DOWNLOAD Sharp AR-C260 (serv.man32) Service Manual ↓ Size: 6.42 MB | Pages: 127 in PDF or view online for FREE

Follow these steps to change the paper type setting
when the paper type has been changed in a paper tray.
For the paper types that can be used in each tray, see
page 2-9. To change the paper type setting for the
bypass tray, see page 2-12.

The custom setting
menu screen will
appear.

The paper tray selection
screen will appear.

Select the paper tray for which the setting
is to be made. (For the tray numbers, see
the tray specifications on page 2-9.)

If the desired tray is not
on the display, use 

 or

 key to scroll the

display until it appears.

The currently selected
paper type will be
highlighted. To change
the setting, touch the
desired type.

When a paper tray is set to "extra", this informs the
machine that an extra size is being used. It does not
inform the specific size. To enter the specific size of the
paper loaded, follow the steps below.
For example, if 8-1/2" x 11" size paper is loaded in the
tray (with the size slide set to "extra"), you can use this
procedure to set the paper size recognized by the
machine to 8-1/2" x 11" size. If you loaded an irregular
size of paper, you can enter the dimensions of the
paper.
To set the paper size when an extra size of paper is
loaded in the bypass tray, see page 2-12.

When the screen opens the X key will be
highlighted. Use the 

 and 

 touch keys to

enter the X dimension. Next touch the Y key to
highlight it and enter the dimensions for Y.
The permitted range for the X dimension is 139 to
432 mm (5-1/2 to 17 inches), and the permitted
range for the Y dimension is 182 to 297 mm (7-1/4
to 11-3/4 inches).
When both have been entered, touch the [OK] to
complete the operation.

Special paper such as transparency film,
envelopes, and postcards can only be used in the
bypass tray.

TOT L COUNT

TRAY SETTINGS

ADDRES
CONTRO

KEYBOARD 

SELECT

KEY 

CONTRA

TRAY 1

TRAY 2

PLAIN / 

TYPE / SIZE

PLAIN / 

PLAIN 

PRE-PRINTED

RECYCLED

LETTER HEAD

PRE-PUNCHED

COLOUR

CUSTOM SETTINGS

EXTRA SIZE

TRAY 3 TYPE/SIZE SETTING

A3

B4

A4

A4R

A5

EXTRA

B5

B5R

11X17

OK

2/3

8 X11R

1 

/

 2

7 X10 R

1 

/

 4

1 

/

 2

8 X14

1 

/

 2

8 X13

1 

/

 2

8 X11

1 

/

 2

5 X8 

1 

/

 2

1 

/

 2

X

Y

139

182  

(139  432)
mm

(182  297)
mm

Whale_general-copy_EX.book  11 ページ  ２００２年１１月１３日　水曜日　午後４時５０分

Follow the steps below to set the type and size of the paper loaded in the bypass tray.

(When copy mode is selected)

Touch the [PAPER
SELECT] key in the
main screen of the copy
mode.

(When printer mode is selected)

Touch the [PAPER
SELECT]  key in the
main screen of printer
mode.

(When copy mode is selected)

The key for the selected
paper type will be
highlighted.

(When printer mode is selected)

The steps that follow differ depending on the
paper type selected. Follow the steps for the
selected type.

● If you touched [PLAIN], go to step 6.

● If you touched [HEAVY PAPER], go to step 3

● If you touched [TRANSPARENCY], go to step 4.

● If you touched [ENVELOPE], go to step 5.

For the types of heavy paper that can be used, see
page 2-10.

● SPEED MODE is for fast printing.

● QUALITY MODE is for a high quality image.

 

 

Next touch the 

 key to

highlight it and enter the
dimensions for Y.

The permitted range for
the X dimension is 139
to 432 mm (5-1/2 to 17
inches), and the

permitted range for the Y dimension is 100 to 297
mm (4 to 11-3/4 inches).

PAPER SELECT

 AUTO    A4

100%

PAPER SELECT

A4

CONDITION 

SETTINS

PAPER SELECT

100%

COPY RATIO

PLAIN

HEAVY PAPER

TRANSPARENCY

ENVELOPE

UTO

EXPOSURE

PAPER SELECT

PLAIN

HEAVY PAPER

TRANSPARENCY

ENVELOPE

CONDITION 

SETTINS

HEAVY PAPER1  106g/m

2

  200g/m

2

 

HEAVY PAPER2  201g/m

2

   

300g/m

2

SPEED MODE

QUALITY MODE

YOKEI-4

COM-10

MONARCH

OK

DL

C5

CHOKEI3

YOKEI-2

ENABLE AUTO SIZE DETECTION

EXTRA SIZE

BASIC SETTING

X

Y

139

100

(100  297)

mm

(139  432)

mm

BASIC SETTING

EXTRA SIZE

OK

Whale_general-copy_EX.book  12 ページ  ２００２年１１月１３日　水曜日　午後４時５０分

The items that can be set with the custom settings are shown below.

● Total count ................................... The number of pages processed by the machine and optional equipment

can be displayed. (See page 2-14.)

● Display contrast ........................... Used to adjust the contrast of the operation panel display. (See page 2-14.)
● List print

*1

..................................... Used to print a list of machine settings. (See page 2-14.)

● Clock adjust ................................... Used to set the date and time of the built-in clock of the printer. (See this page.)
● Tray settings................................ The paper type, paper size and automatic tray switching can be set for each

tray. Automatic tray switching allows feeding to switch between trays
loaded with the same type and size of paper. If one tray runs out of paper
during printing, printing will continue from the other tray. (See page 2-14)

For the detailed descriptions and use of the settings listed below, see the Operation manual 
(for network scanner).
● Address control

*2

......................... Used to enter destination e-mail addresses, user indexes and sender

information for systems that have the network scanning function.

● Keyboard select

*2

......................... When using the network scanner, you can switch the arrangement of the

letter keys in the display keyboard used for storing and editing destinations
in the English character entry screen.

● Key operator program.................. These are programs that are used by the key operator (administrator of the

machine) to configure machine settings. A key appears for these settings in
the custom settings menu screen. For information on these settings, see
the  key operator's guide.

*1

List print can be used in a system where the printer and network scanner function can be used.

*2

These settings can be configured in a system where the network scanner function is available.

The custom setting
menu screen will
appear.

In the following type of screen, a setting is turned
on when a checkmark (

) appears next to the

key. A checkmark will appear or disappear by
alternate touches of the checkmark box. In the
following screen, tray 1 can be used in both the
print and copy modes. Tray 2 can only be used in
the copy mode.

The settings accessed by touching the [CLOCK]
key are explained here.

Detailed descriptions for program settings start on
the next page.

The procedure for setting the clock is shown below
as an example.

CUSTOM SETTINGS

TRAY SETTINGS

TRAY 1

TRAY 2

PLAIN /

TYPE / SIZE

COPY

OK

1/2

PLAIN /

PRINT

CUSTOM SETTINGS

TOTAL COUNT

TRAY SETTINGS

ADDRESS 

CONTROL

KEYBOARD 

SELECT

KEY OPERATOR PROGRAMS

CLOCK

DISPLAY 

CONTRAST

LIST PRINT

EXIT

CUSTOM SETTINGS

CLOCK ADJUST

MINUTE

OK

00

00

01

01

2000

YEAR

MONTH

DAY

HOUR

sec_whale_02-1.fm  13 ページ  ２００２年１１月１４日　木曜日　午前８時５４分

If you select a non-existent date (for example,
Feb. 30), the [OK] key will grey out to prevent entry
of the date.

■

■

■

■ Total count

This displays the following sheet counts:

The number of sheets copied and printed.
The number of sheets scanned using the
network scanner function.
The number of sheets used by optional
equipment such as the reversing automatic
document feeder and the duplex module of the
duplex module/2 x 500 sheet paper drawer, and
the number of sheets stapled by the saddle
stitch finisher.

In the case of 

 only,

● Each sheet of paper that is A3 (11" x 17") size or

larger is counted as two sheets.

● Each sheet of paper used for automatic two-sided

copying is counted as two sheets (A3 (11" x 17")
paper is counted as four sheets). (When an optional
duplex module/2 x 500 sheet paper drawer and a
duplex bypass/inverter unit are installed.)

■

■

■

■ Display contrast

Screen contrast adjustment is used to make the
LCD touch panel easier to view under various
lighting conditions. Touch the [LIGHTER] key to
make the screen lighter, or the [DARKER] key to
make the screen darker.

■

■

■

■ List print

Used to print a list of the settings configured in the
printer and network scanner function.

■

■

■

■ Clock adjust

Use this to set the date and time in the machine's
built-in clock. This clock is used by functions that
require date and time information.

■

■

■

■ Tray settings

The paper type, paper size, enabled modes and
automatic tray switching can set for each tray. See
page 2-11 for details on setting the paper type and
paper size. Automatic switching to another paper
tray is used to automatically switch to another tray
with the same size and type of paper in the event
that the paper runs out during continuous printing.
This requires that the trays be loaded with the
same size of paper. To enable any function, touch
the check box key so that a checkmark (

)

appears.

■

■

■

■ Keyboard select

When using the network scanner function, you can
switch the arrangement of the letter keys in the
display keyboard that appear in the character entry
screen when storing or editing destinations. Select
the arrangement of the letter keys that you find
easiest to use.

The following three alphabet keyboard
configurations are available:

● Keyboard 1 (QWERT... configuration)*

● Keyboard  2 (AZERTY...configuration)

● Keyboard  3 (ABCDEF...configuration)
* The default setting is "Keyboard  1".

(Example: Character entry screen when Keyboard
3 is selected)

CUSTOM SETTINGS

TOTAL COUNT

TRAY SETTINGS

KEYBOARD 

SELECT

KEY OPERATOR PROGRAMS

CLOCK

DISPLAY 

CONTRAST

ADDRESS 
CONTROL

LIST PRINT

EXIT

DESTINATION NAME

SPACE

OK

CANCEL

Whale_general-copy_EX.book  14 ページ  ２００２年１１月１３日　水曜日　午後４時５０分