Sharp AR-C150 (serv.man7) User Manual / Operation Manual ▷ View online
2-7
CHAPTER
2
1-sided copies of 1-sided originals
1
Adjust the original guides to the size of the originals and
set the originals face up in the document feeder tray.
set the originals face up in the document feeder tray.
●
The original size will be indicated on the touch panel, and the
paper tray with the corresponding paper size will be automatically
selected.
paper tray with the corresponding paper size will be automatically
selected.
●
Be sure to remove any original from the document glass before
setting the originals in the document feeder tray. If an original is
left on the document glass, the original reminder indicator will
blink. Remove the original from the document glass in this case.
setting the originals in the document feeder tray. If an original is
left on the document glass, the original reminder indicator will
blink. Remove the original from the document glass in this case.
●
If copy paper of the required size is not installed in any of the
trays, the following message will appear.
trays, the following message will appear.
LOAD
PAPER.
If a tray of the required size is not installed, use the bypass tray
and press the “PAPER SELECT” key on the touch panel to select
the bypass tray.
and press the “PAPER SELECT” key on the touch panel to select
the bypass tray.
●
To copy onto a different size paper, use the “PAPER SELECT”
key to make the selection.
key to make the selection.
2
Ensure that the 1-sided to 1-sided copying mode is
selected on the touch panel.
selected on the touch panel.
●
When no icon is displayed in the area indicated in the illustration
(
(
), the 1-sided to 1-sided copying mode is selected.
●
If the 1-sided to 1-sided mode is not selected, press the
2-SIDED COPY key and then press the 1-sided to 1-sided key
(
2-SIDED COPY key and then press the 1-sided to 1-sided key
(
) on the touch panel. Press the “OK” key to return to the
basic screen.
3
Use the 10-key pad to enter the desired number of
copies.
copies.
●
The number will be shown in the copy quantity display of the
touch panel.
touch panel.
●
Use the CLEAR (
C
) key to cancel an entry if a mistake has been
made.
4
Press the COLOUR COPY START (
) key or BLACK
COPY START (
) key.
●
To perform colour copying, press the COLOUR COPY START
(
(
) key. To perform black/white copying, press the BLACK
COPY START (
) key.
●
To cancel a copy run, press the CLEAR ALL (
CA
) key. Copying
will stop and the RADF will output any originals which have been
fed. Also, the number in the copy quantity display will be reset to
0.
fed. Also, the number in the copy quantity display will be reset to
0.
MAKING COPIES
Using the RADF
USING THE RADF
READY TO COPY.(DOCUMENT FEEDER MODE)
AUTO
EXPOSURE
PAPER SELECT
100%
COPY RATIO
A4
A4
A3
B4
B4
AUTO A4
ORIGINAL
1
2
3
4
5
6
7
8
9
0
P
C
CA
CLEAR
PROGRAM
AUDIT
INTERRUPT
CLEAR
ALL
N
3
6
9
P
C
CA
CLEAR
PROGRAM
INTERRUPT
CLEAR
ALL
2-8
CHAPTER
2
MAKING COPIES
Using the RADF
USING THE RADF
2-sided copies from 1-sided originals
To copy in the 1-sided to 2-sided copy mode, an optional duplex module
(AR-DU2) must be installed.
(AR-DU2) must be installed.
1
Adjust the original guides to the size of the originals and
set the originals face up in the document feeder tray.
set the originals face up in the document feeder tray.
2
Press the 2-SIDED COPY key.
3
If the number of originals is known, use the
(EVEN
NUMBER ORIGINALS) key or
(ODD NUMBER
ORIGINALS) key on the touch panel, then proceed to
step 4. If the number of originals is not known, select
“PRE-COUNT” for an automatic count by the RADF and
press the COLOUR COPY START (
step 4. If the number of originals is not known, select
“PRE-COUNT” for an automatic count by the RADF and
press the COLOUR COPY START (
) key or BLACK
COPY START (
) key.
●
The following message will appear.
PRE-COUNT MODE
NUMBER OF ORIGINALS IS **.
NUMBER OF ORIGINALS IS **.
**.
**.
**.
**.
If the number of originals exceeds the limit, other messages will
appear.
appear.
●
When the count is complete and the number is known, replace
the originals in the document feeder tray and select “EVEN
NUMBER ORIGINALS” or “ODD NUMBER ORIGINALS” as
above.
the originals in the document feeder tray and select “EVEN
NUMBER ORIGINALS” or “ODD NUMBER ORIGINALS” as
above.
4
Press the “OK” key.
5
Enter the desired number of copies.
●
To perform colour copying in the duplex mode or to perform B/W
copying onto paper larger than A4 (8-1/2" x 11") size in the
duplex mode, only one copy per original can be made. If a
multiple number of copies is set, the number of copies will be set
to 1 when a START (
copying onto paper larger than A4 (8-1/2" x 11") size in the
duplex mode, only one copy per original can be made. If a
multiple number of copies is set, the number of copies will be set
to 1 when a START (
,
) key is pressed.
6
Press the COLOUR COPY START (
) key or BLACK
COPY START (
) key.
●
To perform colour copying, press the COLOUR COPY START
(
(
) key. To perform black/white copying, press the BLACK
COPY START (
) key.
●
To cancel a copy run during duplex copying, press the CLEAR
ALL (
ALL (
CA
) key.
OUTPUT
2-SIDED
COPY
AUTO
READY TO COPY.(DOCUMENT FEEDER MODE)
2-SIDED COPY
PRE-COUNT
EVEN NUMBER
ORIGINALS
ODD NUMBER
ORIGINALS
OK
AUTO
EXPOSURE
PAPER SELECT
100%
COPY RATIO
AUTO A4
READY TO COPY.(DOCUMENT FEEDER MODE)
2-SIDED COPY
PRE-COUNT
EVEN NUMBER
ORIGINALS
ODD NUMBER
ORIGINALS
OK
AUTO
EXPOSURE
PAPER SELECT
100%
COPY RATIO
AUTO A4
Maximum height
line
line
C
CA
CLEAR
INTERRUPT
CLEAR
ALL
1
2
3
4
5
6
7
8
9
0
P
C
CL
PROGRAM
AUDIT
INTE
CLE
AL
2-9
CHAPTER
2
MAKING COPIES
Using the RADF
USING THE RADF
2-sided copies from 2-sided originals
To copy in the 2-sided to 2-sided mode, an optional duplex module (AR-
DU2) must be installed.
DU2) must be installed.
1
Adjust the original guides to the size of the originals and
set the originals face up in the document feeder tray.
set the originals face up in the document feeder tray.
2
Press the 2-SIDED COPY key.
3
Press the
key on the touch panel.
4
Press the “OK” key.
5
Enter the desired number of copies.
●
To perform colour copying in the duplex mode or to perform B/W
copying onto paper larger than A4 (8-1/2" x 11") size in the
duplex mode, only one copy per original can be made. If a
multiple number of copies is set, the number of copies will be set
to 1 when a START (
copying onto paper larger than A4 (8-1/2" x 11") size in the
duplex mode, only one copy per original can be made. If a
multiple number of copies is set, the number of copies will be set
to 1 when a START (
,
) key is pressed.
6
Press the COLOUR COPY START (
) key or BLACK
COPY START (
) key.
●
To perform colour copying, press the COLOUR COPY START
(
(
) key. To perform black/white copying, press the BLACK
COPY START (
) key.
●
To cancel a copy run during duplex copying, press the CLEAR
ALL (
ALL (
CA
) key.
OUTPUT
2-SIDED
COPY
AUTO
READY TO COPY.(DOCUMENT FEEDER MODE)
2-SIDED COPY
PRE-COUNT
EVEN NUMBER
ORIGINALS
ODD NUMBER
ORIGINALS
OK
AUTO
EXPOSURE
PAPER SELECT
100%
COPY RATIO
AUTO A4
Maximum height
line
line
READY TO COPY.(DOCUMENT FEEDER MODE)
2-SIDED COPY
PRE-COUNT
EVEN NUMBER
ORIGINALS
ODD NUMBER
ORIGINALS
OK
AUTO
EXPOSURE
PAPER SELECT
100%
COPY RATIO
AUTO A4
C
CA
CLEAR
INTERRUPT
CLEAR
ALL
1
2
3
4
5
6
7
8
9
0
P
C
CL
PROGRAM
AUDIT
INTE
CLE
AL
2-10
CHAPTER
2
1-sided copies from 2-sided originals
1
Adjust the original guides to the size of the originals and
set the originals face up in the document feeder tray.
set the originals face up in the document feeder tray.
2
Press the 2-SIDED COPY key.
3
Press the
key on the touch panel.
4
Press the “OK” key.
5
Enter the desired number of copies.
6
Press the COLOUR COPY START (
) key or BLACK
COPY START (
) key.
●
To perform colour copying, press the COLOUR COPY
START(
START(
) key. To perform black/white copying, press the
BLACK COPY START (
) key.
●
To cancel a copy run, press the CLEAR ALL (
CA
) key. Copying
will stop and the RADF will output any originals which have been
fed. Also, the number in the copy quantity display will be reset to
0.
fed. Also, the number in the copy quantity display will be reset to
0.
MAKING COPIES
Using the RADF
USING THE RADF
OUTPUT
2-SIDED
COPY
AUTO
READY TO COPY.(DOCUMENT FEEDER MODE)
2-SIDED COPY
PRE-COUNT
EVEN NUMBER
ORIGINALS
ODD NUMBER
ORIGINALS
OK
AUTO
EXPOSURE
PAPER SELECT
100%
COPY RATIO
AUTO A4
Maximum height
line
line
READY TO COPY.(DOCUMENT FEEDER MODE)
2-SIDED COPY
PRE-COUNT
EVEN NUMBER
ORIGINALS
ODD NUMBER
ORIGINALS
OK
AUTO
EXPOSURE
PAPER SELECT
100%
COPY RATIO
AUTO A4
C
CA
CLEAR
INTERRUPT
CLEAR
ALL
1
2
3
4
5
6
7
8
9
0
P
C
CL
PROGRAM
AUDIT
INTE
CLE
AL
Click on the first or last page to see other AR-C150 (serv.man7) service manuals if exist.