Sharp AR-M150 (serv.man6) User Manual / Operation Manual ▷ View online
91
9
250-SHEET PAPER FEED UNIT (AR-D16)
The paper feed unit provide the convenience of increased paper capacity for the unit
and a greater choice of paper size readily available for copying.
The procedures for loading paper in the
paper tray of paper feed unit, changing
the paper size, and selecting the paper
tray are same as for the paper tray in the
unit. See "LOADING THE PAPER TRAY"
(p.15) and "SELECTING THE TRAY"
(p.23).
and a greater choice of paper size readily available for copying.
The procedures for loading paper in the
paper tray of paper feed unit, changing
the paper size, and selecting the paper
tray are same as for the paper tray in the
unit. See "LOADING THE PAPER TRAY"
(p.15) and "SELECTING THE TRAY"
(p.23).
Misfeed removal
The copier will stop when a misfeed ocurs. The misfeed (
) indicator blinks or
blinks in the display.
1
Open the lower side cover (under the
bypass tray) and remove the misfed
paper. If
bypass tray) and remove the misfed
paper. If
blinks and the misfed
paper is not seen from the area of the
lower side cover, pull out the lower
paper tray and remove the misfed
paper. Then close the lower paper
tray.
lower side cover, pull out the lower
paper tray and remove the misfed
paper. Then close the lower paper
tray.
2
Close the lower side cover.
3
Close the side cover by pressing the round projections near
the side cover open button. The misfeed (
the side cover open button. The misfeed (
) indicator will go
out and the ready (
) indicator will light up.
Lower side cover
Tray
P
P
OPTIONAL EQUIPMENT
92
Using the AR-D16 with the printer function
To use the AR-D16 with the printer function, follow these steps to adjust the settings
in the printer driver.
in the printer driver.
1
Click the "start" button.
2
Click "Control Panel", select "Printer and Other Hardware", and
then click "Printer and Faxes".
then click "Printer and Faxes".
On Windows 95/98/Me/NT 4.0/2000, select "Setting" and click "Printers".
3
Click the "SHARP AR-M155" printer driver icon and from the
"File" menu select "Properties".
"File" menu select "Properties".
On Windows 95/98/Me, click the "SHARP AR-M155" printer driver icon,
select "Properties" from the "File" menu, and then click the "Setup" tab.
select "Properties" from the "File" menu, and then click the "Setup" tab.
4
Click the "Utility" tab.
5
Select "Two trays" for "Input tray
option", and click "OK".
option", and click "OK".
The printer driver closes. This completes the
settings needed to use the AR-D16.
settings needed to use the AR-D16.
Supply list
* Based on copying onto an A4-type paper at 6% toned area.
Interface cable
Please purchase the appropriate cable for your computer.
USB interface cable
USB cable that supports USB 2.0.
Parallel interface cable
IEEE 1284-shielded type bi-directional parallel cable.
The printer driver cannot be set for use with the AR-D16 when opened
from the application.
from the application.
The following option can not be used together (exclusive combinations) :
AR-M150 and RSPF (AR-RP8)
AR-M150 and RSPF (AR-RP8)
Supply
Part number
Usable life
TD cartridge
AR-152T
Approx. 8,000 sheets *
Note
Note
93
10
Chapter 10
10
SPECIFICATIONS
Model
AR-M150
AR-M155
Type
Digital Multifunctional System, Desktop
Photoconductive
type
type
OPC drum
Document glass
type
type
Fixed
Copy/printing
system
system
Dry, electrostatic transfer
Originals
Sheets, bound documents
Originals size
Max. A4 (8-1/2" x 14")
Copy size
Max. A4 (8-1/2" x 14")
Min. A6 (3-1/2" x 5-1/2")
Image loss: Max. 4 mm (5/32") (leading and trailing edges)
Min. A6 (3-1/2" x 5-1/2")
Image loss: Max. 4 mm (5/32") (leading and trailing edges)
Max. 4.5 mm (11/64") (along other edges in total)
Max. 6 mm (15/64") (trailing edge of the second
copy of two-sided copying.)
Max. 6 mm (15/64") (trailing edge of the second
copy of two-sided copying.)
Copying speed
(one-sided copying
at 100% copy ratio)
(one-sided copying
at 100% copy ratio)
15 copies/min. (A4)
Continuous copy
Max. 99 copies; subtractive counter
First-copy time*
1
Approx. 9.6 sec.
Warm-up time*
1
Approx. 0 sec.
Copy ratio
Document glass:
Variable: 25% to 400% in 1% increments (total 376 steps)
Fixed preset: 25%, 50%, 70%, 86%, 100%, 141%, 200%,
Variable: 25% to 400% in 1% increments (total 376 steps)
Fixed preset: 25%, 50%, 70%, 86%, 100%, 141%, 200%,
400%
(25%, 50%, 64%, 78%, 100%, 129%, 200%,
400%)
(25%, 50%, 64%, 78%, 100%, 129%, 200%,
400%)
Exposure system
Document glass: Moving optical source, slit exposure
(stationary platen) with automatic
exposure function
exposure function
SPF/RSPF:
Moving original
Paper feed
One automatic feeding paper tray (250 sheets each) +
bypass tray (50 sheets)
bypass tray (50 sheets)
APPENDIX
APPENDIX
94
*
1
The copy time in the case when the power is turned on and copying using the
document glass is started immediately after the power save indicator goes off (A4,
paper fed from paper tray).
The first-copy time may vary depending on machine operating conditions and
ambient conditions such as temperature.
document glass is started immediately after the power save indicator goes off (A4,
paper fed from paper tray).
The first-copy time may vary depending on machine operating conditions and
ambient conditions such as temperature.
*
2
Not including toner cartridges.
Fusing system
Heat rollers
Developer system
Magnetic brush development
Light source
Tri-color CCD light source (CCD: 3 components; R, G, and B)
Resolution
Scan: 600 x 300 dpi Output: 600 x 600 dpi(AUTO/TEXT mode)
Scan: 600 x 600 dpi Output: 600 x 600 dpi(PHOTO mode)
Scan: 600 x 600 dpi Output: 600 x 600 dpi(PHOTO mode)
Gradation
Scanning: 256 Printing: 2 value
Power supply
Local voltage ±10% (For this machine's power supply
requirement, see the name plate located on the back of the
machine.)
requirement, see the name plate located on the back of the
machine.)
Power consumption
Max. 1.0 kW
Overall dimensions
(with bypass tray
folded)
(with bypass tray
folded)
518 mm (W) x 503 mm (D) (20.4" (W) x 19.8" (D))
Weight*
2
Approx. 16.6 k
g (36.6 lbs.)
Approx. 16.8 k
g (37.1 lbs.)
Dimensions
518 mm (W) x 503 mm (D) x 296 mm (H)
(20.4" (W) x 19.8" (D) x 11.7" (H))
(20.4" (W) x 19.8" (D) x 11.7" (H))
Operating
conditions
conditions
Temperature: 10
°
C to 30
°
C (50
°
F to 86
°
F)
Humidity: 20% to 85%
Noise level
Sound Power Level Lw
A
(1B=10dB)
Copying: 6.0 [B]
Standby: 3.2 [B]
Sound Pressure Level Lp
Standby: 3.2 [B]
Sound Pressure Level Lp
A
(bystander positions)
Copying: 46 [dB(A)]
Standby: 17 [dB(A)]
Sound Pressure Level Lp
Standby: 17 [dB(A)]
Sound Pressure Level Lp
A
(operator position)
Copying: 48 [dB(A)]
Standby: 18 [dB(A)]
Noise emission measurement in accordance with ISO 7779.
Standby: 18 [dB(A)]
Noise emission measurement in accordance with ISO 7779.
Emission
concentration
(measured
according to RAL-
UZ62 : Edition Jan.
2002)
concentration
(measured
according to RAL-
UZ62 : Edition Jan.
2002)
Ozone: 0.02 m
g/m
3
or less
Dust:
0.075 m
g/m
3
or less
Styrene: 0.07 m
g/m
3
or less
Click on the first or last page to see other AR-M150 (serv.man6) service manuals if exist.