Sharp AR-M351N / AR-M451N (serv.man10) User Manual / Operation Manual ▷ View online
CAUTIONS
0-4
Laser Information
Wave length
785 nm
+10 nm
-15 nm
-15 nm
Pulse times
North America:
35 cpm model: (4.1 µs ± 4.1 ns)/7 mm
45 cpm model: (5.7 µs ± 5.7 ns)/7 mm
45 cpm model: (5.7 µs ± 5.7 ns)/7 mm
Europe:
35 cpm model: (3.8 µs ± 3.8 ns)/7 mm
45 cpm model: (4.4 µs ± 4.4 ns)/7 mm
45 cpm model: (4.4 µs ± 4.4 ns)/7 mm
Output power
0.2 mW - 0.4 mW
At the production line, the output power of the scanner unit is adjusted to 0.4 MILLIWATT PLUS 8 % and is maintained
constant by the operation of the Automatic Power Control (APC).
constant by the operation of the Automatic Power Control (APC).
Caution
Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous
radiation exposure.
Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous
radiation exposure.
For North America:
SAFETY PRECAUTIONS
This Digital Equipment is rated Class 1 and complies with 21 CFR 1040.10 and 1040.11 of the CDRH standards. This
means that the equipment does not produce hazardous laser radiation. For your safety, observe the precautions below.
● Do not remove the cabinet, operation panel or any other covers.
means that the equipment does not produce hazardous laser radiation. For your safety, observe the precautions below.
● Do not remove the cabinet, operation panel or any other covers.
● The equipment's exterior covers contain several safety interlock switches. Do not bypass any safety interlock by
inserting wedges or other items into switch slots.
For Europe:
CLASS 1 LASER PRODUCT
LASER KLASSE 1
LUOKAN 1 LASERLAITE
KLASS 1 LASERAPPARAT
CAUTION
INVISIBLE LASER RADIATION
WHEN OPEN INTERLOCKS
DEFEATED. AVOID EXPOSURE
TO BEAM.
WHEN OPEN INTERLOCKS
DEFEATED. AVOID EXPOSURE
TO BEAM.
VORSICHT
UNSICHTBARE
LASERSTRAHLUNG WENN
ABDECKUNG GEÖFFNET UND
SICHERHEITSVERRIEGELUNG
ÜBERBRÜCKT. NICHT DEM
STRAHL AUSSETZEN.
LASERSTRAHLUNG WENN
ABDECKUNG GEÖFFNET UND
SICHERHEITSVERRIEGELUNG
ÜBERBRÜCKT. NICHT DEM
STRAHL AUSSETZEN.
ADVARSEL
USYNLIG LASERSTRÅLNING
VED ÅBNING, NÅR
SIKKERHEDSBRYDERE ER
UDE AF FUNKTION. UNDGÅ
UDSAETTELSE FOR
STRÅLNING.
VED ÅBNING, NÅR
SIKKERHEDSBRYDERE ER
UDE AF FUNKTION. UNDGÅ
UDSAETTELSE FOR
STRÅLNING.
VAROITUS!
LAITTEEN KÄYTTÄMINEN
MUULLA KUIN TÄSSÄ
KÄYTTÖOHJEESSA
MAINITULLA TAVALLA SAATTAA
ALTISTAA KÄYTTÄJÄN
TURVALLISUUSLUOKAN 1
YLITTÄVÄLLE
NÄKYMÄTTÖMÄLLE
LASERSÄTEILYLLE.
MUULLA KUIN TÄSSÄ
KÄYTTÖOHJEESSA
MAINITULLA TAVALLA SAATTAA
ALTISTAA KÄYTTÄJÄN
TURVALLISUUSLUOKAN 1
YLITTÄVÄLLE
NÄKYMÄTTÖMÄLLE
LASERSÄTEILYLLE.
VARNING
OM APPARATEN ANVÄNDS PÅ
ANNAT SÄTT ÄN I DENNA
BRUKSANVISNING
SPECIFICERATS, KAN
ANVÄNDAREN UTSÄTTAS FÖR
OSYNLIG LASERSTRÅLNING,
SOM ÖVERSKRIDER GRÄNSEN
FÖR LASERKLASS 1.
ANNAT SÄTT ÄN I DENNA
BRUKSANVISNING
SPECIFICERATS, KAN
ANVÄNDAREN UTSÄTTAS FÖR
OSYNLIG LASERSTRÅLNING,
SOM ÖVERSKRIDER GRÄNSEN
FÖR LASERKLASS 1.
CLASS 1
LASER PRODUCT
LASER KLASSE 1
CAUTION
VORSICHT
ADVARSEL
ADVERSEL
VARNING
VARO!
VORSICHT
ADVARSEL
ADVERSEL
VARNING
VARO!
INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED.
AVOID EXPOSURE TO BEAM.
AVOID EXPOSURE TO BEAM.
Laserstrahl
UNSICHTBARE LASERSTRAHLUNG WENN ABDECKUNG GEÖFFNET UND
SICHERHEITSVERRIEGELUNG ÜBERERÜCKT. NICHT DEM STRAHL AUSSETZEN.
SICHERHEITSVERRIEGELUNG ÜBERERÜCKT. NICHT DEM STRAHL AUSSETZEN.
USYNLIG LASERSTRÅLING VED ÅBNING, NÅR SIKKERHEDSAFBRYDERE ER
UDE AF FUNKTION. UNDGÅ UDSAETTELSE FOR STRÅLNING.
UDE AF FUNKTION. UNDGÅ UDSAETTELSE FOR STRÅLNING.
USYNLIG LASERSTRÅLING NÅR DEKSEL ÅPNES OG SIKKERHEDSLÅS BRYTES.
UNNGÅ EKSPONERING FOR STRÅLEN.
UNNGÅ EKSPONERING FOR STRÅLEN.
OSYNLIG LASERSTRÅLNING NÄR DENNA DEL ÄR ÖPPNAD OCH SPÄRRAR ÄR
URKOPPLADE. STRÅLEN ÄR FARLIG. BETRAKTA EJ STRÅLEN.
URKOPPLADE. STRÅLEN ÄR FARLIG. BETRAKTA EJ STRÅLEN.
AVATTAESSA JA SUOJALUKITUS OHITETTAESSA OLET ALTTIINA NÄKYMÄTÖNTÄ
LASERSÄTEILYLLE. ÄLÄ KATSO SÄTEESEEN.
LASERSÄTEILYLLE. ÄLÄ KATSO SÄTEESEEN.
Copy_EX.book 4 ページ 2004年9月28日 火曜日 午後9時54分
0-5
CONTENTS
Page
PRODUCT CONFIGURATIONS.................................. 0-1
OPERATION MANUALS.............................................. 0-1
INSTALLATION REQUIREMENTS.............................. 0-2
CAUTIONS................................................................... 0-3
OPERATION MANUALS.............................................. 0-1
INSTALLATION REQUIREMENTS.............................. 0-2
CAUTIONS................................................................... 0-3
● Laser Information ................................................. 0-4
CONTENTS ................................................................. 0-5
CHAPTER 1
BEFORE USING THE PRODUCT
BEFORE USING THE PRODUCT
INTRODUCTION.......................................................... 1-2
MAIN FEATURES ........................................................ 1-3
PART NAMES AND FUNCTIONS ............................... 1-9
MAIN FEATURES ........................................................ 1-3
PART NAMES AND FUNCTIONS ............................... 1-9
● Exterior................................................................. 1-9
● Interior .................................................................. 1-10
● Part names and functions of peripheral devices .. 1-11
● Operation panel.................................................... 1-13
● Touch panel ......................................................... 1-14
TURNING THE POWER ON AND OFF....................... 1-17
AUDITING MODE ........................................................ 1-18
AUDITING MODE ........................................................ 1-18
● Using the machine when the auditing mode is
enabled ................................................................ 1-18
CHAPTER 2
MANAGING THE MACHINE
MANAGING THE MACHINE
LOADING PAPER........................................................ 2-2
● Loading paper in paper tray 1 .............................. 2-2
● Changing the paper size in paper tray 1 .............. 2-2
● Specifications of paper trays ................................ 2-3
● Setting the paper type and paper size ................. 2-5
● Setting the paper size when a special size is
loaded .................................................................. 2-6
● Programming and editing paper types ................. 2-7
● Loading paper in the multi purpose drawer.......... 2-8
● Specifications (multi purpose drawer) .................. 2-10
● Loading paper in the stand/3 x 500 sheet paper
drawer .................................................................. 2-10
● Specifications (stand/3 x 500 sheet paper
drawer) ................................................................. 2-10
● Loading paper in the stand/MPD & 2000 sheet
paper drawer ........................................................ 2-11
● Specifications (stand/MPD & 2000 sheet paper
drawer) ................................................................. 2-11
CUSTOM SETTINGS................................................... 2-12
● General procedure for custom settings ................ 2-12
● About the settings ................................................ 2-14
REPLACING THE TONER CARTRIDGE .................... 2-15
STORAGE OF SUPPLIES ........................................... 2-16
MISFEED REMOVAL................................................... 2-17
STORAGE OF SUPPLIES ........................................... 2-16
MISFEED REMOVAL................................................... 2-17
● Misfeed removal guidance ................................... 2-17
● Misfeed in the transport area, fusing area, and
exit area ............................................................... 2-18
● Misfeed in the duplex module .............................. 2-19
● Misfeed in the paper feed area ............................ 2-20
REMOVING AN ORIGINAL MISFEED ........................ 2-22
● Removing a misfed original from the automatic
document feeder .................................................. 2-22
TROUBLESHOOTING ................................................. 2-23
CHAPTER 3
PERIPHERAL DEVICES
PERIPHERAL DEVICES
DUPLEX MODULE.......................................................3-2
● Part names ...........................................................3-2
● Specifications .......................................................3-2
● Loading paper in the bypass tray .........................3-3
● Troubleshooting (concerning the duplex module) ..3-4
MAIL-BIN STACKER ....................................................3-5
● Part names ...........................................................3-5
● Specifications .......................................................3-5
● Misfeed in the mail-bin stacker .............................3-6
FINISHER.....................................................................3-7
● Part names ...........................................................3-7
● Specifications .......................................................3-7
● Finisher functions .................................................3-8
● Using the finisher functions ..................................3-9
● Staple cartridge replacement................................3-10
● Misfeed in the finisher...........................................3-12
● Troubleshooting finisher problems .......................3-13
SADDLE STITCH FINISHER .......................................3-14
● Part names ...........................................................3-14
● Specifications .......................................................3-14
● Saddle stitch finisher functions .............................3-15
● Using the saddle stitch finisher.............................3-18
● Staple cartridge replacement and staple jam
removal.................................................................3-19
● Misfeed in the saddle stitch finisher......................3-22
● Troubleshooting (concerning the saddle stitch
finisher).................................................................3-24
CHAPTER 4
MAKING COPIES
MAKING COPIES
AUTOMATIC DOCUMENT FEEDER ...........................4-2
● Acceptable originals .............................................4-2
PLACING ORIGINALS .................................................4-3
CHECKING THE SIZE OF A PLACED ORIGINAL ......4-5
CHECKING THE SIZE OF A PLACED ORIGINAL ......4-5
● Manually setting the scanning size.......................4-5
STORING, DELETING, AND USING ORIGINAL
SIZES ...........................................................................4-6
● Storing or deleting an original size .......................4-6
NORMAL COPYING.....................................................4-7
● Making copies with the automatic document
feeder ...................................................................4-7
● Automatic two-sided copying using the automatic
document feeder...................................................4-10
● Copying from the document glass ........................4-11
● Automatic two-sided copying from the document
glass .....................................................................4-13
ADJUSTING THE EXPOSURE ....................................4-14
REDUCTION/ENLARGEMENT/ZOOM ........................4-15
REDUCTION/ENLARGEMENT/ZOOM ........................4-15
● Automatic selection (auto image) .........................4-15
● Manual selection (preset copy ratios/zoom) .........4-16
● XY ZOOM .............................................................4-18
SPECIAL PAPERS.......................................................4-20
Copy_EX.book 5 ページ 2004年9月28日 火曜日 午後9時54分
CONTENTS
0-6
CHAPTER 5
CONVENIENT COPY FUNCTIONS
CONVENIENT COPY FUNCTIONS
SPECIAL MODES ........................................................5-2
● General procedure for using special functions .....5-2
● Margin shift...........................................................5-3
● Erase ....................................................................5-4
● Dual page copy.....................................................5-5
● Pamphlet copy......................................................5-6
● Job build ...............................................................5-8
● Tandem copy........................................................5-9
● Covers/inserts.......................................................5-11
● Transparency film with insert sheets ....................5-22
● Multi shot ..............................................................5-23
● Book copy.............................................................5-25
● Card shot ................................................................. 5-26
● Mirror image .........................................................5-28
● B/W reverse..........................................................5-28
● Print menu ............................................................5-29
STORING, USING AND DELETING JOB
PROGRAMS ................................................................5-41
● Storing a job program...........................................5-41
● Calling up a job program ......................................5-42
● Deleting a stored job program ..............................5-42
INTERRUPTING A COPY RUN ...................................5-43
CHAPTER 6
MACHINE MAINTENANCE (FOR
COPYING)
MACHINE MAINTENANCE (FOR
COPYING)
USER MAINTENANCE ................................................6-2
● Cleaning the document glass and the automatic
document feeder...................................................6-2
● Cleaning the main charger of the
photoconductive drum ..........................................6-2
TROUBLESHOOTING .................................................6-3
CHAPTER 7
DOCUMENT FILING FUNCTION
DOCUMENT FILING FUNCTION
OVERVIEW ..................................................................7-2
● Document filing function .......................................7-2
TO USE THE DOCUMENT FILING FUNCTION ..........7-4
● A look at the operation panel................................7-4
● Saving files ...........................................................7-4
● Main screen of document filing.............................7-5
● Document filing icons ...........................................7-5
SAVING A DOCUMENT IMAGE FILE..........................7-6
● Quick File..............................................................7-6
● Filing.....................................................................7-7
● Print jobs...............................................................7-9
● Scan Save ............................................................7-10
CALLING UP AND USING A FILE ...............................7-13
● Searching for and calling up a saved file.............. 7-13
● Calling up and using a saved file..........................7-15
CUSTOM SETTINGS ...................................................7-21
● Creating, editing, and deleting user names and
folders...................................................................7-21
ENTERING CHARACTERS .........................................7-26
TROUBLESHOOTING .................................................7-28
TROUBLESHOOTING .................................................7-28
CHAPTER 8
SPECIFICATIONS
SPECIFICATIONS
SPECIFICATIONS ....................................................... 8-2
LIST OF COMBINATION OF PERIPHERAL DEVICES .. 8-4
INDEX .......................................................................... 8-5
LIST OF COMBINATION OF PERIPHERAL DEVICES .. 8-4
INDEX .......................................................................... 8-5
Copy_EX.book 6 ページ 2004年9月28日 火曜日 午後9時54分
1-1
CHAPTER 1
BEFORE USING THE
PRODUCT
This chapter contains basic information that should be read before using
the product.
the product.
Page
INTRODUCTION .................................................................................... 1-2
MAIN FEATURES ................................................................................... 1-3
PART NAMES AND FUNCTIONS .......................................................... 1-9
●
Exterior............................................................................................ 1-9
●
Interior ............................................................................................. 1-10
●
Part names and functions of peripheral devices ............................. 1-11
●
Operation panel............................................................................... 1-13
●
Touch panel .................................................................................... 1-14
TURNING THE POWER ON AND OFF.................................................. 1-17
AUDITING MODE ................................................................................... 1-18
●
Using the machine when the auditing mode is enabled.................. 1-18
Copy_EX.book 1 ページ 2004年9月28日 火曜日 午後9時54分
Click on the first or last page to see other AR-M351N / AR-M451N (serv.man10) service manuals if exist.