DOWNLOAD Sharp AR-C150 (serv.man70) Service Manual ↓ Size: 311.64 KB | Pages: 9 in PDF or view online for FREE

CCE051

Sharp Electronics (UK) Ltd., Technical Services Group

!"#$%&

'()"*$&

)+,-,#.

14-41

43-49

61-1

VHI28F161-11F

VHI28F161A36F

BB

PCU main flash ROM

39-3

62-1

VHI28F162A02F

VHI28F162A29F

BG

ICU flash PWB

AR-C150

 4-32

63-1

VHI28F161A15F

VHI28F161A37F

BF

OPE flash PWB

14-41

43-49

61-1

VHI28F161A35F

VHI28F161A38F

BB

PCU main flash ROM

39-3

62-1

VHI28F162A27F

VHI28F162A30F

ICU flash PWB

1

AR-C250

All

 4-32

63-1

VHI28F162A28F

VHI28F162A31F

BG

OPE flash PWB

2000/11

4

1. Interchangeable.

4. Not interchangeable.

2. Current type can be used in place of new type.

New type cannot be used in place of current type.

5. Interchangeable if replaced with same types of

related parts in use.

3. Current type cannot be used in place of new type.

New type can be used in place of current type.

6. Others.

Parts marked with "

" is important for maintaining the safety of the set. Be sure to replace these parts with specified ones for

maintaining the safety and performance of the set.

1. CHANGE CARRIED OUT IN THE DISPLAY OF THE EXISTING SETTINGS AND IN ACCORDANCE WITH THIS

CHANGE, CHANGE CARRIED OUT IN THE METHOD OF OPERATIONS.
(1)

Touching the mode key reverses the display.

•

 

Selection between [Automatic] and [Manual] of the Exposure Mode is not enabled. (Registration of the
darkness level during manual operations is also not enabled.)

CCE051

Sharp Electronics (UK) Ltd., Technical Services Group

* The Exposure Mode is set to [Automatic] when the machine returns to initial status after carrying out

registration of any of the following for the Original Document Mode: [Text/Printed Photo], [Text/Photo], or
[Text]. In all other cases, the Exposure Mode is set to [Manual]. (In addition to the three Original Document
Modes, Exposure Mode is set to [Manual] after registration of Copy Original Document Mode has been
carried out.)

(2) [Paper] Selection.

Window

* Optional Paper Tray/LCC Status (Level 1/5).

(3) [Copy Ratio] Selection.

* The Copy Ratio display is blank when the Setting Palette is opened.

Window

* The copy ratio is displayed in the display window when the Copy Ratio key is selected. (The window shows

the display when a copy ratio of 100% has been selected.)

Window

CCE051

Sharp Electronics (UK) Ltd., Technical Services Group

(4) [2-Sided Copy] Selection.

* OC Model. (If the [2-Sided Copy] key is depressed when the 2-Sided Module is not installed, the following

window is displayed.)

Window

* Touching the Mode Key reverses the display.

* DF Model. (If the [2-Sided Copy] key is depressed when the 2-Sided Module is not installed, the following

window is displayed.)

Window.

* Touching the Mode Key reverses the display.

(5) [Output] Selection.

* When the AR-SS2 is installed.

Window.

CCE051

Sharp Electronics (UK) Ltd., Technical Services Group

Window.

* Touching the Mode Key reverses the display.

* Changes in the settings during initial status are possible after mode cancellation has been carried out by

the CA Key during Auto-Clear operations and after the power supply has been turned ON.

* Registration of special modes, operation guide, copy interrupt, and no. of copies is not enabled. (The

warning signal will sound if the function key is touched while registration is not enabled.)

* If the ADU status is set to Not Installed or Use Prohibited when S --> D or D --> D mode is registered as the

initial status, S --> S mode is set as the default.

* If the RADF status is set to Not Installed or Use Prohibited when D --> D or D --> S mode is registered as

the initial status, S --> S mode is set as the default.

* If [Return to the Factory Default Settings] is selected, the Factory Settings are immediately set as the Copy

Mode Initial Status.

* If [Return to the Factory Default Settings] is selected when the LCC is installed, the LCC is set as the

selection tray default.

* If [Return to the Factory Default Settings] is selected when the LCC is not installed, Tray 1 is set as the

selection tray default.

* Due to the fact that the initial factory settings of the machine are stored in the ROM, changes cannot be

written in.

(6) P 38: Transfer Belt Position Setting

* Color, or Black & White can be set for the Transfer Belt Position.
* Default: Color (When the settings window is opened, however, both "Color" and "Black & White" are displayed

as not being selected. The previous settings are not displayed.)

* The following events will return the machine to the home position.

a. Initialization operations after the power supply is turned ON.
b. The CA key is ON.
c. Auto-Clear.

Window

* All setting selections on the settings palette are displayed as not being selected. (The previous settings are

not displayed.)

* After either "Color" or "Black & White" has been selected, the OK Key will record the setting data in the

memory. If the OK Key is depressed, the display will return to the Key Operator Function Settings Menu.