DOWNLOAD Sharp AR-C250 (serv.man6) Service Manual ↓ Size: 4 MB | Pages: 127 in PDF or view online for FREE

Specifications

Copier dimensions

750 mm (W) x 695 mm (D) x 1060 mm (H)

(with optional document

(29-17/32" (W) x 27-3/8" (D) x 41-47/64" (H))

cover)

Operating conditions*

Temperature: 15°C to 35°C (59°F to 95°F)
Humidity:

20% to 80%

* If the temperature is higher than 30°C (86°F), the humidity should

be lower than 60%.

Optional equipment

Document cover (AR-VR2)
Reversing automatic document feeder (AR-RF1)
20-bin staple sorter (AR-SS2)
Finisher (AR-FN4)
Large capacity tray (AR-LC2)
500-sheet paper drawer (AR-CS2)
Duplex module (AR-DU2)

Acceptable originals

Single-sided originals: 50 to 128

g

/m

2 

(14 to 34 lbs.)

Weight:

Two-sided originals: 50 to 128

g

/m

2 

(14 to 34 lbs.) for A5 and A4 (5-1/2"

x 8-1/2" and 8-1/2" x 11") originals.
50 to 110

g

/m

2 

(14 to 29 lbs.) for B4 and A3 (8-1/2" x 14" and 11" x 17")

originals.

Size:

A5 to A3 (5-1/2" x 8-1/2" to 11" x 17")

Capacity:

Up to 50 sheets for A5 and A4 (5-1/2" x 8-1/2" and 8-1/2" x 11")

originals provided the total aggregate thickness does not exceed
6.5mm or 1/4" (50 to 80

g

/m

2

 (14 to 21 lbs.)) or 5 mm or 3/16" (80 to

128

g

/m

2 

(21 to 34 lbs.))

Up to 30 sheets for B4 and A3 (8-1/2" x 14" and 11" x 17") originals

Paper type

Ordinary paper only

Number of copies

1 (trayless system)

Copy paper size

A5, A4, A4R, B4, A3 (7-1/4" x 10-1/2"R, 8-1/2" x 11", 8-1/2" x 11"R,
8-1/2" x 14", 11" x 17")
In some regions, 216mm x 330mm (8-1/2" x 13") size paper can be
used in place of B4 (8-1/2" x 14") .

Copy paper weight

60 to 105 

g

/m

2

 (15 lbs. to 28 lbs.)

Specifications are subject to change for improvement without notice.

This chapter describes operating instructions for the 20-Bin Staple Sorter
(AR-SS2), Large Capacity Tray (AR-LC2) and Finisher (AR-FN4).

                                      Page

●

●

●

●

●

7-2

●

●

●

●

●

7-3

Part names

7-3

Using the staple sorter

7-4

Sorter capacity

7-5

Staple sort

7-6

Manual stapling

7-8

Staple cartridge replacement

7-9

Staple jam removal

7-11

Misfeed removal

7-13

Specifications

7-14

●

●

●

●

●

7-15

Part names

7-15

Specifications

7-15

Loading copy paper

7-16

Misfeed removal

7-17

●

●

●

●

●

7-19

Part names

7-19

Specifications

7-19

Offset stack

7-20

Staple print

7-21

Staple cartridge replacement

7-22

Staple jam removal

7-24

Misfeed removal

7-26

The options which are available for this copier are shown below.

System configuration

The front cover is to be
transferred from the main unit.

Document cover (AR-VR2)

Reversing automatic
document feeder (AR-RF1)

Duplex module
 (AR-DU2)

20-bin staple sorter (AR-SS2)

NOTE:
The specifications of the 500-sheet
paper drawer (AR-CS2) are the same as
those of the paper trays in the copier.
See page 4-2.

Large capacity tray (AR-LC2)

500-sheet paper drawer (AR-CS2)

Finisher (AR-FN4)

Optional printer connection kit (AR-PX1 or PX2)
Optional printer controller (AR-PE1)