Sharp AR-C150 (serv.man7) User Manual / Operation Manual ▷ View online
2-15
CHAPTER
2
Two-sided copying with bypass tray
Two-sided copies can be made manually using the bypass tray. The
procedure described below is useful for users of the copier without an
optional duplex module (AR-DU2).
procedure described below is useful for users of the copier without an
optional duplex module (AR-DU2).
1
Place the first original face down on the document glass
and make a copy.
and make a copy.
●
The first side of the copy can be made using any of the paper feed
stations.
stations.
2
Remove the first original and place the second original
face down on the document glass.
face down on the document glass.
●
Make sure the first and second originals are oriented in the same
way on the document glass.
way on the document glass.
●
If an optional document feeder is used, the originals must be fed
one at a time.
one at a time.
3
Turn the first copy over without changing its top-bottom
orientation and place it into the bypass tray.
orientation and place it into the bypass tray.
●
Be sure to feed the copies one sheet at a time.
4
Press the “PAPER SELECT” key and select the desired
paper type in the bypass tray section.
paper type in the bypass tray section.
5
Press the COLOUR COPY START (
) key or BLACK
COPY START (
) key.
SPECIAL PAPERS (manual feed)
MAKING COPIES
Special papers (manual feed)
1 2
1 2
3 4
3 4
1 2
C
CA
CLEAR
INTERRUPT
CLEAR
ALL
ER SELECT
100%
COPY RATIO
INFORMATION
CUSTOM
SETTINGS
PAPER TYPE
.
.
.
A4
A3
B4
A4
60~105
g
/m
2
106~200
g
/m
2
TRANSPARENCY
2-16
CHAPTER
2
Automatic
This is the standard initial setting for this copier. In this mode, the
characteristics of an original being copied are “read” by the exposure
system, and exposure adjustments are made automatically.
This optimizes the contrast of the copied images.
characteristics of an original being copied are “read” by the exposure
system, and exposure adjustments are made automatically.
This optimizes the contrast of the copied images.
Original image type
Text/photo mode: This mode provides the best balance for copying
an original which contains both text and photos.
Text mode:
This mode is useful in enhancing very low density
areas of an original or in suppressing unusually
high-density background areas.
areas of an original or in suppressing unusually
high-density background areas.
Photo mode:
This mode provides the best copies of photographs
with fine details.
with fine details.
Printed photo mode:
This mode is useful for copying printed
photographs.
photographs.
Map mode:
This mode is useful to provide the best shading
and fine details found on most maps.
and fine details found on most maps.
1
Press the “EXPOSURE” key on the touch panel.
EXPOSURE ADJUSTMENTS
Exposure selections for this copier should be selected according to
the type of originals being copied: TEXT/PHOTO, TEXT, PHOTO,
PRINTED PHOTO or MAP. If the original image type is TEXT/
PHOTO or TEXT, the exposure can be adjusted automatically or
manually. If the original image type is PHOTO, PRINTED PHOTO or
MAP, the exposure can be adjusted manually only. The standard
initial setting of the original image type for this copier is TEXT/
PHOTO.
the type of originals being copied: TEXT/PHOTO, TEXT, PHOTO,
PRINTED PHOTO or MAP. If the original image type is TEXT/
PHOTO or TEXT, the exposure can be adjusted automatically or
manually. If the original image type is PHOTO, PRINTED PHOTO or
MAP, the exposure can be adjusted manually only. The standard
initial setting of the original image type for this copier is TEXT/
PHOTO.
When copying a coloured original in the Black/White copy mode, a
coloured background with text in the background area may be
copied with the text obscured. Check with the key operator for the
setting of “Disabling of Pre-scan in B/W Copy” program (see page
8-30). If pre-scan is enabled, such obscuring may be reduced.
coloured background with text in the background area may be
copied with the text obscured. Check with the key operator for the
setting of “Disabling of Pre-scan in B/W Copy” program (see page
8-30). If pre-scan is enabled, such obscuring may be reduced.
MAKING COPIES
Exposure adjustments
AUTO
EXPOSURE
UTPUT
AUTO
EXPOSURE
PAPER
AUTO
2-17
CHAPTER
2
MAKING COPIES
Exposure adjustments
2
Select “TEXT/PHOTO” , “TEXT” , “PHOTO” , “PRINTED
PHOTO” or “MAP” depending on the original.
PHOTO” or “MAP” depending on the original.
3
If “TEXT” or “TEXT/PHOTO” has been selected in step
2, select “AUTO” or “MANUAL”.
2, select “AUTO” or “MANUAL”.
4
If the manual mode has been selected, use the
and
keys to adjust the copy density as desired.
EXPOSURE ADJUSTMENTS
ORIGINAL IMAGE TYPE
TEXT/PHOTO
PHOTO
TEXT
PRINTED
PHOTO
MAP
100%
OK
AUTO A4
ORIGINAL IMAG
TEXT/PHOT
PHOTO
MAP
EXPOSURE
EXPOSURE
AUTO
MANUAL
PAPER SELECT
OUTPUT
AUTO A4
2-SIDED
COPY
UTPUT
ORIGINAL
TEXT/
PHOTO
MAP
EXPOSURE
AUTO
MANUAL
AUTO 8
1
SIDED
OPY
2-18
CHAPTER
2
JOB MEMORY
Frequently used job programs can be stored in one of nine storage
registers. This is convenient for quick job recall without losing time
manually reprogramming each aspect of the job.
registers. This is convenient for quick job recall without losing time
manually reprogramming each aspect of the job.
●
All functions that can be set in the copy mode except the copy
quantity setting can be stored in the job memory.
quantity setting can be stored in the job memory.
●
If any function which has been stored in a job program is modified
by a key operator program, the key operator settings will supercede
the previous setting.
by a key operator program, the key operator settings will supercede
the previous setting.
★ KEY OPERATOR
Job memory replacement/deletion can be
prohibited. See page 8-28.
Storing a job program
1
Press the PROGRAM (
P
) key.
●
The JOB PROGRAMS screen will appear on the touch panel.
2
Press the “STORE/DELETE” key on the touch panel.
●
To cancel the job memory mode, press the “EXIT” key or the
CLEAR ALL (
CLEAR ALL (
CA
) key.
3
Select a program number from 1 to 9 on the touch panel.
●
The numbers which are highlighted are program numbers which
have been used.
have been used.
●
If a program number which has been used is entered, a message
will appear to confirm the selection. To replace with the new
program, press the “STORE” key and proceed to the next step.
To cancel replacement, press the “CANCEL” key.
will appear to confirm the selection. To replace with the new
program, press the “STORE” key and proceed to the next step.
To cancel replacement, press the “CANCEL” key.
4
Make all copier selections to be stored.
5
Press the “OK” key to complete the storage.
MAKING COPIES
Job memory
STORE/DELETE
RECALL
JOB PROGRAMS
STORE/DELETE
RECALL
PRESS PROGRAM NUMBER.
EXIT
AUTO
EXPOSURE
PAPER SELECT
100%
COPY RATIO
MAKE COPIER SELECTIONS AND PRESS
[OK].
OK
CANCEL
A4
A3
B4
B4
AUTO A4
8
9
0
P
C
CLEAR
PROGRAM
IT
Click on the first or last page to see other AR-C150 (serv.man7) service manuals if exist.