Sharp AR-M201 (serv.man10) User Manual / Operation Manual ▷ View online
PREPARATIONS
11
1
[COPY RATIO] key
Press to select an enlargement or
reduction ratio.
To select a preset ratio setting, press the
[COPY RATIO] key and select the
desired preset ratio. To select a ratio
that is not preset, press the [COPY
RATIO] key, select the preset ratio that
is closest to the desired ratio, and then
press the [
Press to select an enlargement or
reduction ratio.
To select a preset ratio setting, press the
[COPY RATIO] key and select the
desired preset ratio. To select a ratio
that is not preset, press the [COPY
RATIO] key, select the preset ratio that
is closest to the desired ratio, and then
press the [
] key (
) or
[
] key
(
) to increase or decrease the ratio in
increments of 1%.
[CLEAR ALL] key (
[CLEAR ALL] key (
)
This returns all functions to the default
settings. When pressed in a setting
menu, this returns the settings and
display to the initial state.
[START] key (
settings. When pressed in a setting
menu, this returns the settings and
display to the initial state.
[START] key (
) / Ready indicator
The ready indicator lights up when
copying or scanning is possible.
To begin copying, press the [START]
key (
copying or scanning is possible.
To begin copying, press the [START]
key (
).
The [START] key (
) is also pressed
to return to normal operation from auto
power shut-off mode.
power shut-off mode.
Shows the current copy ratio.
Shows the selected paper size.
Shows the number of copies that has
been entered with the numeric keys.
been entered with the numeric keys.
A checkmark "
" appears when the
exposure has been changed, or when
two-sided copying, sort, 2 IN 1, or
margin shift is selected.
two-sided copying, sort, 2 IN 1, or
margin shift is selected.
15
15
15
17
17
16
16
16
17
18
19
20
21
READY TO COPY.
100% A4 0
100% A4 0
Display
16
18
19
20
21
3
4
5
17
!AR-M201.book 11 ページ 2008年2月12日 火曜日 午後7時41分
12
CONNECTING THE POWER CORD
1
Ensure that the power switch
of the unit is in the OFF
position. Insert the attached
power cord into the power cord
socket at the rear of the unit.
of the unit is in the OFF
position. Insert the attached
power cord into the power cord
socket at the rear of the unit.
2
Plug the other end of the power cord into the nearest outlet.
POWER ON AND OFF
The power switch is located on the left side of the machine.
Power on
Turn the power switch to the "ON" position.
The ready indicator will light up and other indicators
which show the initial settings of the display will also
light up to indicate the ready condition. For the initial
settings, see "Initial settings" (below).
which show the initial settings of the display will also
light up to indicate the ready condition. For the initial
settings, see "Initial settings" (below).
You can select copy settings and press the [START] key (
) after the power
switch is turned on. Copying will start automatically.
Language setting
The first time the power is turned on after shipment from the factory, a message will
appear in English in the display prompting you to select the language. Select the
language with the [
appear in English in the display prompting you to select the language. Select the
language with the [
] key (
) or [
] key (
) and then press the [ENTER] key.
The language can also be changed in the user programs (p.57).
Initial settings
The machine reverts to the initial settings when it is first turned on, when the [CLEAR
ALL] key (
ALL] key (
) is pressed,
or when no keys are pressed for the preset "AUTO
CLEAR" time following the end of a copy job.
When the machine reverts to the initial
settings, all settings and functions selected to that point are cancelled. The "AUTO
CLEAR" can be changed in the user programs. (p.54)
CLEAR" can be changed in the user programs. (p.54)
Scanning unit (scan head)
When the machine is able to copy or scan (the ready indicator is on), the scanning unit is lit.
If you use the unit in a country other than the country where the unit
was purchased, you will need to make sure that your local power
supply is compatible with your model. If you plug the unit into an
incompatible power supply, irreparable damage to the unit will result.
was purchased, you will need to make sure that your local power
supply is compatible with your model. If you plug the unit into an
incompatible power supply, irreparable damage to the unit will result.
• Only insert the power cord into a properly grounded wall socket.
• Do not use extension cords or power strips.
• Do not use extension cords or power strips.
Copy ratio: 100%, Exposure: Automatic
Copy quantity: 0, All special copier modes: Off
Copy quantity: 0, All special copier modes: Off
Warning
Caution
READY TO COPY.
100% A4 0
100% A4 0
When in the copy mode
The main screen of copy
mode appears.
mode appears.
!001-Introduction.fm 12 ページ 2008年3月6日 木曜日 午前10時32分
PREPARATIONS
13
1
Power off
Make sure that the machine is not in operation and then turn the power
switch to the "OFF" position.
switch to the "OFF" position.
If the power switch is turned off while the machine is
in operation, a misfeed may occur and the job that
was in progress will be cancelled.
In cases where the machine will not be used for a
long time, turn off the power switch and remove the
power cord from the outlet.
in operation, a misfeed may occur and the job that
was in progress will be cancelled.
In cases where the machine will not be used for a
long time, turn off the power switch and remove the
power cord from the outlet.
Check the following to make sure the machine is not in operation:
• The ready indicator is lit. (Initial state)
• The power save indicator is lit. (preheat mode or auto power shut-off mode)
• The ready indicator is lit. (Initial state)
• The power save indicator is lit. (preheat mode or auto power shut-off mode)
Power save modes
The machine has two power save modes to reduce overall power consumption and
thereby reduce the cost of operation. In addition, these modes conserve natural
resources and help reduce environmental pollution. The two power save modes are
preheat mode and auto power shut-off mode.
thereby reduce the cost of operation. In addition, these modes conserve natural
resources and help reduce environmental pollution. The two power save modes are
preheat mode and auto power shut-off mode.
Preheat mode
This function automatically switches the machine to a low power consumption state if
the set duration of time elapses without the machine being used when the power is
on. In this mode, the power save indicator lights up. Normal operation automatically
resumes when a key on the operation panel is pressed, an original is placed, a print
job is received.
the set duration of time elapses without the machine being used when the power is
on. In this mode, the power save indicator lights up. Normal operation automatically
resumes when a key on the operation panel is pressed, an original is placed, a print
job is received.
Auto power shut-off mode
This function automatically switches the machine to a state that consumes even less
power than preheat mode if the set duration of time elapses without the machine being
used when the power is on. The power save indicator lights up, the display shows a
message indicating that the machine is in auto power shut-off mode. To resume normal
operation, press the [START] key (
power than preheat mode if the set duration of time elapses without the machine being
used when the power is on. The power save indicator lights up, the display shows a
message indicating that the machine is in auto power shut-off mode. To resume normal
operation, press the [START] key (
). Normal operation also resumes automatically
when a print job is received or scanning is begun from a computer. While in auto power
shut-off mode, no keys (except the [START] key (
shut-off mode, no keys (except the [START] key (
)) can be used.
Check original cover/RSPF open function
When enabled, this function may help prevent wasteful use of toner that occurs when
the original cover/RSPF cover is not completely closed.
If the start (
the original cover/RSPF cover is not completely closed.
If the start (
) key is pressed when the original cover/RSPF cover is not completely
closed, "CHECK ORIGINAL" will appear in the display and copying may not take
place. If copying does not take place, copying can be performed by pressing the start
(
place. If copying does not take place, copying can be performed by pressing the start
(
) key again, however, the scan size set in "CHANGING A TRAY'S PAPER SIZE
SETTING" (p.19) or "VALID COPY WIDTH" (program number 25) (p.57) will be used.
If the original cover/RSPF cover is completely closed after "CHECK ORIGINAL"
appears, copying will take place at the normal size.
If the original cover/RSPF cover is completely closed after "CHECK ORIGINAL"
appears, copying will take place at the normal size.
The preheat activation time and the auto power shut-off time can be
changed with "PREHEAT MODE" and "AUTO SHUT-OFF TIME" in the
user programs. It is suggested that you set times that are appropriate
for your usage of the machine. (p.54 and p.55)
changed with "PREHEAT MODE" and "AUTO SHUT-OFF TIME" in the
user programs. It is suggested that you set times that are appropriate
for your usage of the machine. (p.54 and p.55)
Note
!001-Introduction.fm 13 ページ 2008年3月5日 水曜日 午後6時1分
14
2
Chapter 2
The tray location indicator will blink when there is no paper in the selected paper
tray, or when the selected paper tray is not closed or is improperly closed.
tray, or when the selected paper tray is not closed or is improperly closed.
PAPER
For best results, use only SHARP recommended paper.
*
1
The number of sheets of paper that can be loaded varies depending on the weight of
the paper.
the paper.
*
2
Do not use non-standard envelopes or envelopes that have metal clasps, plastic
snappers, strings, windows, linings, self-adhesive strips, patches or synthetic materials.
Do not use envelopes that are filled with air or envelopes that have labels or stamps
attached. These will damage the machine.
snappers, strings, windows, linings, self-adhesive strips, patches or synthetic materials.
Do not use envelopes that are filled with air or envelopes that have labels or stamps
attached. These will damage the machine.
*
3
When using paper heavier than 104 g/m
2
(28 lbs.), use paper that is A4 (8-1/2" x 11") or
smaller.
Paper tray type
Paper type
Size
Weight
Capacity
Paper tray
Standard paper
Recycled paper
Recycled paper
A4 (210 mm x 297 mm)
A5 (148 mm x 210 mm)
B5 (182 mm x 257 mm)
5-1/2" x 8-1/2"
(Invoice)
8-1/2" x 11" (Letter)
8-1/2" x 13"
(Foolscap)
8-1/2" x 14" (Legal)
A5 (148 mm x 210 mm)
B5 (182 mm x 257 mm)
5-1/2" x 8-1/2"
(Invoice)
8-1/2" x 11" (Letter)
8-1/2" x 13"
(Foolscap)
8-1/2" x 14" (Legal)
56 g/m
2
to
80 g/m
2
(15 lbs. to 21 lbs.)
250 sheets *
1
(The paper
should not
exceed the
line on the
tray)
should not
exceed the
line on the
tray)
Bypass tray
Standard paper
Recycled paper
Recycled paper
89 mm x 140 mm to
216 mm x 356 mm
(3-1/2" x 5-1/2" to
8-1/2" x 14")
216 mm x 356 mm
(3-1/2" x 5-1/2" to
8-1/2" x 14")
56 g/m
2
to
80 g/m
2
(15 lbs. to 21 lbs.)
50 sheets *
1
Thick paper
56 g/m
2
to
128 g/m
2
(15 lbs. to
34.5 lbs.)*
34.5 lbs.)*
3
Load one
sheet at a
time in the
bypass tray.
sheet at a
time in the
bypass tray.
Transparency
film/Labels
film/Labels
Envelopes *
2
International DL
(110 mm x 220 mm)
International C5
(162 mm x 229 mm)
Monarch
(3-7/8" x 7-1/2")
Commercial 9
(3-7/8" x 8-7/8")
Commercial 10
(4-1/8" x 9-1/2")
(110 mm x 220 mm)
International C5
(162 mm x 229 mm)
Monarch
(3-7/8" x 7-1/2")
Commercial 9
(3-7/8" x 8-7/8")
Commercial 10
(4-1/8" x 9-1/2")
LOADING PAPER
!AR-M201.book 14 ページ 2008年2月12日 火曜日 午後7時41分
Click on the first or last page to see other AR-M201 (serv.man10) service manuals if exist.