DOWNLOAD Sharp DX-C310 / DX-C311 / DX-C400 / DX-C401 (serv.man90) Service Manual ↓ Size: 127.63 KB | Pages: 3 in PDF or view online for FREE

Model
DX-C310 DX-C311 DX-C400 DX-C401 (serv.man90)
Pages
3 Few pages! See other manuals at the bottom of the first or last page.
Size
127.63 KB
Type
PDF
Document
Service Manual / Technical Bulletin
Brand
Device
Copying Equipment / CORRECTION OF DSK INSTALLATION
File
dx-c310-dx-c311-dx-c400-dx-c401-sm90.pdf
Date

Sharp DX-C310 / DX-C311 / DX-C400 / DX-C401 (serv.man90) Service Manual / Technical Bulletin ▷ View online

 
 
 
 
Service Information
 
DIGITAL FULL COLOR COPIER(OPTION): MX-C381/C310, etc. 
No.  : CCE-668
Date : Apr. 22, 2009
   
 
C
 
Document Systems Division 
1/1 
SHARP CORPORATION
PROCEDURE FOR THE INSTALLATION OF 
THE DATA SECURITY KIT. 
 
1.Model Name: MX-C310/C311/C380/C381/C400/C401 
 
2.General: 
A wrong description of the Data Security Kit (DSK) provided in the installation manual has 
been found. 
(The whole description given under F on page 7-3 of the installation manual is incorrect.) 
 
Refer to the accompanying paper for the corrected description of the installation procedure. 
 
The revised version of the installation manual will be issued. 
 
 
 
MX-C401  MX-FR12U/FR13U (DATA SECURITY KIT)  7 – 3
3)
Turn ON the power switch on the operation panel.
F. DSK firmware installation
(1)
Entering the boot mode
1)
When the power is turned ON, the main program error is dis-
played.
2)
The above error message is displayed for 10 sec. Then the fol-
lowing message is displayed.
3)
The machine enters the boot mode which indicates that there
is an error in the main program.
(2)
Operations in the boot mode
When the machine is booted in the boot mode, the firmware ver-
sion check, the firmware install, and the version-up operation can
be performed.
* In the boot mode, the following keys are used for operation. Note
that the functions of the keys in the boot mode differ from those
in the normal mode.
(2)-1. Key functions and operations in the boot mode
• 8.5 Inch LCD model
• 4.3 Inch LCD model
(2)-2. Functions in the boot mode
The following two functions are available in the boot mode.
(2)-3. Selection of functions in the boot mode
There are two functions available in the boot mode. These modes
can be selected by pressing MENU key and BACK key.
(3)
Firmware install and version-up procedures in the 
boot mode
1)
Boot the machine in the boot mode. When the Version Check
display is indicated, press [MENU] key, and the machine
enters the Firm Update mode.
2)
Insert the USB memory which includes the update firmware file
(SFU file) into the USB port of the machine, and press [OK]
key.
       
SFU file display
Key name in the 
normal mode
Key name in the 
boot mode
Function
Start key 
(Monochrome)
[OK] key
Performs the selected item or 
function.
Home key
[MENU] key
Selects a menu.
Clear key
[BACK] key
Selects a menu. 
(Serves as a cancel key in the 
execution check screen.)
Job status key
[UP] key
Selects an item.
System setting 
key
[DOWN] key
Selects an item.
1
Main Program Error!!
Emergency Prog Init
Please wait
Version Check
IcM:UNUSUAL
JOB STATUS
IMAGE SEND
HOME
PRINT
READY
DATA
DATA
LINE
SYSTEM
SETTINGS
LOGOUT
DOWN key
UP key
BACK key
MENU key
OK key
Key name in the 
normal mode
Key name in the 
boot mode
Function
Start key 
(Monochrome)
[OK] key
Performs the selected item or 
function.
Home key
[MENU] key
Selects a menu.
Clear key
[BACK] key
Selects a menu. 
(Serves as a cancel key in the 
execution check screen.)
Job status key
[UP] key
Selects an item. 
System setting 
key
[DOWN] key
Selects an item. 
Function
Content
Firmware 
version check 
function
Displays the firmware version of the ICU PWB, the 
SCU PWB, the PCU PWB, and the FAX PWB.
Firmware install 
(update) function
Installs (revises) the firmware by transmitting data 
from the PC which is connected to the ICU PWB, the 
SCU PWB, the PCU PWB, the FAX PWB, and other 
options with the USB memory or the USB cable.
LOGOUT
COPY
PRINT
OK
BACK
JOB STATUS
SYSTEM
SETTINGS
IMAGE SEND
READY
DATA
DATA
LINE
DOWN key
BACK key
UP key
MENU key
OK key
Version Check
IcM:UNUSUAL
Firm Update
From USB Memory
MENU key
BACK key
MENU key
BACK key
Firm Update
From USB Memory
Firm Update
> 0100P200.sfu
: Apr. 20 2009
1
MX-C401  MX-FR12U/FR13U (DATA SECURITY KIT)  7 – 4
3)
Select the firmware file (SFU file) of the target.
Use [UP] key and [DOWN] key to select the target file.
When [OK] key is pressed with the directory name displayed,
the control can enter the lower level directory. (However, one-
step lower level)
When [BACK] key is pressed in the lower level directory, the
control can return to the upper level directory.
4)
Press [OK] key.
The selected firmware file (SFU) is read. (It takes about 1
minute.)
Display of reading file data
5)
After completion of reading, the firmware is installed (updated).
(It takes about 5 - 6 minutes.)
   
Display of firmware install (Update) process
* The abbreviated name of the firmware which is currently
installed (updated) is displayed sequentially.
* The screen may flash instantaneously during the install
(update) process. This is a normal operation.
6)
Check the result of install (update) of the firmware.
Use [UP] key and [DOWN] key to check the results of install
(update) of all the firmware programs.
Display of firmware update results
OK: Update success
NG: Update failed
Not Update: The update process is not executed.
Cause of Update process not executed:
The option unit for the target firmware is not connected.
7)
Turn OFF the power to terminate the boot mode.
1
Firm Update
Reading Data
Firm
Update
IcuM
Firm
Updat
IcuM
Firm
Updat
IcuM
Firm
Updat
IcuM
: Apr. 20 2009
1
Display

Sharp DX-C310 / DX-C311 / DX-C400 / DX-C401 (serv.man90) Service Manual / Technical Bulletin ▷ Download

  • DOWNLOAD Sharp DX-C310 / DX-C311 / DX-C400 / DX-C401 (serv.man90) Service Manual ↓ Size: 127.63 KB | Pages: 3 in PDF or view online for FREE
  • Here you can View online or download the Service Manual / Technical Bulletin for the Sharp DX-C310 / DX-C311 / DX-C400 / DX-C401 (serv.man90) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp DX-C310 / DX-C311 / DX-C400 / DX-C401 (serv.man90) Copying Equipment. Information contained in Sharp DX-C310 / DX-C311 / DX-C400 / DX-C401 (serv.man90) Service Manual / Technical Bulletin (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.