DOWNLOAD Sharp AR-M316 (serv.man11) Service Manual ↓ Size: 6.52 MB | Pages: 127 in PDF or view online for FREE

Model
AR-M316 (serv.man11)
Pages
127
Size
6.52 MB
Type
PDF
Document
Service Manual
Brand
Device
Copying Equipment / Circuit Diagram.
File
ar-m316-sm11.pdf
Date

Sharp AR-M316 (serv.man11) Service Manual ▷ View online

Memo
LEAD-FREE SOLDER
The PWB’s of this model employs lead-free solder. The “LF” marks indicated on the PWB’s and the Service Manual mean “Lead-Free” solder. 
The alphabet following the LF mark shows the kind of lead-free solder.
(1) NOTE FOR THE USE OF LEAD-FREE SOLDER THREAD
When repairing a lead-free solder PWB, use lead-free solder thread.
Never use conventional lead solder thread, which may cause a breakdown or an accident.
Since the melting point of lead-free solder thread is about 40°C higher than that of conventional lead solder thread, the use of the exclusive-use
soldering iron is recommendable.
(2) NOTE FOR SOLDERING WORK
Since the melting point of lead-free solder is about 220°C, which is about 40°C higher than that of conventional lead solder, and its soldering capacity is
inferior to conventional one, it is apt to keep the soldering iron in contact with the PWB for longer time. This may cause land separation or may exceed
the heat-resistive temperature of components. Use enough care to separate the soldering iron from the PWB when completion of soldering is
confirmed.
Since lead-free solder includes a greater quantity of tin, the iron tip may corrode easily. Turn ON/OFF the soldering iron power frequently.
If different-kind solder remains on the soldering iron tip, it is melted together with lead-free solder. To avoid this, clean the soldering iron tip after
completion of soldering work.
If the soldering iron tip is discolored black during soldering work, clean and file the tip with steel wool or a fine filer.
Example:
5mm
Lead-Free
Solder composition
code (Refer to the
table at the right.)
<Solder composition code of lead-free solder> 
Solder composition
Sn-Ag-Cu
Sn-Ag-Bi
Sn-Ag-Bi-Cu
Sn-Zn-Bi
Sn-In-Ag-Bi
Sn-Cu-Ni
Sn-Ag-Sb
Bi-Sn-Ag-P
Bi-Sn-Ag
a
b
z
i
n
s
p
Solder composition code
a
   !"#$%&'()
 *+&,-./0 12 3
 
456789:; < =>8
?@ <67A/BC'DEFGHEI9J*K=B>8
<LM <DKN OP QRS+TUVW= XY
 
LMJN ZZP Q?@ DKN OP QRS++[9\J]^YW _`a'bcJd'BK
JAefghGijklmn opqr\J*^Yb;st uv^`MW TUh>8
wxyJzpS+TUS{|}J~GWSY'€ ‚ƒ„‚  XSB…>8
S{'†1J‡…+ +ˆ‰';Š‹^Y45ŒS{ Ž>8
45`'S{J>‘^`#’“^”•T–GKS{ Ž>8
5mm
a
b
z
i
n
s
p
a
(Danish)
ADVARSEL !
Lithiumbatteri – Eksplosionsfare ved fejlagtig håndtering.
Udskiftning må kun ske med batteri
af samme fabrikat og type.
Levér det brugte batteri tilbage til leverandoren.
(English)
Caution !
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type
recommended by the manufacturer.
Dispose of used batteries according to manufacturer’s instructions.
(Finnish)
VAROITUS
Paristo voi räjähtää, jos se on virheellisesti asennettu.
Vaihda paristo ainoastaan laitevalmistajan suosittelemaan
tyyppiin. Hävitä käytetty paristo valmistajan ohjeiden
mukaisesti.
(French)
ATTENTION
Il y a danger d’explosion s’ il y a remplacement incorrect
de la batterie. Remplacer uniquement avec une batterie du
même type ou d’un type équivalent recommandé par 
le constructeur.
Mettre au rebut les batteries usagées conformément aux
instructions du fabricant.
(Swedish)
VARNING
Explosionsfara vid felaktigt batteribyte.
Använd samma batterityp eller en ekvivalent
typ som rekommenderas av apparattillverkaren.
Kassera använt batteri enligt fabrikantens
instruktion.
(German)
Achtung
Explosionsgefahr bei Verwendung inkorrekter Batterien.
Als Ersatzbatterien dürfen nur Batterien vom gleichen Typ oder
vom Hersteller empfohlene Batterien verwendet werden.
Entsorgung der gebrauchten Batterien nur nach den vom
Hersteller angegebenen Anweisungen.
CAUTION FOR BATTERY REPLACEMENT
CAUTION FOR BATTERY DISPOSAL
(For USA, CANADA)
"BATTERY DISPOSAL"
THIS PRODUCT CONTAINS A LITHIUM PRIMARY 
(MANGANESS DIOXIDE) MEMORY BACK-UP BATTERY 
THAT MUST BE DISPOSED OF PROPERLY. REMOVE THE 
BATTERY FROM THE PRODUCT AND CONTACT YOUR 
LOCAL ENVIRONMENTAL AGENCIES FOR INFORMATION 
ON RECYCLING AND DISPOSAL OPTIONS.
"TRAITEMENT DES PILES USAGÉES"
CE PRODUIT CONTIENT UNE PILE DE SAUVEGARDE DE 
MÉMOIRE LITHIUM PRIMAIRE (DIOXYDE DE MANGANÈSE) 
QUI DOIT ÊTRE TRAITÉE CORRECTEMENT. ENLEVEZ LA 
PILE DU PRODUIT ET PRENEZ CONTACT AVEC VOTRE 
AGENCE ENVIRONNEMENTALE LOCALE POUR DES 
INFORMATIONS SUR LES MÉTHODES DE RECYCLAGE ET 
DE TRAITEMENT. 
All rights reserved.
Printed in Japan.
No part of this publication may be reproduced,
stored in a retrieval system, or transmitted,
in any form or by any means,
electronic; mechanical; photocopying; recording or otherwise
without prior written permission of the publisher.
Trademark acknowledgements
Microsoft
®
, Windows
®
, Windows
®
 98, Windows
®
 Me, Windows NT
®
 4.0, 
Windows
®
 2000, Windows
®
 XP, Windows
®
 Vista, Windows
®
 Server 2003 and 
Internet Explorer
®
 are registered trademarks or trademarks of 
Microsoft Corporation in the U.S.A. and other countries. 
PostScript is a registered trademark of Adobe Systems Incorporated.
Macintosh, Mac OS, AppleTalk, EtherTalk, LaserWriter, and Safari are registered 
trademarks or trademarks of Apple Computer, Inc.
IBM, PC/AT, and PowerPC are trademarks of International Business Machines 
Corporation.
Acrobat
®
 Reader Copyright
®
 1987- 2002 Adobe Systems Incorporated. All rights 
reserved. Adobe, the Adobe logo, Acrobat, and the Acrobat logo are trademarks of 
Adobe Systems Incorporated.
Sharpdesk is a trademark of Sharp Corporation.
PCL is a registered trademark of the Hewlett-Packard Company.
All other trademarks and copyrights are the property of their respective owners.
SHARP CORPORATION
Digital Document System Group
CS Promotion Center
Yamatokoriyama, Nara 639-1186, Japan
2007 July Printed in Japan
Page of 127
Display

Sharp AR-M316 (serv.man11) Service Manual ▷ Download