Sharp AR-C150 (serv.man7) User Manual / Operation Manual ▷ View online
2-19
CHAPTER
2
MAKING COPIES
Job memory
Deleting a stored job program
1
Follow steps 1 and 2 in “Storing a job program” on the
previous page. (1. Press the PROGRAM (
previous page. (1. Press the PROGRAM (
P
) key. 2.
Press the “STORE/DELETE” key.)
2
Select the storage register number of the program to be
deleted.
deleted.
●
Be sure to select a number which contains a stored program. If
not, “Storing a job program” operation will start.
not, “Storing a job program” operation will start.
3
Press the “DELETE” key or the “CANCEL” key.
●
If the “DELETE” key is pressed, the program will be deleted from
memory.
memory.
●
Press the “CANCEL” key to keep the program.
4
Press the “EXIT” key to exit the job memory mode.
Recalling a job program
1
Press the PROGRAM (
P
) key.
●
The JOB PROGRAMS screen will appear on the touch panel.
●
The numbers which are indicated are program numbers which
contain stored programs.
contain stored programs.
2
Select a stored program from 1 to 9 on the touch panel.
●
All selections stored in the program will appear on the touch
panel.
panel.
●
The recalled settings may be modified for a particular job run, but
any changes made will not be stored in the job memory. To store
the new settings, follow the “Storing a job program” procedure.
any changes made will not be stored in the job memory. To store
the new settings, follow the “Storing a job program” procedure.
JOB MEMORY
JOB PROGRAMS
STORE/DELETE
RECALL
PRESS PROGRAM NUMBER.
EXIT
JOB PROGRAMS
JOB PROGRAM HAS BEEN ALREADY STORED.
STORE ANOTHER PROGRAM?
OR DELETE?
CANCEL
DELETE
STORE
STORE/DELETE
RECALL
PRESS PROGRAM NUMBER.
JOB PROGRAMS
STORE/DELETE
RECALL
PRESS PROGRAM NUMBER.
EXIT
JOB PROGRAMS
STORE/DELETE
RECALL
PRESS PROGRAM NUMBER.
EXIT
8
9
0
P
C
CLEAR
PROGRAM
IT
2-20
CHAPTER
2
1
Press the INTERRUPT (
) key.
●
When the optional document feeder is being used, the copier will
stop after completing the copying of the originals which have
been fed into the document feeder. The INTERRUPT indicator
will blink until the copier becomes ready for interrupt copying.
Then the INTERRUPT indicator will light up.
The copier will return to the initial setting.
stop after completing the copying of the originals which have
been fed into the document feeder. The INTERRUPT indicator
will blink until the copier becomes ready for interrupt copying.
Then the INTERRUPT indicator will light up.
The copier will return to the initial setting.
●
If the copier has been programmed in the auditing mode, the
account number entry message will appear. Enter your account
number using the 10-key pad. The number of copies of the
interrupt copying will be accumulated against this account
number.
account number entry message will appear. Enter your account
number using the 10-key pad. The number of copies of the
interrupt copying will be accumulated against this account
number.
2
When the copier stops, remove the original(s) and set
the original(s) for interrupt copying on the document
glass or in the optional document feeder tray.
the original(s) for interrupt copying on the document
glass or in the optional document feeder tray.
3
Select the desired available copier functions.
4
Press the COLOUR COPY START (
) key BLACK
COPY START (
) key.
5
When the interrupt copy run is complete, press the
INTERRUPT (
INTERRUPT (
) key again to cancel the mode and
remove the original(s) used for interrupt copying.
●
The copier will reset itself to the functions which were in use
before the INTERRUPT (
before the INTERRUPT (
) key was first pressed.
6
Replace the original(s) for the interrupted job and press
the COLOUR COPY START (
the COLOUR COPY START (
) key or BLACK COPY
START (
) key to resume copying.
●
If scanning of originals has been already complete, the original
need not be replaced.
need not be replaced.
MAKING COPIES
Interrupting a copy run
INTERRUPTING A COPY RUN
INTERRUPT can be used to temporarily stop a long copy run so that
another job can be run.
another job can be run.
●
INTERRUPT will not function during duplex copying (when an
optional duplex module (AR-DU2) is installed).
optional duplex module (AR-DU2) is installed).
●
Duplex copying, sort, group, and staple sort cannot be selected
during interrupt copying. Also job program recall cannot be selected.
during interrupt copying. Also job program recall cannot be selected.
3
6
CA
INTERRUPT
CLEAR
ALL
3
6
CA
INTERRUPT
CLEAR
ALL
3
6
9
P
C
CA
CLEAR
PROGRAM
INTERRUPT
CLEAR
ALL
3-1
CHAPTER
3
CHAPTER 3
SPECIAL FUNCTIONS
This chapter describes the special copying functions including various
image editing functions which have been made possible by digital image
processing technology.
image editing functions which have been made possible by digital image
processing technology.
Page
●
●
●
●
●
XY ZOOM
.......................................
3-2
●
●
●
●
●
MARGIN SHIFT
...................................
3-4
●
●
●
●
●
EDGE ERASE
....................................
3-6
●
●
●
●
●
DUAL PAGE COPYING
.............................
3-8
●
●
●
●
●
CENTRING
.....................................
3-10
●
●
●
●
●
TRANSPARENCY FILM WITH INSERT SHEETS
..........
3-12
●
●
●
●
●
COVERS
.......................................
3-14
●
●
●
●
●
COLOUR ADJUSTMENTS
..........................
3-16
RGB adjust
.....................................
3-16
Sharpness
......................................
3-18
Suppress background
..............................
3-20
Brightness/intensity/contrast
.........................
3-22
●
●
●
●
●
IMAGE EDITING FUNCTIONS
.......................
3-24
Single colour
....................................
3-24
Neg. /pos. reverse
.................................
3-26
Mirror image
.....................................
3-28
Photo repeat
....................................
3-30
A3 (11 x 17) full-bleed
..............................
3-32
Multi-page enlargement
.............................
3-34
3-2
CHAPTER
3
1
Place the original on the document glass or in the
optional document feeder tray.
optional document feeder tray.
2
Press the “COPY RATIO” key on the touch panel.
3
Press the “XY ZOOM” key.
●
The following screen will appear.
4
Use the reduction, enlargement , and ZOOM (
,
)
keys to change the copy ratio in the horizontal (X)
direction.
direction.
●
Press a reduction key or an enlargement key to set the
approximate ratio, then press the
approximate ratio, then press the
key to decrease the ratio
or
key to increase the ratio.
XY ZOOM
The XY ZOOM feature allows the horizontal and vertical copy ratios to
be changed independently. If this feature is selected, the copy ratios
can be set from 25% to 400%.
be changed independently. If this feature is selected, the copy ratios
can be set from 25% to 400%.
SPECIAL FUNCTIONS
XY zoom
Original
Copy
ELECT
100%
COPY RATIO
A4
AUTO
XY ZOOM
10
ZOO
MENU
70%
81%
EXPOSURE
PAPER S
A4
A3
A3
A5
A4
A4
B5
B4
B4
A5
A4
A4
AUTO
OUTPUT
COPY
READY TO COPY.
AUTO
XY ZOOM
X
Y
100%
ZOOM
100
100
%
%
OK
70%
64%
50%
141%
200%
400%
EXPOSURE
PAPER SELECT
100%
COPY RATIO
CANCEL
AUTO A4
READY TO COPY.
AUTO
XY ZOOM
CANCEL
X
Y
100%
ZOOM
100
100
%
%
OK
70%
64%
50%
141%
200%
400%
EXPOSURE
PAPER SELECT
100%
COPY RATIO
AUTO A4
Click on the first or last page to see other AR-C150 (serv.man7) service manuals if exist.