Sharp AR-C260 (serv.man32) User Manual / Operation Manual ▷ View online
JOB PROGRAM MEMORY
6-27
6
Recalling a job program
1
Press the [#/P] key.
2
Touch the desired storage register
number key to recall the job from memory.
number key to recall the job from memory.
When a number key is
touched, the selection
screen will be closed
and the stored job
program will be recalled.
A number for which no
job program has been
stored cannot be
selected.
touched, the selection
screen will be closed
and the stored job
program will be recalled.
A number for which no
job program has been
stored cannot be
selected.
3
Set the number of copies as needed and
press the [COLOUR COPY START
(
press the [COLOUR COPY START
(
)] or [BLACK COPY START (
)]
key.
Copying will start with
the settings of the
recalled job program.
the settings of the
recalled job program.
Deleting a stored job program
1
Press the [#/P] key.
2
Touch the [STORE/DELETE] key to obtain
the storage register screen.
the storage register screen.
3
Select a storage register number of the
program to be deleted.
program to be deleted.
If a number key for which
no job program has
been stored is selected,
the screen will change to
the screen of step 4 on
the previous page (for
storing a job program).
no job program has
been stored is selected,
the screen will change to
the screen of step 4 on
the previous page (for
storing a job program).
4
Touch the [DELETE] key.
When the [DELETE] key
is touched, the screen in
step 3 will return and the
program will be deleted.
If the [CANCEL] key is
touched, the screen in
step 3 will return but the
program will not be
is touched, the screen in
step 3 will return and the
program will be deleted.
If the [CANCEL] key is
touched, the screen in
step 3 will return but the
program will not be
deleted. If no other programs are to be deleted,
touch the [EXIT] key on the screen displayed in
step 3 to exit the job program mode.
touch the [EXIT] key on the screen displayed in
step 3 to exit the job program mode.
JOB PROGRAMS
PRESS PROGRAM NUMBER.
RECALL
M NUMBER.
RECALL
STORE/DELETE
EXIT
STORE/DELETE
NOTE
If overwriting of programmed copy settings has been
prohibited in the key operator programs, you will not
be able to clear a job program. (See page 15 of the
key operator's guide.)
If overwriting of programmed copy settings has been
prohibited in the key operator programs, you will not
be able to clear a job program. (See page 15 of the
key operator's guide.)
REC LL
STORE/DELETE
A JOB PROGRAM HAS BEEN ALREADY STORED.
STORE ANOTHER PROGRAM?
CANCEL
DELETE
STORE
Whale_general-copy_EX.book 27 ページ ２００２年１１月１３日 水曜日 午後４時５０分
6-28
INTERRUPTING A COPY RUN
INTERRUPT can be used to temporarily stop a long copy run so that another copy job can be run.
It is not possible to interrupt an automatic two-sided copy job.
It is not possible to interrupt an automatic two-sided copy job.
1
Touch the [INTERRUPT] key.
If the [INTERRUPT] key
does not appear,
interrupt copying is not
possible.
does not appear,
interrupt copying is not
possible.
When the [INTERRUPT]
key is touched in step 1,
the [INTERRUPT] touch
key will be replaced by
the [CANCEL] key as
shown in the illustration.
key is touched in step 1,
the [INTERRUPT] touch
key will be replaced by
the [CANCEL] key as
shown in the illustration.
2
Place the original for the interrupt copy job
in the document feeder (if a reversing
automatic document feeder is installed) or
on the document glass (page 4-6).
in the document feeder (if a reversing
automatic document feeder is installed) or
on the document glass (page 4-6).
If a black and white copy
job is being interrupted
to run another black and
white copy job, the
number of originals that
can be copied in the
interrupt job is 35.
(based on text original
(A) on page 5-4)
job is being interrupted
to run another black and
white copy job, the
number of originals that
can be copied in the
interrupt job is 35.
(based on text original
(A) on page 5-4)
3
Make all other desired settings such as
exposure, paper size and number of
copies and then press the [COLOUR
COPY START (
exposure, paper size and number of
copies and then press the [COLOUR
COPY START (
)] or [BLACK COPY
START (
)]key.
When making black and
white copying using the
document glass in the
sort mode, replace the
original with the next
original and press the
[BLACK COPY START]
key. Repeat this
operation until all
originals have been
scanned. Then, touch
the [READ-END] key.
white copying using the
document glass in the
sort mode, replace the
original with the next
original and press the
[BLACK COPY START]
key. Repeat this
operation until all
originals have been
scanned. Then, touch
the [READ-END] key.
4
When the interrupt copy job is finished,
touch the [CANCEL] key to turn off the
interrupt copy state.
touch the [CANCEL] key to turn off the
interrupt copy state.
5
Resume the interrupted copy job.
If a colour copy job was interrupted, replace the
originals that have not yet been copied and
resume copying.
If a black and white copy job was interrupted,
replace the originals that have not yet been copied
and press the [BLACK COPY START] key to
resume copying.
originals that have not yet been copied and
resume copying.
If a black and white copy job was interrupted,
replace the originals that have not yet been copied
and press the [BLACK COPY START] key to
resume copying.
NOTES
● If you touch the [INTERRUPT] key when the
● If you touch the [INTERRUPT] key when the
account counter function is turned on, the display
will prompt you to enter your account number.
Enter your account number with the numeric keys.
The copies you make will be added to the count of
the entered account number.
will prompt you to enter your account number.
Enter your account number with the numeric keys.
The copies you make will be added to the count of
the entered account number.
● If the [INTERRUPT] key is touched while an
original is being scanned, the interrupt state will
begin after scanning is completed. If the
[INTERRUPT] key is touched during copying, the
interrupt state will begin after the copy is
completed.
begin after scanning is completed. If the
[INTERRUPT] key is touched during copying, the
interrupt state will begin after the copy is
completed.
● Interrupt copying is not possible during automatic
two-sided copying using the optional duplex
module/2 x 500 sheet paper drawer. In addition,
automatic two-sided copying is not possible during
interrupt copying.
module/2 x 500 sheet paper drawer. In addition,
automatic two-sided copying is not possible during
interrupt copying.
AUTO
EXPOSURE
AUTO A4
PAPER SELECT
100
%
OPY RATIO
PLAIN
INTERRUPT
ORIGINAL
B5
0
X
A4
AUTO
EXPOSURE
AUTO A4
PAPER SELECT
100
%
OPY RATIO
PLAIN
CANCEL
ORIGINAL
5½x8½
0
1
1
X
8½x11
READ-END
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
AUTO
EXPOSURE
AUTO A4
PAPER SELECT
100
%
OPY RATIO
PLAIN
CANCEL
ORIGINAL
5½x8½
0
1
1
X
8½x11
Whale_general-copy_EX.book 28 ページ ２００２年１１月１３日 水曜日 午後４時５０分
7-1
CHAPTER 7
MACHINE MAINTENANCE
(FOR COPYING)
This chapter explains procedures for removing misfeeds in a reversing
automatic document feeder, cleaning the machine, and troubleshooting.
automatic document feeder, cleaning the machine, and troubleshooting.
Page
REMOVING AN ORIGINAL MISFEED ..........................................................7-2
●
Removing a misfed original from the reversing automatic document feeder .....7-2
USER MAINTENANCE ..................................................................................7-3
TROUBLESHOOTING...................................................................................7-4
Whale_general-copy_EX.book 1 ページ ２００２年１１月１３日 水曜日 午後４時５０分
7-2
REMOVING AN ORIGINAL MISFEED
Removing a misfed original from the reversing automatic
document feeder
document feeder
If an original misfeed occurs in the reversing automatic document feeder, follow the steps below to remove the misfed
original.
original.
Check locations A, B, and C in the diagram at left to
remove the original.
remove the original.
1
Removing misfeeds from each location
● Check location A
Open the cover of
the document
feeder and gently
remove the
original, taking
care not to tear it.
the document
feeder and gently
remove the
original, taking
care not to tear it.
● Check location B
Remove the
misfed original. If
the original is
difficult to
remove, open the
RADF exit area
cover and then
remove the
original.
misfed original. If
the original is
difficult to
remove, open the
RADF exit area
cover and then
remove the
original.
Open the RADF
exit area cover
and remove the
misfed original.
exit area cover
and remove the
misfed original.
● Check location C
Open the
document feeder
cover and remove
the misfed
original. If the
original is difficult
to remove, open
the document
document feeder
cover and remove
the misfed
original. If the
original is difficult
to remove, open
the document
feeder cover and then remove the original.
2
Open and close the document feeder
cover.
cover.
Opening and
closing the cover
clears the
misfeed display.
Copying cannot
be resumed until
this step is
performed.
closing the cover
clears the
misfeed display.
Copying cannot
be resumed until
this step is
performed.
However, this step is not necessary after a
misfeed is removed from location C.
misfeed is removed from location C.
A message may appear indicating the number of
originals which must be returned to the document
feeder tray. Return the originals to the document
feeder tray and press the [START] key for colour or
black and white copying as appropriate for the job
being resumed.
originals which must be returned to the document
feeder tray. Return the originals to the document
feeder tray and press the [START] key for colour or
black and white copying as appropriate for the job
being resumed.
NOTES
● For misfeed removal in the main unit and other peripheral devices, see page 2-18.
● When a misfeed occurs, touch the [INFORMATION] key to display detailed information for misfeed removal.
● When a misfeed occurs, touch the [INFORMATION] key to display detailed information for misfeed removal.
A
B
C
RADF exit area cover
Document feeding area cover
Whale_general-copy_EX.book 2 ページ ２００２年１１月１３日 水曜日 午後４時５０分
Click on the first or last page to see other AR-C260 (serv.man32) service manuals if exist.