Sharp AR-PE3 (serv.man7) User Manual / Operation Manual ▷ View online
xvii
User software
N
OTE
:
You can install PostScript and PCL printer drivers and printer description files
from the User Software CD or from the Fiery X3e with the Installer WebTool.
For instructions, see
For instructions, see
“Using the Installer WebTool”
on page 2.
Color management files
ICM (Windows) and ColorSync (Mac OS) color
management files that enable you to maintain
consistent color from your original artwork to the
colors displayed on your monitor and then to the
printed output.
management files that enable you to maintain
consistent color from your original artwork to the
colors displayed on your monitor and then to the
printed output.
Color reference files
Reference pages that you can print to view the range of
colors available on your Fiery X3e. For the most
predictable color results, refer to these pages when
defining colors in applications. For more information
about color management, see the
colors available on your Fiery X3e. For the most
predictable color results, refer to these pages when
defining colors in applications. For more information
about color management, see the
Color Guide
.
MRJ (Mac OS 9 only)
Mac OS Runtime for Java (MRJ) is required by all
Java-based Fiery utilities. If MRJ is not detected when
you install these utilities, the MRJ installer is
automatically launched.
Java-based Fiery utilities. If MRJ is not detected when
you install these utilities, the MRJ installer is
automatically launched.
xviii
Introduction
Fiery WebTools
Fiery WebTools allow you to manage your Fiery X3e remotely from the Internet or
from your company’s intranet. You access Fiery WebTools from the Fiery WebTools
home page.
from your company’s intranet. You access Fiery WebTools from the Fiery WebTools
home page.
System requirements
System requirements are described in detail in the printed
Quick Start Guide
provided
in your media pack.
Fiery WebTools
Summary
For more information
Status
Shows you the jobs currently processing
and printing.
and printing.
See the
Printing Guide
.
WebLink
Provides a link to another web page,
provided you have a valid Internet
connection.
provided you have a valid Internet
connection.
See the
Printing Guide
and
the
Configuration Guide
.
Installer
Allows you to download Fiery X3e
printer file installers directly from the
server.
printer file installers directly from the
server.
See
Chapter 3
.
WebDownloader
Allows you to download PostScript,
PCL, EPS, and PDF files to the
Fiery X3e.
PCL, EPS, and PDF files to the
Fiery X3e.
See the
Printing Guide
.
WebSetup
(Windows only)
(Windows only)
Allows you to modify the Fiery X3e
configuration (Setup) remotely. This
function requires the Administrator
password, if one has been set.
configuration (Setup) remotely. This
function requires the Administrator
password, if one has been set.
See the
Configuration Guide
.
WebScan
Allows you to view and print images that
have been scanned to the copier/printer.
have been scanned to the copier/printer.
See the
Printing Guide
.
1
1-1
Setting up PostScript or PCL printing with Windows 98/Me
This chapter describes the procedures for installing software and setting up printing
from a computer using a supported version of Windows. For the Windows versions
supported, see the
from a computer using a supported version of Windows. For the Windows versions
supported, see the
Quick Start Guide
.
The general steps for installing the software are as follows:
• Install the PostScript printer driver or PCL printer driver and corresponding printer
driver files and set up the printer driver to communicate with the Fiery X3e.
• Install Fiery utilities and user software—Fiery Mail Port, Fiery Remote Scan, Fiery
Downloader, ColorWise Pro Tools, and Command WorkStation.
• Install Adobe Acrobat and PitStop for use with DocBuilder Pro.
• Configure the connection for Fiery utilities and user software.
• Copy additional files from the User Software CD as required.
In addition to using the User Software CD, you can download printer drivers from the
Fiery X3e with the Installer WebTool (if the administrator has enabled Internet access
to the Fiery X3e). For instructions, see
Fiery X3e with the Installer WebTool (if the administrator has enabled Internet access
to the Fiery X3e). For instructions, see
“Using the Installer WebTool”
on page 3-2.
Once you download the printer files, the installation process is identical to installing
from the User Software CD.
from the User Software CD.
Setting up PostScript or PCL printing with
Windows 98/Me
Windows 98/Me
To set up the Fiery X3e as a PostScript or PCL printer, you must install the PostScript
or PCL printer driver for Windows 98/Me and the corresponding printer description
files. You must also configure either a local connection for printing directly or a
network connection for printing over the network.
or PCL printer driver for Windows 98/Me and the corresponding printer description
files. You must also configure either a local connection for printing directly or a
network connection for printing over the network.
If you are printing using SMB (Server Message Block), you can connect to the
Fiery X3e and install the printer drivers in a single procedure. For more information,
see
Fiery X3e and install the printer drivers in a single procedure. For more information,
see
“Setting up SMB printing with Windows 98/Me”
on page 1-10.
Chapter 1:
Installing
User Software
on a Windows
Computer
Installing
User Software
on a Windows
Computer
1
1-2
Installing User Software on a Windows Computer
N
OTE
:
The procedures for setting up printing with the PostScript and PCL printer
drivers are similar. The following illustrations show the PostScript drivers. Any
differences are noted.
differences are noted.
Installing the PostScript or PCL printer driver for
Windows 98/Me
Windows 98/Me
The following procedure describes installing the printer driver from the User
Software CD or from the Installer WebTool. Subsequent procedures describe
configuring installable options and setting up the printer connection.
Software CD or from the Installer WebTool. Subsequent procedures describe
configuring installable options and setting up the printer connection.
N
OTE
:
The following procedures display Windows 98 illustrations for the PostScript
printer driver. Windows Me and PCL printer driver differences are noted.
T
O
INSTALL
THE
P
OST
S
CRIPT
OR
PCL
PRINTER
DRIVER
FOR
W
INDOWS
98/M
E
1.
Click Start, choose Settings, and then choose Printers.
2.
In the Printers window, double-click the Add Printer icon and click Next.
3.
Specify printing using a Local printer and click Next.
This procedure describes the installation of a local printer. You can modify the
connection later, according to your network type.
connection later, according to your network type.
4.
In the dialog box displaying lists of manufacturers and printers, click Have Disk.
The Install From Disk dialog box prompts you for the disk.
5.
If you are installing from the CD, type the name of the CD-ROM drive (for example,
D:\), and click Browse. Browse to English\Prntdrvr\Ps_drvr\Win_9x_ME or
English\Prntdrvr\Pcl6_drvr\Win_9x_ME.
D:\), and click Browse. Browse to English\Prntdrvr\Ps_drvr\Win_9x_ME or
English\Prntdrvr\Pcl6_drvr\Win_9x_ME.
If you are installing from the files you downloaded using the Installer WebTool,
browse to prntdrvr\Prntdrvr\Ps_drvr\Win_9x_ME or
prntdrvr\Prntdrvr\Pcl6_drvr\Win_9x_ME.
browse to prntdrvr\Prntdrvr\Ps_drvr\Win_9x_ME or
prntdrvr\Prntdrvr\Pcl6_drvr\Win_9x_ME.
6.
Make sure “Oemsetup.inf” is selected and click OK.
The path is copied to the Install From Disk dialog box.
Click on the first or last page to see other AR-PE3 (serv.man7) service manuals if exist.