DOWNLOAD Sharp AR-C260 (serv.man32) Service Manual ↓ Size: 6.42 MB | Pages: 127 in PDF or view online for FREE

When the original and copy paper are of different sizes, CENTRING is used to shift the image  to the centre of the
copy paper but only in the left to right direction.

The [CENTRING] key is
highlighted to indicate
that the function is
turned on, and the
centring icon (

) will

appear in the upper left
of the screen.

Return to the main screen of copy mode.

[Example]

Original

Copy

● This function can be used to reduce a larger sized

original image and centre it on a copy of smaller paper
size, as well as centre a smaller original onto a larger
sized copy.

● This function will not work when non-standard size

originals or copy paper are used. This function cannot
be selected when enlargement copying has been
selected.

About the steps that follow
If a reversing automatic document feeder is
being used, see pages 5-2 through 5-6. If the
document glass is being used, see pages 5-7
through 5-9.

To cancel the CENTRING function, touch the
[CENTRING] key again on the SPECIAL MODES
screen (step1).

CENTRING

ENTS

IMAGE EDIT

OK

 PAGE 

Y

CENTRING

OK

Whale_general-copy_EX.book  7 ページ  ２００２年１１月１３日　水曜日　午後４時５０分

When copying onto transparency film, blank insert sheets can be placed between transparent sheets.
Example: Inserting insert sheets between transparencies

●Insert sheets cannot be copied on in any mode.
●This mode can be selected only in the 1-sided to 1-

sided and 2-sided to 1-sided modes.

●A multiple number of copies cannot be selected in

this mode.

●Transparency film must be fed from the bypass tray.
●Insert sheets must be the same size (A4 or A4R (8-

1/2" x 11" or 8-1/2" x 11"R)) as the transparency film.

●For best results, use SHARP recommended

transparency film.

●When using the "transparency film with insert sheets"

function for colour copying, load the original pages in
reverse order to have the output produced in forward
order.

Before performing the following procedure, touch the [OUTPUT] key in the main screen of Copy mode to display the
OUTPUT settings screen (page 5-5), and then touch the [LEFT TRAY] key* to set the output tray to the left tray*.
* If the optional saddle stitch finisher is installed, touch the [FINISHER TRAY] key to set the output tray to the finisher tray.

The [TRANSPARENCY
INSERTS] key is
highlighted to indicate
that the function is turned
on, and the transparency
inserts icon (

, etc.)

appears in the upper left
of the screen.

Return to the main screen of copy mode.

Remove any paper
already in the bypass
tray before loading the
transparency film. (To
load paper in the bypass
tray, see pages 2-4 and
2-5.)

Touch the
[TRANSPARENCY] key.

SPEED MODE is for fast
printing.
QUALITY MODE is for a
high quality image.

2

3

4

4

3

2

1

4

1

2

3

1

For two-sided originals, 
this is only possible when 
using a reversing 
automatic document 
feeder.

Originals (1-sided)

Originals (2-sided)

Insert sheets

During colour copying,
output takes place in
reverse order.

MARGIN SHIFT

ER

CO

TRANSPARENCY

INSERTS

PLAIN

HEAVY PAPER

TRANSPARENCY

ENVELOPE

A4

AUTO

EXPOSURE

PAPER SELECT

100

%

COPY RATIO

About the steps that follow
If a reversing automatic document feeder is
being used, see pages 5-2 and 5-3. If the
document glass is being used, see pages 5-7
and 5-8.

To cancel the TRANSPARENCY INSERTS function,
touch the [TRANSPARENCY INSERTS] key again
on the SPECIAL MODES screen.

NOTE
When the copy job is finished, remove any
transparencies that remain in the bypass tray.

SPEED MODE

QUALITY MODE

BASIC SETTING

EXTRA SIZE

OK

PLEASE SELECT TRANSPARENCY MODE.

READY TO COPY.

0

INTERRUPT

1.   A4

2.   B4

PLAIN

PLAIN

HEAVY PAPER

TRANSPARENCY

ENVELOPE

RECYCLED

COLOUR

PLAIN

A4

AUTO

EXPOSURE

PAPER SELECT

100

%

COPY RATIO

3.   A3

4.  A4R

sec_whale_06-1.fm  8 ページ  ２００２年１１月１３日　水曜日　午後１１時６分

The COVERS mode is used to place covers on the front, back, or both the front and back of multipage documents.
To use the COVERS mode, an optional reversing automatic document feeder must be installed.

■

■

■

■ Copying onto a cover

■

■

■

■ Not copying onto a cover

One-sided originals

Back cover 
(no copying)

Front cover 
(can copy onto front side)

One-sided copies 
(copying onto a cover)

Two-sided originals

SHARP

SHARP

Cover original

1

2

3

4

1

2

3

4

3

4

5

1

2

Cover original

SHARP

Back cover 
(no copying)

Front cover 
(can copy onto front side)

SHARP

1

2

3

4

5

One-sided originals

Two-sided copies 
(copying onto a cover)

Two-sided originals

2

3

4

1

Cover original

SHARP

1

2

3

4

SHARP

Cover original

2

3

4

1

SHARP

Back cover 
(no copying)

Front cover 
(can copy onto front side) 
(Back side of cover is blank)

Selections for front cover, back cover, or front and back
cover can be made.
Back cover sheets cannot be copied on, either on the
front side or on the back side.

2

3

4

1

Back cover

Front cover 

(not copying onto a cover)

One-sided originals

Two-sided originals

1

2

3

4

1

2

3

4

4

1

2

3

Front cover 

One-sided originals

Two-sided originals

1

2

3

4

4

1

2

3

Back cover

One-sided copies 
(not copying onto a cover)

One-sided copies 
(not copying onto a cover)

Selections for front cover, back cover, or front and back
cover can be made.

Whale_general-copy_EX.book  9 ページ  ２００２年１１月１３日　水曜日　午後４時５０分

The COVERS setting
screen will appear.
The covers icon (

,

etc.) will also appear in
the upper left of the
screen to indicate that
the function is turned on.

Select [FRONT], [BACK] or [FRONT+BACK] on
the touch panel.

Select [YES] or [NO] on
the touch panel. If [YES]
is selected, the first page
of the document will be
copied onto the front
cover sheet.

Return to the SPECIAL MODES screen.

Return to the main screen of copy mode.

Load the same size of
paper as the paper to be
used for the copy job. If
the saddle stitch finisher
is to be used for stapling,
heavy stock cannot be
used for the covers.
(See page 2-10) Paper
within the range of the
stapler must be used.

FT

ERASE

C

ADJU

COVERS

D
P

ENCY

OK

CANCEL

OK

COVERS

SPECIAL MODES

FRONT

BACK

FRONT+BACK

PRINT ON FRONT COVER?

YES

NO

OK

CANCEL

PRINT ON FRONT COVER?

YES

NO

About the steps that follow
See pages 5-2 through 5-6.

NOTE
Be sure to place the originals in the document feeder
tray of the reversing automatic document feeder.
The document glass cannot be used for this function.

NOTES
● When copying a cover in colour, only one copy can

be made, even if a setting is entered for the
number of copies. If you require multiple copies,
reload the original and repeat the copy procedure
as many times as needed.

● During cover copying, the stream feeding mode

will not function even if it is turned on by the
program on page 10 of the key operator's guide.

● During cover copying, the pamphlet copy function

(page 6-25) and the saddle stitch (pamphlet
staple) function (page 3-5) will not operate.

To cancel the COVERS function, select the
COVERS function again and touch the [CANCEL]
key (step2).

Whale_general-copy_EX.book  10 ページ  ２００２年１１月１３日　水曜日　午後４時５０分