DOWNLOAD Sharp AR-M160 (serv.man58) Service Manual ↓ Size: 167.36 KB | Pages: 3 in PDF or view online for FREE

Model
AR-M160 (serv.man58)
Pages
3 Few pages! See other manuals at the bottom of the first or last page.
Size
167.36 KB
Type
PDF
Document
Service Manual / Technical Bulletin
Brand
Device
Copying Equipment / Supply of service part for countermeasure against image distortion in the trailing edge of the back side.
File
ar-m160-sm58.pdf
Date

Sharp AR-M160 (serv.man58) Service Manual / Technical Bulletin ▷ View online

 
 
 
Sharp Electronics (UK) Ltd., Document Systems Support
 
 
 
 
If distortion has occurred in the trailing edge of the back side (see figure below), attach 
one or  
more Mylar sheets to the FU pressure lever F or R with reference to the table below. 
 
 Note: 
The above reference table for number of Mylar sheets was made up based  
on the test results in the production plant. 
However, use this table as a guide since the effect varies depending on the  
machine status or the used paper. 
When the effect is small, attach one more Mylar sheet, and check the effect. 
If the effect is too large (the line is distorted in the reverse direction of the  
initial pattern), remove the Mylar sheets on a sheet-by-sheet basis. 
 
 
 
 
Sharp Electronics (UK) Ltd., Document Systems Support
 
 
 
 
If distortion has occurred in the trailing edge of the back side (see figure below), attach 
one or  
more Mylar sheets to the FU pressure lever F or R with reference to the table below. 
 
 Note: 
The above reference table for number of Mylar sheets was made up based  
on the test results in the production plant. 
However, use this table as a guide since the effect varies depending on the  
machine status or the used paper. 
When the effect is small, attach one more Mylar sheet, and check the effect. 
If the effect is too large (the line is distorted in the reverse direction of the  
initial pattern), remove the Mylar sheets on a sheet-by-sheet basis. 
 
 
 
 
Sharp Electronics (UK) Ltd., Document Systems Support
 
 
 
 
If distortion has occurred in the trailing edge of the back side (see figure below), attach 
one or  
more Mylar sheets to the FU pressure lever F or R with reference to the table below. 
 
 Note: 
The above reference table for number of Mylar sheets was made up based  
on the test results in the production plant. 
However, use this table as a guide since the effect varies depending on the  
machine status or the used paper. 
When the effect is small, attach one more Mylar sheet, and check the effect. 
If the effect is too large (the line is distorted in the reverse direction of the  
initial pattern), remove the Mylar sheets on a sheet-by-sheet basis. 
 
 
 
 
Sharp Electronics (UK) Ltd., Document Systems Support
 
 
 
 
If distortion has occurred in the trailing edge of the back side (see figure below), attach 
one or  
more Mylar sheets to the FU pressure lever F or R with reference to the table below. 
 
 Note: 
The above reference table for number of Mylar sheets was made up based  
on the test results in the production plant. 
However, use this table as a guide since the effect varies depending on the  
machine status or the used paper. 
When the effect is small, attach one more Mylar sheet, and check the effect. 
If the effect is too large (the line is distorted in the reverse direction of the  
initial pattern), remove the Mylar sheets on a sheet-by-sheet basis. 
 
Display

Sharp AR-M160 (serv.man58) Service Manual / Technical Bulletin ▷ Download

  • DOWNLOAD Sharp AR-M160 (serv.man58) Service Manual ↓ Size: 167.36 KB | Pages: 3 in PDF or view online for FREE
  • Here you can View online or download the Service Manual / Technical Bulletin for the Sharp AR-M160 (serv.man58) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp AR-M160 (serv.man58) Copying Equipment. Information contained in Sharp AR-M160 (serv.man58) Service Manual / Technical Bulletin (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.