DOWNLOAD Sharp AR-C250 (serv.man6) Service Manual ↓ Size: 4 MB | Pages: 127 in PDF or view online for FREE

Model
AR-C250 (serv.man6)
Pages
127
Size
4 MB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Copying Equipment / ARC250-Operation Manual
File
ar-c250-sm6.pdf
Date
PREV: Sharp AR-C250 (serv.man5) Service Manual / Parts Guide

Sharp AR-C250 (serv.man6) User Manual / Operation Manual ▷ View online

7-7
CHAPTER
7
20-BIN STAPLE SORTER (AR-SS2)
Using the optional RADF
1
Set the originals in the document feeder tray face up
with the stapling position in the upper left corner.
●
If the number of copies to be delivered into each bin is more than
30 for A4 or A4R (8-1/2" x 11" or 8-1/2" x 11"R) paper or 25 for
B4 or A3 (8-1/2" x 14" or 11" x 17") paper, the copies will not be
stapled.
2
Press the OUTPUT key and select the STAPLE SORT
mode.
●
Make sure that there is no paper in any sort bin before selecting
the STAPLE SORT mode.
3
Set the number of copies.
●
Up to 20 sets can be made.
4
Press the COLOUR COPY START (
) key or BLACK
COPY START (
) key.
●
When copying and sorting are completed, each set of copies will
be automatically stapled.
●
Sets of copies containing copies of different width will not be
stapled.
Stapling position
OPTIONAL EQUIPMENT
20-bin staple sorter (AR-SS2)
SORT
STAPLE
SORT
GROUP
OK
PAPER SELECT
100%
COPY RATIO
AUTO
A4
OUTPUT
2-SIDED
COPY
1
2
3
4
5
6
7
8
9
0
P
C
CA
CLEAR
PROGRAM
AUDIT
INTERRUPT
CLEAR
ALL
N
3
6
9
P
C
CA
CLEAR
PROGRAM
INTERRUPT
CLEAR
ALL
7-8
CHAPTER
7
20-BIN STAPLE SORTER (AR-SS2)
Manual stapling
To use the stapling feature only, without using the STAPLE SORT
mode, follow the procedure below.
Copies
Stapling location
1
Align the edges of the copies to be stapled.
2
Place the set of copies into the top bin, making sure the
edges are flush with the inner right corner, as shown in
the figure.
●
Make sure that there is no paper in the other sort bins. If there
is, the manual staple key will not light up.
●
Up to 30 sheets of 80 
g
/m
2
 (21 lb.)paper can be stapled together.
Exceeding this maximum may result in damage to the stapler.
3
Press the manual staple key when it lights up.
●
The set of copies will be stapled.
OPTIONAL EQUIPMENT
20-bin staple sorter (AR-SS2)
7-9
CHAPTER
7
20-BIN STAPLE SORTER (AR-SS2)
1
Open the stapler cover.
2
Lift the release lever and pull out the staple box.
●
Lift the release lever to unlock the staple box. Then pull out the
box.
3
Remove the empty staple cartridge from inside the
staple box.
4
Insert the new staple cartridge into the box until it clicks
in place.
●
Insert the new cartridge by aligning the arrows on the cartridge
with those on the box. Check that the cartridge locks in place by
pulling it slightly.
●
The cartridge holds 5,000 staples.
NOTE:
Be sure not to remove the rear paper and tape before inserting
the cartridge.
Staple cartridge replacement
When the staple cartridge becomes empty, the message “
ADD
STAPLES.
” will appear. Replace the staple cartridge as follows:
OPTIONAL EQUIPMENT
20-bin staple sorter (AR-SS2)
7-10
CHAPTER
7
20-BIN STAPLE SORTER (AR-SS2)
5
Remove the rear paper and tape from the cartridge.
●
Pull them straight. If they are pulled obliquely, the tape may be
torn.
6
Insert the staple box into the stapler until it clicks in
place.
7
Close the stapler cover.
8
Place a sheet of paper into the top bin. Press the manual
staple (
) key on the staple sorter when it lights up.
●
Check to see whether the sheet is stapled.
If it is not stapled, press the manual staple key again.
●
If the stapler does not operate properly even after
replacement, a staple may be jammed in it. See next page.
●
Staples for the staple sorter are available from your Sharp
dealer.
OPTIONAL EQUIPMENT
20-bin staple sorter (AR-SS2)
Page of 127
Display

Click on the first or last page to see other AR-C250 (serv.man6) service manuals if exist.

RANDOM: