Sharp AR-PE3 (serv.man7) User Manual / Operation Manual ▷ View online
1
1-11
Setting up PostScript or PCL printing with Windows 98/Me
T
O
SET
UP
SMB
PRINTING
ON
W
INDOWS
98/M
E
1.
Double-click the Network Neighborhood icon to display your network environment.
2.
Browse for the printer you want to print to.
Browse for the name entered in Network Setup> Service Setup> Windows
Setup>Server Name. For this information, see the Configuration page.
Setup>Server Name. For this information, see the Configuration page.
N
OTE
:
You can also locate the printer using the Find feature on your Windows
computer. Click Start, choose Find, and then choose Computer. Enter the name of the
printer, and click Find Now.
printer, and click Find Now.
If you are not able to locate your Fiery X3e, contact your network administrator.
3.
Double-click the name of the printer to display enabled print connections.
N
OTE
:
For a description of each print connection, see the
Configuration Guide
.
4.
Double-click the name of the connection you want to print to.
5.
Select Yes to install the PostScript or PCL printer driver and printer description file for
the selected connection.
the selected connection.
The Add Printer Wizard dialog box appears.
6.
Specify whether you print from MS-DOS based programs and click Next.
If you choose Yes, you must capture a printer port before proceeding with the
installation. For details, see your Windows documentation.
installation. For details, see your Windows documentation.
1
1-12
Installing User Software on a Windows Computer
7.
Type a name for the Fiery X3e in the Printer name field and choose whether to make it
the default printer. Click Next.
the default printer. Click Next.
8.
To print a test page, choose Yes and click Finish.
The necessary files are installed to your computer.
If the test page prints successfully, you are ready to print from the computer.
Setting up IPP printing with Windows 98/Me
With Internet Printing Protocol (IPP), print jobs are sent to the Fiery X3e over
the Internet.
the Internet.
IPP printing is supported on Windows 2000/XP/Server 2003 but can be enabled on
Windows 98/Me computers by installing the wpnpins.exe client file (available on the
Windows Me CD or the Windows 2000/XP/Server 2003 CD). For more information
about obtaining and installing this client, contact the Microsoft Corporation or
Microsoft Technical Support.
Windows 98/Me computers by installing the wpnpins.exe client file (available on the
Windows Me CD or the Windows 2000/XP/Server 2003 CD). For more information
about obtaining and installing this client, contact the Microsoft Corporation or
Microsoft Technical Support.
N
OTE
:
The IPP setup procedures are performed after installing the appropriate printer
drivers. See
“To install the PostScript or PCL printer driver for Windows 98/Me”
on
page 1-2.
B
EFORE
YOU
BEGIN
1.
Prepare the Fiery X3e for TCP/IP printing.
2.
Make sure the Fiery X3e is configured for IPP printing.
For more information, see the
Configuration Guide
.
3.
Specify the printing destination on your computer.
T
O
SET
UP
IPP
PRINTING
WITH
W
INDOWS
98/M
E
1.
Click Start, choose Settings, and then choose Printers.
2.
In the Printers windows, right-click the icon for the Fiery X3e PostScript printer driver
and choose Properties.
and choose Properties.
3.
Click the Details tab and click Add Port.
The Add Port dialog box appears.
1
1-13
Setting up PostScript or PCL printing with Windows NT 4.0
4.
Enter the network path for the printer.
The path for the printer is the IP address or the DNS name, followed by
ipp
, and then
by the Fiery connection you want to print to (
print
,
hold
, or
direct
). Insert slashes
between the elements, for example,
http://10.10.10.150/ipp/print
.
5.
Click OK.
Setting up PostScript or PCL printing with
Windows NT 4.0
Windows NT 4.0
To set up the Fiery X3e as a PostScript or PCL printer, you must install the PostScript
or PCL printer driver for Windows NT 4.0 and the corresponding printer description
files. You must also configure the print connection between the computer and the
Fiery X3e. If you are printing over a network, you must configure a network
connection.
or PCL printer driver for Windows NT 4.0 and the corresponding printer description
files. You must also configure the print connection between the computer and the
Fiery X3e. If you are printing over a network, you must configure a network
connection.
N
OTE
:
The procedures for setting up printing with the PostScript and PCL printer
drivers are similar. The following illustrations show the PostScript driver. Any
differences are noted.
differences are noted.
Installing the printer driver for Windows NT 4.0
The following procedures describe the installation of a local printer. Adding a printer
to a local system requires that you log in to your local Windows NT 4.0 computer
(not the network server domain) and that you are a member of the Administrators
group. The procedure for adding a network printer is similar to adding a port. See
to a local system requires that you log in to your local Windows NT 4.0 computer
(not the network server domain) and that you are a member of the Administrators
group. The procedure for adding a network printer is similar to adding a port. See
“Completing the Windows NT 4.0 TCP/IP and LPR connection”
on page 1-20.
1
1-14
Installing User Software on a Windows Computer
T
O
INSTALL
THE
P
OST
S
CRIPT
OR
PCL
PRINTER
DRIVER
FOR
W
INDOWS
NT 4.0
1.
If you are installing from the User Software CD, insert it into the CD-ROM drive.
2.
Click Start, choose Settings, and then choose Printers.
3.
Double-click Add Printer.
4.
To install a printer locally, select My Computer and click Next.
My Computer is available if you logged in to a computer on which you have
Administrator privileges. If it is not available, you can add a network printer.
The procedure is similar to adding a port (see
Administrator privileges. If it is not available, you can add a network printer.
The procedure is similar to adding a port (see
page 1-21
).
5.
Select LPT1: and click Next.
This is a general installation that works for the parallel port connection. You can add
a network port later, according to your network type.
a network port later, according to your network type.
6.
In the dialog box displaying lists of manufacturers and printers, click Have Disk.
The Install From Disk dialog box prompts you for the disk.
Click on the first or last page to see other AR-PE3 (serv.man7) service manuals if exist.