DOWNLOAD Sharp AR-M550 (serv.man15) Service Manual ↓ Size: 905.4 KB | Pages: 98 in PDF or view online for FREE

AR-M550/M620  SIMULATION  8 - 33

(10 lines, 80 digits = 800 characters)

PPD_NM2

PPD1 not-reached jam (Multi-stage tray 2 feed 
paper)

PPD_NLC

PPD1 not-reached jam (LCC paper feed paper)

PPD_NAD

PPD1 not-reached jam (ADU re-feed paper)

PPD_SMF

PPD1 remaining jam (Manual feed tray feed 
paper)

PPD_ST1

PPD1 remaining jam (Tandem tray 1 feed 
paper)

PPD_ST2

PPD1 remaining jam (Tandem tray 2 feed 
paper)

PPD_SM1

PPD1 remaining jam (Multi-stage tray 1 feed 
paper)

PPD_SM2

PPD1 remaining jam (Multi-stage tray 2 feed 
paper)

PPD_SLC

PPD1 remaining jam (LCC paper feed paper)

PPD_SAD

PPD1 remaining jam (ADU re-feed paper)

PPD_PRI

PPD1 jam (Image ready request is not sent 
from ICU.)

PSD_N

PSD not-reached jam (currently not detected)

PSD_S

PSD remaining jam (currently not detected)

POD1_N

POD1 not-reached jam

POD1_S

POD1 remaining jam

POD1_LDV

POD1 jam (LCV is turned OFF.)

POD2_N

POD2 not-reached jam 

POD2_SR

POD2 remaining jam (When paper is 
discharged on the right side of the machine.)

POD2_SL

POD2 remaining jam (When paper is 
discharged on the left side of the machine.)

AINPD_N

ADU paper entry sensor not-reached jam 

AINPD_S

ADU paper entry sensor remaining jam

APPD1_N

ADU transport sensor 1 not-reached jam

APPD1_S

ADU transport sensor 1 remaining jam

APPD2_N

ADU transport sensor 2 not-reached jam 

APPD2_S

ADU transport sensor 2 remaining jam

DESK1

Multi-stage tray 1 paper feed jam (M1PFD not-
reached)

M1PFD_N2

M1PFD not-reached jam (Multi-state2 tray feed 
paper)

M1PFD_S1

M1PFD remaining jam (Multi-stage 1 tray feed 
paper)

M1PFD_S2

M1PFD remaining jam (Multi-stage 2 tray feed 
paper)

DESK2

Multi-stage tray 2 paper feed jam (M2PFD not-
reached)

M2PFD_S

M2PFD remaining jam

MPRD2_N2

MPRD2 not-reached jam (Tandem paper feed 
tray 2 feed paper) 

MPRD2_NM

MPRD2 not reached jam (Manual paper feed 
tray feed paper)

MPRD2_NL

MPRD2 not-reached jam (LCC paper feed 
paper) 

MPRD2_S2

MPRD2 remaining jam (Tandem tray 2 feed 
paper)

MPRD2_SM

MPRD2 remaining jam (Manual paper feed tray 
feed paper)

MPRD2_SL

MPRD2 remaining jam (LCC paper feed paper)

TRAY2

Tandem paper feed tray 2 paper feed jam 
(MPRD1 not-reached)

MPRD1_NM

MPRD1 not-reached jam (Manual paper feed 
tray feed paper)

Code

Description

MPRD1_NL

MPRD1 not-reached jam (LCC paper feed 
paper)

MPRD1_S2

MPRD1 remaining jam (Tandem paper feed 
tray 2 feed paper)

MPRD1_SM

MPRD1 remaining jam (Manual paper feed tray 
feed paper)

MPRD1_SL

MPRD1 remaining jam (LCC paper feed paper)

MPFD2_NM

MPFD2 not-reached jam (Manual paper feed 
tray feed paper)

MPFD2_NL

MPFD2 not-reached jam (LCC paper feed 
paper)

MPFD2_SM

MPFD2 remaining jam (Manual paper feed tray 
feed paper)

MPFD2_SL

MPFD2 remaining jam (LCC paper feed paper)

BPT

Manual paper feed tray paper feed jam (MPFD1 
not-reached)

MPFD1_S

MPFD1 remaining jam 

LPPD_N

LPPD not-reached jam 

LPPD_S

LPPD remaining jam 

LPPD_LCC

LPPD jam (No reply in a certain time after 
preliminary paper feed from LCC and issuing 
the paper feed command.)

LCC

LCC paper feed jam (LTD not-reached jam )

LTD_S

LTD remaining jam 

FES_N

FINISHER Inlet port sensor not-reached jam 

FES_S

FINISHER Inlet port sensor remaining jam 

FFPS_N

FINISHER Saddle not-reached jam 

FFPS_S

FINISHER Saddle remaining jam 

FEXIT_S

FINISHER Bundle exit remaining jam 

FSTPL

FINISHER Staple jam

FPNCH

FINISHER Punch jam

FDOP

FINISHER Door open jam 

FIN_TIME

FINISHER Abnormal paper interval jam 

REG_SEN_N

INSERTER Resist sensor not-reached jam 
(When inserter paper feed)

REG_SEN_S

INSERTER Resist sensor remaining jam (When 
inserter paper feed)

TIM_SEN_N

INSERTER Timing sensor not-reached jam 
(When inserter paper feed)

TIM_SEN_S

INSERTER Timing sensor remaining jam 
(When inserter paper feed)

HI_SEN_NI

INSERTER Paper exit sensor not-reached jam 
(When inserter paper feed)

HI_SEN_NP

INSERTER Paper exit sensor not-reached jam 
(Main unit paper feed)

HI_SEN_S

INSERTER Paper exit sensor remaining jam

H_SEN_NF

INSERTER Reverse sensor not-reached jam 
(When entering into the reverse path.) 

H_SEN_NB

INSERTER Reverse sensor not-reached jam 
When discharging to the reverse path.)

H_SEN_SF

INSERTER Reverse sensor remaining jam 
(When entering into the reverse path.)

H_SEN_SB

INSERTER Reverse sensor remaining jam 
(When discharging to the reverse path.)

Code

Description

SIMULATION 22-3

PAPER JAM HISTORY.
*******,*******,*******,*******,*******,*******,*******,*******,*******,*******
*******,*******,*******,*******,*******,*******,*******,*******,*******,*******
*******,*******,*******,*******,*******,*******,*******,*******,*******,*******
*******,*******,*******,*******,*******,*******,*******,*******,*******,*******
*******,*******,*******,*******,*******,*******,*******,*******,*******,*******
···············

AR-M550/M620  SIMULATION  8 - 34

The trouble history is displayed.

The trouble history is displayed sequentially from the latest one. The
max. 100 items can be stored. (The oldest one is deleted sequentially.
The trouble position can be identified by the data.)

(10 lines, 80 digits = 800 characters)

1)The ROM version of each section can be checked. When there is
any problem in the software, use this simulation to check the ROM ver-
sion of each section and revise the version if necessary.

When installing or servicing this machine, execute this simulation to
print and save various setting and adjustment data for next servicing.
(For example, memory trouble, PWB replacement, etc.)

1) Enter 1 with 10-key.

2) Press [START] key.

The various setting and adjustment data are printed out. (The print
paper cannot be selected optionally.)

The key operator code is displayed.

22-4

Adjustment/Setup/Operation data output/Check 
(Display/Print)

Used to check the trouble (self diag) history.

Trouble

22-5

Other

Used to check the ROM version of each unit (section).

Software

S/N

Engine section serial number

MFP

MFP controller

(LANGUAGE)

(Language version)

BOOT

MFP controller BOOT ROM

FAX

FAX controller

PCU

PCU controller

SCANNER

Scanner controller

FINISHER

Finisher controller

SADDLE UNIT

Saddle unit

LCC

Side LCC

INSERTER

Inserter

SIMULATION 22-4

TROUBLE HISTORY.
**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**
**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**
**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**
**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**
**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**,**-**
···············

SIMULATION 22-5

ROM VERSION DATA DISPLAY.

S/N:   0000000000

MFP:           1.00   (LANGUAGE:  1.00)

PCU:           1.00            BOOT:      1.00

SCANNER:       1.00             FAX:      1.00

FINISHER:      1.00

SADDLE UNIT:   1.00             LCC:      1.00

INSERTER:      1.00

22-6

Adjustment/Setup/Operation data output/Check 
(Display/Print)

Used to output the list of the setting and adjustment 
data (simulations, FAX soft switch, counters).

Data

Adjust/Setting data

0

TRAY SELECT

TRAY SELECT auto only (Selection is not 
allowed.)

1

PRINT START

PRINT START

Select 1 and press 
[START] key.

Press [CUSTOMSETTING] key or [START] 
key.

22-7

Adjustment/Setup/Operation data output/Check 
(Display/Print)

Used to display the key operator code. (This simulation 
is used when the customer forgets the key operator 
code.)

Data

User data

SIMULATION 22-6

DATA PRINT MODE. SELECT SETTING, AND PRESS START.

0. TRAY SELECT  :AUTO ONLY

1. PRINT START

1

SIMULATION 22-6

0

DATA PRINT MODE. EXECUTING···.

0. TRAY SELECT  :

1

SIMULATION 22-7

KEY OPERATOR CODE DISPLAY.

CODE: *****

AR-M550/M620  SIMULATION  8 - 35

The values of the finisher counter, the scanner (read), counter, and the
SPF related counters are displayed.

The values of the paper feed related counters are displayed. 

The system configuration is displayed. (The model names of the
installed devices and options are displayed.)

(Model code list)

22-8

Adjustment/Setup/Operation data output/Check 
(Display/Print)

Used to check the number of use of the finisher, the 
SPF, and the scan (reading) unit.

Optical (Image scanning)

Finisher

Counter

SPF

Document feed quantity

SCAN

Number of scans

STAPLER

Number of stapling

PUNCH

Number of punching

STAMP

Number of SPF finish stamps

SADDLE STAPLER

Number of saddle staples

INSERTER

Number of inserter operations

22-9

Adjustment/Setup/Operation data output/Check 
(Display/Print)

Used to check the number of use (print quantity) of 
each paper feed section.

Paper feed, ADU

Counter

TRAY1

Tray 1 use quantity 

TRAY2

Tray 2 use quantity

TRAY3

Tray 3 use quantity

TRAY4

Tray 4 use quantity

BPT

Manual feed tray use quantity

ADU

Duplex paper feed quantity

LCC

Side LCC use quantity

22-10

Adjustment/Setup/Operation data output/Check 
(Display/Print)

Used to check the system configuration (option, 
internal hardware). 

Specifications

Options

SIMULATION 22-8

ORG./STAPLE COUNTER DATA DISPLAY.

SPF: ********

SCAN: ********

STAPLER: ********      PUNCH: ********

STAMP: ********        SADDLE STAPLER: ********

INSERTER: ********     INSERTER OFF LINE: ********

SIMULATION 22-9

PAPER FEED COUNTER DATA DISPLAY.

TRAY1: ********   TRAY2:********

TRAY3: ********   TRAY4:********

BPT: ********    ADU: ********

LCC: ********

MACHINE
FINISHER

NONE/ (Model code)

LCC

NONE/ (Model code)

INSERTER

NONE/ (Model code)

PUNCH

NONE/ (Model code)

SYSTEM MEMORY

Memory capacity (MB)

HDD

Hard disk capacity (MB)

NIC

NONE/ NIC

NSCN

NONE/ (Network scanner)

PS3

NONE/ (PS 3 expansion kit)

FAX

NONE/ (Model code)

FAX MEMORY

FAX expansion memory capacity (MB)

STAMP

Finish stamp NONE/ (Model code)

PCU TYPE

PCU PWB type 
(JPN: Japan,  EX: EX Japan)

Item

Display

Content

MACHINE

AR-555S/
M550U

Copier model (55-sheet model)

AR-625S/
M620U

Copier model (62-sheet model)

AR-705S/
M700U

Copier model (70-sheet model)

AR-555M/
M550N

Network print standard provision model 
(55-sheet model)

AR-625M/
M620N

Network print standard provision model 
(62-sheet model)

AR-705M/
M700N

Network print standard provision model 
(70-sheet model)

INSERTER

-----

Inserter not installed

AR-CF2

Inserter installed

FINISHER

-----

After-process unit not installed

AR-F15

Finisher installed

AR-F16

Saddle finisher installed

PUNCH

-----

Punch unit not installed

AR-PN4A

Punch unit installed (2-hole)

AR-PN4B

Punch unit installed (2-hole/3-hole auto 
select)

AR-PN4C

Punch unit installed (4-hole)

AR-PN4D

Punch unit installed (4-hole, wide)

LCC

-----

Side LCC not installed

AR-LC6

Side LCC installed

MEMORY

0MB

Expansion memory not installed

***MB

Expansion memory ***MB

HD

0MB

Hard disk not installed

****MB

Hard disk installed ()

NIC

-----

Network card not installed

NIC

Network card installed

PS 
EXPANSION 
KIT

-----

PS expansion kit not installed

AR-PK5

PS expansion kit installed

FAX

-----

FAX expansion kit not installed

AR-FX8

FAX expansion installed

NETWORKS
CANNER

-----

Network expansion kit not installed

AR-NS3

Network expansion kit installed

EXPANSION 
MEMORY

-----

FAX expansion memory not installed

AR-MM9

FAX expansion memory installed

FINISH 
STAMP

-----

Finish stamp unit not installed

AR-SU1

Finish stamp unit installed

DATA 
SECURITY 
KIT

-----

Data security kit not installed

AR-FR10/
FR11

Data security kit installed

AR-M550/M620  SIMULATION  8 - 36

The values of the FAX send counter and the FAX receive counter are 
displayed.

The history of paper jam and misfeed is displayed.

The misfeed history is displayed sequentially from the latest one. The
max. 20 items are recorded. (The oldest one is sequentially deleted.)
This data can be used to identify the trouble position.

The latest 20 data of document jam history are displayed. (Refer to the
jam code below.)

(Jam cause code)

(10 lines, 80 digits = 800 characters)

The rotating time and the print quantity of the process section (OPC
drum, DV unit (developer), toner motor (toner bottle)) are displayed.

The values of the counters related to the scan mode and the internet
FAX mode are displayed.

22-11

Adjustment/Setup/Operation data output/Check 
(Display/Print)

Used to check the use frequency (send/receive) of 
FAX. (Only when FAX is installed)

FAX

Data

FAX SEND

Number of FAX send 

FAX RECEIVE

Number of FAX receive

FAX OUTPUT

Number of FAX print

SEND IMAGES

Send quantity

SEND TIME

Send time

RECEIVE TIME

Receive time

22-12

Adjustment/Setup/Operation data output/Check 
(Display/Print)

Used to check the SPF misfeed positions and the 
number of misfeed at each position. (When the number 
of misfeed is considerably great, it can be judged as 
necessary for repair.)

DSPF

Trouble

Code

Description

NO_JAM_CAUSE

No jam. Also used to cancel a jam.

SPPD1_N

SPPD1 not-reached jam 

SPPD1_S

SPPD1 remaining jam 

SPPD2_N

SPPD2 not-reached jam 

SPPD2_S

SPPD2 remaining jam

SPPD3_N

SPPD3 not-reached jam

SPPD3_S

SPPD3 remaining jam

SPPD4_N

SPPD4 not-reached jam

SPPD4_S

SPPD4 remaining jam

SPOD_N

SPOD not-reached jam

SPOD_S

SPOD remaining jam

SPSD_SCN

Exposure start notification timer end

SIMULATION 22-10

SYSTEM INFORMATION.

MACHINE:*******

FINISHER: *******  PUNCH: ******

LCC: ******* INSERTER: ********

SYSTEM MEMORY: **MB  HDD: ***MB

NIC: *******    NSCN: ******  PS3: ******

FAX: *******  FAX MEMORY: **MB

STAMP: *******

PCU TYPE: *******

SIMULATION 22-11

FAX COUNTER DATA DISPLAY.

FAX SEND: ********   FAX RECEIVE : ********

FAX OUTPUT:********

SEND IMAGES: ********    SEND TIME: ********:**:**

RECEIVE TIME: ********:**:**

22-13

Adjustment/Setup/Operation data output/Check 
(Display/Print)

Used to check the operating time of the process 
section (OPC drum, DV unit, toner bottle).

Counter

DRUM

OPC drum

Count value (counts)

Rotating time (sec)

TONER

Toner motor

Count value (counts)
Rotating time (sec)

DEVE

DV unit

Count value (counts)

Rotating time (sec)

22-19

Adjustment/Setup/Operation data output/Check 
(Display/Print)

Used to check the values of the counters related to the 
scan mode and the internet FAX mode.

Scanner

Counter

NETWORK SCANNER 
ORIGINAL COUNTER

Document scan quantity (OC, SPF 
total quantity)

MAIL COUNTER

Number of times of mail send 

FTP COUNTER

Number of times of FTP send

INTERNET-FAX ORIGINAL 
COUNTER

Document scan quantity (OC, SPF, 
total quantity)

INTERNET-FAX SEND

Number of times of internet FAX send

INTERNET-FAX RECEIVE

Number of times of internet FAX 
receive

INTERNET-FAX OUTPUT

Internet FAX print quantity

SCAN TO HDD

Scan to HDD record quantity

INTERNET-FAX SEND 
IMAGES

IFAX send quantity counter

MAIL SEND IMAGES

MAIL send quantity counter

FTP SEND IMAGES

FTP send quantity counter

SIMULATION 22-12

SPF JAM HISTORY.

*******,*******,*******,*******,*******,*******,*******,*******,*******,*******

*******,*******,*******,*******,*******,*******,*******,*******,*******,*******

SIMULATION 22-13

PROCESS CARTRIDGE DATA DISPLAY.

DRUM: ********(counts)   **********(sec.)

TONER: ********(counts)  **********(sec.)

DEVE: *********(counts)  **********(sec.)