Sharp AR-P15 (serv.man12) Service Manual / Technical Bulletin ▷ View online
Sharp Electronics (UK) Ltd., NIS Systems Support
NIS Bulletin 069
Page: 5 of 18
Locate the correct context and highlight the desired printer object. Click the OK button.
Now the print server is successfully associated with the printer. Click OK again to close the window.
Sharp Electronics (UK) Ltd., NIS Systems Support
NIS Bulletin 069
Page: 6 of 18
Highlight the same “container” that you chose for the print server you just created. Press the [Insert]
key to create the Print Queue. Scroll to the Print Queue object and click OK.
Enter a Print Queue name and Select a NetWare volume for the print queue by clicking the volume
icon. Highlight the location for the Print Queue and click OK. Click Create to complete the print queue
creation.
Note:
As only the DIRECT queue is available on a standard AR-P15, the print queue name must be
“anything”_direct (as shown above)
If the optional AR-PK3 is installed, the print queue name(s) can be either “anything”_print,
“anything”_hold or “anything_direct, depending upon the queue you wish to use.
“anything”_hold or “anything_direct, depending upon the queue you wish to use.
Once you have defined the Print Server, the Printer and the Queue, complete the association of the
relevant entities with each other by Double clicking on the newly created printer object. Click on
Assignments tab and then on the Add button.
Sharp Electronics (UK) Ltd., NIS Systems Support
NIS Bulletin 069
Page: 7 of 18
Click the desired Print Queue and click OK.
Sharp Electronics (UK) Ltd., NIS Systems Support
NIS Bulletin 069
Page: 8 of 18
Confirm the settings and click the OK button.
Verify the connection in NetWare Administrator. Right-click on the print server object, select Details
and then click on Print Layout.
The screen shot below confirms that the Print Server, Queue and Printer objects are all associated.
Note:
The red exclamation mark will remain until the ARP15 (AR651) has been configured and is
logged on to the NetWare Server. Configuration for NetWare 4.xx / 5.xx using NetWare
Administrator is now complete.
The red exclamation mark will remain until the ARP15 (AR651) has been configured and is
logged on to the NetWare Server. Configuration for NetWare 4.xx / 5.xx using NetWare
Administrator is now complete.
Click on the first or last page to see other AR-P15 (serv.man12) service manuals if exist.