Sharp AR-F11 (serv.man7) Service Manual ▷ View online
6-48
CHAPTER 6 MECHANICAL CONSTRUCTION
6) Remove 4 screws [14], and take off the trans-
port motor [15] with the bracket.
2.
Sensors
1) Remove the front cover, and take off the feed
motor, main board and transport motor.
2) Remove 3 connectors [1] and release the
harness clamp [2]. Then remove 2 screws
[3], and take off the joint sensor [4] and joint
switch [5] with the bracket [6].
[3], and take off the joint sensor [4] and joint
switch [5] with the bracket [6].
3) Open the transport cover 1 [7], disconnect 1
connector for each sensor, and take off the
transport cover 1 open/close sensor 1 [8] and
separation sensor [9].
transport cover 1 open/close sensor 1 [8] and
separation sensor [9].
Figure 6-418
Figure 6-417
Figure 6-416
[14]
[14]
[15]
[1]
[2]
[4]
[1]
[3]
[3]
[6]
[5]
[7]
[9]
[8]
6-49
CHAPTER 6 MECHANICAL CONSTRUCTION
D.
Upper Inserter Unit
1.
Reverse sensor/Transport sensor/
Transport cover 2 open/close
detection sensor
Transport cover 2 open/close
detection sensor
1) Remove 2 screws [1], and take off the up-
per inserter unit [2].
2) Remove 2 screws [3], and take off the stay
[4].
4) Lift the tray, disconnect 1 connector [10],
and take off the tray open/close sensor [11].
Figure 6-420
Figure 6-421
Figure 6-419
[10]
[11]
[1]
[2]
[4]
[3]
6-50
CHAPTER 6 MECHANICAL CONSTRUCTION
E.
Tray Unit
1.
Paper width detection volume
1) Lift the tray, remove 2 screws [1], and take
off the tray lower guide [2].
Figure 6-424
Figure 6-423
3) Disconnect 1 connector [5], remove 1 screw
[6], and take off the reverse sensor [7] with
the bracket.
the bracket.
4) Disconnect 1 connector [8] for each sensor,
and take off the transport sensor [9] and
transport cover 2 open/close sensor [10].
transport cover 2 open/close sensor [10].
Figure 6-422
[5]
[6]
[7]
[8]
[10]
[9]
[1]
[1]
[2]
6-51
CHAPTER 6 MECHANICAL CONSTRUCTION
Figure 6-427
Figure 6-426
2) Remove 3 screws [3], and take off the tray
lower cover [4].
3) Remove 1 connector [5], and take off the
empty sensor [6].
4) Remove 2 screws [7], and take off the pa-
per width detection volume [8].
Figure 6-425
[3]
[3]
[4]
[5]
[6]
[8]
[7]
Click on the first or last page to see other AR-F11 (serv.man7) service manuals if exist.