Sharp AR-CF1 (serv.man7) Service Manual ▷ View online
6-20
CHAPTER 6 MECHANICAL CONSTRUCTION
7) Remove the tension springs (front [5], rear
[6]).
Figure 6-216
Figure 6-217
[5]
[6]
6-21
CHAPTER 6 MECHANICAL CONSTRUCTION
8) Remove the two C-rings [7], and remove
the sensor flag [8] and two bearings [9] at
the rear.
the rear.
Figure 6-218
9) Remove the two C-rings [10], and remove
the two gears [11] at the front.
Figure 6-219
[9]
[7]
[8]
[11]
[10]
6-22
CHAPTER 6 MECHANICAL CONSTRUCTION
10) Remove the two bearings [12].
11) Open the saddle delivery tray assembly [13].
12) Remove the two screws [14], and remove
12) Remove the two screws [14], and remove
the two alignment plates [15].
13) Slide the paper folding roller [16] to the front,
and pull it out in the delivery direction.
Figure 6-220
Figure 6-221
3.
Installing the Paper Folding Roller
1) Attach the gear [2] so that the grooved sec-
tion [1] on the gear is facing the grooved
section [1] on the paper folding roller to align
the phases.
section [1] on the paper folding roller to align
the phases.
Figure 6-222
[12]
[ 13]
[ 15]
[ 14]
[ 14]
[ 16]
[2]
[1]
6-23
CHAPTER 6 MECHANICAL CONSTRUCTION
4.
Removing the Stitcher Mount Unit
1) Remove the front inside cover (see II-A-3).
2) Remove the E-ring [1], and remove the roll
2) Remove the E-ring [1], and remove the roll
[2] and the shaft [3].
Figure 6-223
Figure 6-225
3) Pull out the stitcher mount unit [4] to the
front.
Figure 6-224
5.
Adjusting the Stitcher Position
1) Remove the front lower door (see II-A-1).
2) Remove the front inside cover (see II-A-3).
3) Open the front door assembly.
4) Pull out the stitcher mount unit to the front,
2) Remove the front inside cover (see II-A-3).
3) Open the front door assembly.
4) Pull out the stitcher mount unit to the front,
then pull out the stitcher towards you and
then pull the stitcher down.
then pull the stitcher down.
5) Remove the three screws [1], and remove
the stitcher mount unit cover [2].
[1]
[2]
[3]
[4]
[1]
[2]
Click on the first or last page to see other AR-CF1 (serv.man7) service manuals if exist.