Sharp AR-CF1 (serv.man7) Service Manual ▷ View online
6-12
CHAPTER 6 MECHANICAL CONSTRUCTION
Figure 6-129
Figure 6-130
4.
Removing the Stapler
1) Open the front cover, and move the stapler
assembly to the front.
2) Remove the screw [1], and slide out the sta-
pler assembly [2].
3) Disconnect the connector [4] of the stapler
assembly [3].
[2]
[1]
[4]
[3]
4) Remove the front cover (see I-A-4).
5) Remove the screw [4], and remove the guide
5) Remove the screw [4], and remove the guide
support plate assembly [5]. Then, remove
the buffer roller assembly [6].
the buffer roller assembly [6].
Figure 6-128
[6]
[5]
[4]
6-13
CHAPTER 6 MECHANICAL CONSTRUCTION
C.
PCBs
1.
Removing the Finisher Controller
PCB
PCB
1) Remove the rear cover.
2) Disconnect the 17 connectors [1].
3) Remove the four screws [2], and remove the
2) Disconnect the 17 connectors [1].
3) Remove the four screws [2], and remove the
finisher controller PCB [3].
Figure 6-132
[2]
[1]
[3]
[2]
[2]
4) Remove the two screws [6] from the stapler
cover [5], and remove the stapler.
Figure 6-131
[ 5 ]
[ 6 ]
6-14
CHAPTER 6 MECHANICAL CONSTRUCTION
II. SADDLE STITCH UNIT
A.
Externals and Controls
1.
Removing the Front Lower Door
Assembly
Assembly
1) Open the front lower door assembly [1].
2) Remove the screw [2] and remove the bush-
2) Remove the screw [2] and remove the bush-
ing [3], and then remove the front lower door
assembly.
assembly.
Figure 6-201
2.
Removing the Rear Lower Cover
1) Remove the four screws [1], and remove the
rear lower cover [2].
Figure 6-202
[1]
[3]
[2]
[1]
[2]
[1]
6-15
CHAPTER 6 MECHANICAL CONSTRUCTION
3.
Removing the Front Inside Cover
1) Open the front lower door assembly [1].
2) Remove the screw [2], and remove the fold-
2) Remove the screw [2], and remove the fold-
ing roller knob [3].
3) Remove the five screws [4], and remove the
front inside cover [5].
Figure 6-203
4.
Removing the Saddle Delivery
Tray Assembly
Tray Assembly
1) Lift up the open/close lever [2] of the saddle
delivery tray assembly [1], and open the
saddle delivery tray assembly.
saddle delivery tray assembly.
Figure 6-204
2) Remove the door shaft [3] in the direction
of the arrow, and slide out towards the front
of the saddle delivery tray assembly [4].
of the saddle delivery tray assembly [4].
Figure 6-205
[1]
[4]
[4]
[3]
[5]
[4]
[2]
[1]
[2]
[3]
[4]
Click on the first or last page to see other AR-CF1 (serv.man7) service manuals if exist.