Sharp AR-M550 (serv.man28) User Manual / Operation Manual ▷ View online
MISFEED REMOVAL
2-21
2
Misfeed in the paper feed area
■
■
■
■ Misfeed in paper tray 1 - tray 2
1
Remove the duplex unit.
Grasp the finger hold
and gently open the unit.
and gently open the unit.
2
Remove the misfed paper.
Turn roller rotating knob
A in the direction of the
arrow to remove the
misfed paper.
A in the direction of the
arrow to remove the
misfed paper.
3
If misfed paper is not found in step 2, pull
out paper tray 1 - tray 2 and remove the
misfed paper.
out paper tray 1 - tray 2 and remove the
misfed paper.
Grasp the finger hold
and gently open the unit.
Pull the tray all the way
out until it stops.
and gently open the unit.
Pull the tray all the way
out until it stops.
●
●
●
●If paper is misfed in tray 1 (left-side tray)...
Lift the paper guide and
remove the misfed
paper.
Be sure to replace the
paper guide in its
original position after
removing the paper.
remove the misfed
paper.
Be sure to replace the
paper guide in its
original position after
removing the paper.
●
●
●
●If paper is misfed in tray 2 (right-side tray)...
When using tray 2,
check the paper transfer
unit inside the tray and
remove any misfed
paper.
check the paper transfer
unit inside the tray and
remove any misfed
paper.
4
Gently close paper tray 1 - tray 2.
Push the tray all the way
back in.
Make sure that the
misfeed message no
longer appears (the
normal message display
should appear).
back in.
Make sure that the
misfeed message no
longer appears (the
normal message display
should appear).
5
Gently close the duplex unit.
After closing, confirm
that the misfeed
message has been
cleared and the normal
display appears.
that the misfeed
message has been
cleared and the normal
display appears.
NOTE
Be sure to follow the misfeed removal sequence. Do not pull the tray out immediately as the misfeed may have
occurred with paper partially fed out of the tray. Open the left cover and see if there is misfed paper first (steps 1
and 2). If you open the tray without checking, the partially fed paper may tear and leave torn pieces in the machine,
increasing the difficulty of removal.
occurred with paper partially fed out of the tray. Open the left cover and see if there is misfed paper first (steps 1
and 2). If you open the tray without checking, the partially fed paper may tear and leave torn pieces in the machine,
increasing the difficulty of removal.
NOTE
A misfeed may occur inside the compartment, so
please check the entire compartment carefully.
please check the entire compartment carefully.
Roller rotating knob A
MISFEED REMOVAL
2-22
■
■
■
■ Misfeed in paper tray 3
1
Remove the duplex unit.
Grasp the finger hold
and gently open the unit.
and gently open the unit.
2
Remove the misfed paper.
Turn roller rotating knob
A in the direction of the
arrow to remove the
misfed paper.
A in the direction of the
arrow to remove the
misfed paper.
3
Open the lower cover on the left side of the
machine.
machine.
Grasp the finger hold
and gently open the unit.
and gently open the unit.
4
Remove the misfed paper.
Be careful not to tear the
misfed paper during
removal.
misfed paper during
removal.
5
Close the lower cover on the left side of
the machine.
the machine.
6
If misfed paper is not found in step 3, pull out
paper tray 3 and remove the misfed paper.
paper tray 3 and remove the misfed paper.
Pull the tray all the way
out until it stops.
Check the paper
transfer unit inside the
tray.
Be careful not to tear the
misfed paper during
removal.
out until it stops.
Check the paper
transfer unit inside the
tray.
Be careful not to tear the
misfed paper during
removal.
7
Gently close paper tray 3.
Push the tray all the way
back in.
back in.
8
Gently close the duplex unit.
After closing, confirm
that the misfeed
message has been
cleared and the normal
display appears.
that the misfeed
message has been
cleared and the normal
display appears.
■
■
■
■ Misfeed in the tray 4
To remove a misfeed in tray 4, follow the same steps as in "Misfeed in paper tray 3".
NOTE
A misfeed may occur inside the compartment, so
please check the entire compartment carefully.
please check the entire compartment carefully.
Roller rotating knob A
MISFEED REMOVAL
2-23
2
■
■
■
■ Misfeed in the bypass tray
1
Remove the misfed paper from the bypass
tray.
tray.
Be careful not to tear the
misfed paper during
removal.
misfed paper during
removal.
2
If you did not find a misfeed in step 1, open
the side cover and remove the misfeed.
the side cover and remove the misfeed.
3
Gently close the side cover.
4
Remove tray 1 - tray 2.
Grasp the finger hold
and gently open the unit.
Pull the tray all the way
out until it stops.
and gently open the unit.
Pull the tray all the way
out until it stops.
5
Remove the misfed paper.
Check the paper
transfer unit inside the
tray and remove any
misfed paper.
transfer unit inside the
tray and remove any
misfed paper.
6
Gently close paper tray 1 - tray 2.
Push the tray all the way
back in.
Make sure that the
misfeed message no
longer appears (the
normal message display
should appear).
back in.
Make sure that the
misfeed message no
longer appears (the
normal message display
should appear).
NOTE
If a misfeed occurs during printing from the bypass
tray while paper is being loaded in tray 1 - tray 2,
push tray 1 - tray 2 back in to close it, and then pull
the tray out again.
tray while paper is being loaded in tray 1 - tray 2,
push tray 1 - tray 2 back in to close it, and then pull
the tray out again.
MISFEED REMOVAL
2-24
■
■
■
■ Misfeed in the tray 5
1
Open the side cover.
2
Remove the misfed paper.
Be careful not to tear the
misfed paper during
removal.
misfed paper during
removal.
3
Gently close the side cover.
4
Close the bypass tray.
5
Open the top cover of tray 5.
6
Open the top cover and remove the misfed
paper.
paper.
After removing the
misfed paper, close the
top cover.
misfed paper, close the
top cover.
7
Remove tray 1 - tray 2.
Grasp the finger hold
and gently open the unit.
Pull the tray all the way
out until it stops.
and gently open the unit.
Pull the tray all the way
out until it stops.
8
Remove the misfed paper.
Check the paper
transfer unit inside the
tray and remove any
misfed paper.
transfer unit inside the
tray and remove any
misfed paper.
9
Gently close paper tray 1 - tray 2.
Push the tray all the way
back in.
Make sure that the
misfeed message no
longer appears (the
normal message display
should appear).
back in.
Make sure that the
misfeed message no
longer appears (the
normal message display
should appear).
NOTE
If a misfeed occurs in the following situation, push
tray 1 - tray 2 back in to close it and then pull the tray
out again:
● A misfeed occurs during printing from tray 5 while
tray 1 - tray 2 back in to close it and then pull the tray
out again:
● A misfeed occurs during printing from tray 5 while
paper is being loaded in tray 1 or tray 2.
Click on the first or last page to see other AR-M550 (serv.man28) service manuals if exist.