Sharp AR-PB2 (serv.man7) User Manual / Operation Manual ▷ View online
USING THE OPERATION PANEL
39
Prohibit Rotated Output
If this program is not set, the print image will be rotated when the orientation of the print image
does not match that of the available copy paper. If this program is set, a print image specified to be
printed on A4 or 8-1/2
does not match that of the available copy paper. If this program is set, a print image specified to be
printed on A4 or 8-1/2
"
x 11
"
paper will not be rotated and printed on A4R or 8-1/2
"
x 11"R paper
even if the specified paper is not loaded in any tray.
To prohibit rotated output, press the “PROHIBIT ROTATED OUTPUT” box to display a check mark.
To restore rotated output, press the checked box again to clear the check mark.
Prohibit Bypass-Tray Selection
If this program is set, the bypass tray will not be selected for a print job that specifies auto paper
selection or during auto tray switching.
selection or during auto tray switching.
To prohibit bypass tray selection, press the “PROHIBIT BYPASS-TRAY SELECTION” box to
display a check mark.
display a check mark.
To restore bypass tray selection, press the checked box again to clear the check mark.
Prohibit Auto Tray Switching
This program prevents automatic switching between paper trays in print jobs. This program does
not affect the auto tray switching function in the copier mode.
not affect the auto tray switching function in the copier mode.
To prohibit automatic tray switching, press the “PROHIBIT AUTO TRAY SWITCHING” box to
display a check mark.
display a check mark.
To restore automatic tray switching, press the checked box again to clear the check mark.
Prohibit Test Page Printing
This program prevents printing test pages from the printer configuration menu. If this program is
set, the test page print functions will not appear in the printer configuration menu.
set, the test page print functions will not appear in the printer configuration menu.
To prohibit test page printing, press the “PROHIBIT TEST PAGE PRINTING” box to display a
check mark.
check mark.
To restore test page printing, press the checked box again to clear the check mark.
USING THE OPERATION PANEL
40
Prohibit Changes to Printer Settings
This program prevents modification of basic printer settings in the printer configuration menu. If this
program is set, the printer settings functions will not appear in the printer configuration menu.
program is set, the printer settings functions will not appear in the printer configuration menu.
To prohibit modification of printer settings, press the “PROHIBIT CHANGES TO PRINTER
SETTINGS” box to display a check mark.
SETTINGS” box to display a check mark.
To enable modification of printer settings, press the checked box again to clear the check mark.
Prohibit Changes to Interface Settings
This program prevents modification of interface settings in the printer configuration menu. If this
program is set, the interface settings functions will not appear in the printer configuration menu.
program is set, the interface settings functions will not appear in the printer configuration menu.
To prohibit modification of interface settings, press the “PROHIBIT CHANGES TO INTERFACE
SETTINGS” box to display a check mark.
SETTINGS” box to display a check mark.
To enable modification of interface settings, press the checked box again to clear the check mark.
Prohibit Changes to Network Settings
This program prevents modification of network settings in the printer configuration menu. If this
program is set, the network settings functions will not appear in the printer configuration menu.
program is set, the network settings functions will not appear in the printer configuration menu.
To prohibit modification of network settings, press the “PROHIBIT CHANGES TO NETWORK
SETTINGS” box to display a check mark.
SETTINGS” box to display a check mark.
To enable modification of network settings, press the checked box again to clear the check mark.
Chapter 5 Printer Troubleshooting
41
Introduction
Always check for error messages on your computer’s monitor screen and the printer operation
panel anytime you are unable to complete a print job. These messages can give you easy-to-follow
directions. If the messages do not give specific instructions, check the troubleshooting list on page
43.
panel anytime you are unable to complete a print job. These messages can give you easy-to-follow
directions. If the messages do not give specific instructions, check the troubleshooting list on page
43.
For problems related to paper misfeed, toner empty, toner container full, and other related copier problems, see the
copier operation manual.
Notes on Printing Lengthy Documents
When printing a lengthy document, the document memory in the printer may become full of print
data. Also a lengthy document may exceed the limit of the output tray. The printer will operate as
follows depending on the conditions.
data. Also a lengthy document may exceed the limit of the output tray. The printer will operate as
follows depending on the conditions.
1. If face down output is specified:
A. If printing one copy of a lengthy document is specified:
Printing will stop when the number of printed sheets reaches the limit of the output tray (if
the tray can detect the limit). When the printed paper is removed from the output tray,
printing will resume.
the tray can detect the limit). When the printed paper is removed from the output tray,
printing will resume.
B. If printing multiple copies of a lengthy document is specified and the key operator program
“Output Method When Memory Is Full” (page 37) is set to “1 SET”:
The printer will print only one set followed by a notice page at the end of the job.
C. If printing multiple copies of a lengthy
document is specified and the key
operator program “Output Method When
Memory Is Full” (page 37) is set to
“MULTI-SET”:
operator program “Output Method When
Memory Is Full” (page 37) is set to
“MULTI-SET”:
Printed sheets will be divided into blocks*
as shown in the illustration. A separator
sheet will be inserted between each
block. Finally, a notice page will be
output. The number of pages in a block
can be changed using the key operator
program “Memory Reserved for Printer”.
See page 37.
as shown in the illustration. A separator
sheet will be inserted between each
block. Finally, a notice page will be
output. The number of pages in a block
can be changed using the key operator
program “Memory Reserved for Printer”.
See page 37.
For the models without hard disk drive and the models
with a 2 GB hard disk drive, the key operator program
“Memory Reserved for Printer” is not available. In case
of those without hard disk drive, the number of pages in
a block is variable according to the memory use and
those with a 2 GB drive allow 320 pages in a block.
“Memory Reserved for Printer” is not available. In case
of those without hard disk drive, the number of pages in
a block is variable according to the memory use and
those with a 2 GB drive allow 320 pages in a block.
NOTE
Page 60
Page 1
Page 1
Page 60
Page 120
Page 61
Page 61
Page 120
Notice page
Separator sheet
Separator sheet
Separator sheet
1 block
NOTE
Example:
Two sets of 120-page document are
printed in 60-page blocks.
Two sets of 120-page document are
printed in 60-page blocks.
PRINTER TROUBLESHOOTING
42
2.
If face up output is specified:
A. If printing one copy of a lengthy document is
specified:
Printed sheets will be divided into blocks* as
shown in the illustration. A separator sheet
will be inserted between each block. Finally,
a notice page will be output.
shown in the illustration. A separator sheet
will be inserted between each block. Finally,
a notice page will be output.
B. If printing multiple copies of a lengthy
document is specified and the key operator
program “Output Method When Memory Is
Full” (page 37) is set to “1 SET”:
program “Output Method When Memory Is
Full” (page 37) is set to “1 SET”:
The printer will print only one set in blocks*
as in 2-A and output a notice page at the end
of the job.
as in 2-A and output a notice page at the end
of the job.
C. If printing multiple copies of a lengthy
document is specified and the key operator
program “Output Method When Memory Is
Full” (page 37) is set to “MULTI-SET”:
program “Output Method When Memory Is
Full” (page 37) is set to “MULTI-SET”:
Printed sheets will be divided into blocks* as
shown in the illustration. A separator sheet
will be inserted between each block. Finally,
a notice page will be output. The number of
pages in a block can be changed using the
key operator program “Memory Reserved for
Printer”. See page 37.
shown in the illustration. A separator sheet
will be inserted between each block. Finally,
a notice page will be output. The number of
pages in a block can be changed using the
key operator program “Memory Reserved for
Printer”. See page 37.
*
The number of pages in a block varies
with the paper size, setting of the key
operator program “Memory Reserved for
Printer” and printer models.
with the paper size, setting of the key
operator program “Memory Reserved for
Printer” and printer models.
For the models without hard disk drive and the models with
a 2 GB hard disk drive, the key operator program “Memory
Reserved for Printer” is not available. In case of those
without hard disk drive, the number of pages in a block is
variable according to the memory use and those with a 2
GB drive allow 320 pages in a block.
Reserved for Printer” is not available. In case of those
without hard disk drive, the number of pages in a block is
variable according to the memory use and those with a 2
GB drive allow 320 pages in a block.
60
1
Page 61
Page 120
Separator
sheet
Page 60
1 block
Page 1
61
Notice page
120
Page 61
Page 120
Separator
sheet
Page 60
1 block
Page 1
Notice page
Separator
sheet
1 block
Separator
sheet
Separator
sheet
Page 60
Page 1
Page 61
Page 120
Page 120
Page 61
Notice page
Page 1
Page 60
NOTE
Example:
Two sets of 120-page document are
printed in 60-page blocks.
Two sets of 120-page document are
printed in 60-page blocks.
Click on the first or last page to see other AR-PB2 (serv.man7) service manuals if exist.