value, or when "destination
change (Sim26-6)" is implemented.
active will be reset to the factory default value as described above; when a
system administrator performs the operation of saving and/or calling system
settings and then resets to the factory default value, or when "destination
change (Sim26-6)" is implemented.
(4) -2
Main body control-
related
related
If the mounted USB memory is pulled out during restarting after simulation with
restart function is released, LCD screen display may become unstable depending
on the timing. This glitch has been corrected.
restart function is released, LCD screen display may become unstable depending
on the timing. This glitch has been corrected.
(4) -3
Main body control-
related
related
A change has been made so that even if the toner cartridge is not installed, the
automatic developing adjustment sequence is executed and the toner cartridge
uninstalled message is displayed after developing adjustment end.
automatic developing adjustment sequence is executed and the toner cartridge
uninstalled message is displayed after developing adjustment end.
CCE 700
Sharp Electronics (UK) Ltd., Technical Services Group
No. Subject
Description
(4) -4
Main body control-
related
related
F6-00 may occur if the main body returns from power-on mode or 1W night mode N
hours and 5 minutes (N: 0, 1, 2, 3,…) after from power-off mode or 1W night mode.
This glitch has been corrected. If this trouble code occurs in power-on mode, a
power on/off request message is displayed on the LCD of the main body. The
symptom is recovered when the power is turned off/on. If this trouble code occurs
during FAX reception in 1W night mode, the symptom is recovered when the
destination FAX is recalled.
hours and 5 minutes (N: 0, 1, 2, 3,…) after from power-off mode or 1W night mode.
This glitch has been corrected. If this trouble code occurs in power-on mode, a
power on/off request message is displayed on the LCD of the main body. The
symptom is recovered when the power is turned off/on. If this trouble code occurs
during FAX reception in 1W night mode, the symptom is recovered when the
destination FAX is recalled.
(4) -5
Main body control-
related
related
The MFP screen would go blank and the MFP would fail to recover from power save
mode if the MFP was in received fax preview mode and an attempt was made to
recover the MFP from power save mode—either by a fax being received or by the
user pressing the Power Save key—when 10 minutes or more had elapsed since
the MFP entered power save mode after receiving a fax and retaining received data.
This glitch has been corrected.
mode if the MFP was in received fax preview mode and an attempt was made to
recover the MFP from power save mode—either by a fax being received or by the
user pressing the Power Save key—when 10 minutes or more had elapsed since
the MFP entered power save mode after receiving a fax and retaining received data.
This glitch has been corrected.
(4) -6
UI-related
The one touch key displayed in Customers may disappear if the system returns
from 1W night mode when the default of the basic screen for fax/image
transmission is set to "Address Book" and another one touch key is also registered
in Customers. This glitch has been corrected.
from 1W night mode when the default of the basic screen for fax/image
transmission is set to "Address Book" and another one touch key is also registered
in Customers. This glitch has been corrected.
(4) -7
Copy-related
If a copy is made with the book document, etc., pressed from above, the lamp unit
may be caught in the upper cabinet, etc., causing the L3-00 trouble. For this
reason, a change has been made so that when the lamp unit returns, retry is
performed to prevent the L3-00 trouble from occurring.
may be caught in the upper cabinet, etc., causing the L3-00 trouble. For this
reason, a change has been made so that when the lamp unit returns, retry is
performed to prevent the L3-00 trouble from occurring.
(4) -8
Printer-related
The next job may result in a PCL XL error when it receives an invalid XL file without
job end. This glitch has been corrected.
job end. This glitch has been corrected.
(4) -9
Printer-related
Data after the EOI (End of Image) marker in JPEG data of the pasted image may not
be printed because a PCL-XL error occurs as incorrect data. This glitch has been
corrected so that data after the EOI marker is ignored.
be printed because a PCL-XL error occurs as incorrect data. This glitch has been
corrected so that data after the EOI marker is ignored.
(4) -10
Printer-related
If LPD: "banner use" is enabled in WEB page network setting, printing may stop
when the number of the jobs is close to 1,000. This glitch has been corrected.
when the number of the jobs is close to 1,000. This glitch has been corrected.
(4) -11
Printer-related
A watermark may turn into garbled because some parts of the macro processing
sections for watermark processing cannot be processed correctly. This glitch has
been corrected.
sections for watermark processing cannot be processed correctly. This glitch has
been corrected.
(4) -12
Printer-related
If the character string reference pointer is not initialized in character string
comparison for automatic discrimination of PDL data, an incorrect address may be
accessed and, in rare cases, the MFP main body may be restarted during printing.
This glitch has been corrected so that the pointer is initialized under all conditions.
comparison for automatic discrimination of PDL data, an incorrect address may be
accessed and, in rare cases, the MFP main body may be restarted during printing.
This glitch has been corrected so that the pointer is initialized under all conditions.
(4) -13
Printer-related
If an attempt is made to print large quantities of data from the USB1.1 port, a hang-
up may occur without data printed. This glitch has been corrected.
up may occur without data printed. This glitch has been corrected.
(4) -14
Printer-related
Any response may not return even if the PCL command to check Macro/Font
registrations is sent. This glitch has been corrected.
registrations is sent. This glitch has been corrected.
Display
