Sharp AR-C150 (serv.man4) Service Manual ▷ View online
Note
Never set to another value than the specified value (de-
fault). (Otherwise, a trouble may occur.)
fault). (Otherwise, a trouble may occur.)
43 - 7
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to adjust the fusing oil supply amount. (Adjust-
ment of oil motor ON time and oil motor ON interval)
ment of oil motor ON time and oil motor ON interval)
Section
Fixing (Fusing)
Item
Operation
Operation/
Procedure
Procedure
1. Select the adjustment item with [
↑
], [
↓
] keys.
A: ON-TIME
Fusing oil pump ON time [ms]
B: CTRL-CYCLE
Fusing oil pump control cycle [ms]
2. Enter the set value with the 10-key.
3. Press the [OK] key.
When the [EXECUTE] key is pressed, it is highlighted and the
pump is operated with the set content.
When the [EXECUTE] key is pressed again, the display returns
to the normal display and the pump is stopped.
pump is operated with the set content.
When the [EXECUTE] key is pressed again, the display returns
to the normal display and the pump is stopped.
Range [ms]
Default value
ON-TIME
5 – 50
12
CTRL-CYCLE
17 – 250
130
(Example) When ON-TIME is 12ms and CTRL-CYCLE is 250ms,
12ms of ON and (250+50) – 12ms of OFF are re-
peated.
peated.
Default
A: ON-TIME
12 [ms]
B: CTRL-CYCLE
130 [ms]
When installing (replacing) this pump, set the pump operation
value of Sim 43-7 referring to the marking color shown in the illus-
tration below.
value of Sim 43-7 referring to the marking color shown in the illus-
tration below.
Marking color
Setting of simulation 43-7
A
B
Blue
12
80
Red
12
180
None
12
130
44
44 - 4
Purpose
Setting
Function
(Purpose)
(Purpose)
Used to set the target image (reference) density level in
correction (process correction) operations in the image
forming section.
correction (process correction) operations in the image
forming section.
Section
Image process (Photoconductor/Developing/Transfer/
Cleaning)
Cleaning)
Item
Picture quality
Density
Operation/
Procedure
Procedure
1. Select the adjustment item with [
↑
], [
↓
] keys.
2. Enter the set value with 10-key.
(255 levels)
3. Press the [OK] key. (The value entered in procedure 2 is set.)
Default value
Color sensor adjustment
reference level
Color sensor adjustment
reference level
PCS_C_TARGET_ID
102
Black sensor adjustment
reference level
reference level
PCS_B_TARGET_ID
133
Yellow reference density
level
level
Y_PAT_TARGET_ID
90
Magenta reference
density level
density level
M_PAT_TARGET_ID
100
Cyan reference density
level
level
C_PAT_TARGET_ID
83
Black reference density
level
level
K_PAT_TARGET_ID
15
(AR-C100/C150)
Black reference density
level
level
K_PAT_TARGET_ID
22
(AR-C250/C160/
C270)
Marking
8 – 18
44 - 9
Purpose
Operation data output/Check (Display/Print)
Function
(Purpose)
(Purpose)
Used to check the data on the image forming section
correction (process correction) (corrected main charger
grid voltage, the developing bias voltage, the laser
power, etc, in each print mode). (This simulation allows
to check if the correction operation is performed nor-
mally.)
correction (process correction) (corrected main charger
grid voltage, the developing bias voltage, the laser
power, etc, in each print mode). (This simulation allows
to check if the correction operation is performed nor-
mally.)
Section
Image process (Photoconductor/Developing/Transfer/
Cleaning)
Cleaning)
Item
Data
Operation data
(Machine condition)
(Machine condition)
Operation/
Procedure
Procedure
1. By scrolling with [
↑
], [
↓
] keys, each data of the im-
age forming section correction result.
The greater the difference between the initial value and the
current value is, the greater the correction quantity is judged as.
current value is, the greater the correction quantity is judged as.
This leads to a supposition that the conditions of consumable
parts such as developer and photoconductor may have been
degraded.
parts such as developer and photoconductor may have been
degraded.
Page 1 – 3 G, B, DV and initial set value in each mode stored in
process control
Page 4 Rotating time and the mark number of each drum
Page 5 Rotating time of each developing unit
Page 6 Humidity environment area (For transfer correction/hu-
midity correction)
[Content]
Process control mode output
Black
GB current value/GB initial value
Cyan
GB current value/GB initial value
Magenta
GB current value/GB initial value
Yellow
GB current value/GB initial value
Black
DV current value/DV initial value
Cyan
DV current value/DV initial value
Magenta
DV current value/DV initial value
Yellow
DV current value/DV initial value
[Content]
Normal mode output
Black
GB current value/GB initial value
Cyan
GB current value/GB initial value
Magenta
GB current value/GB initial value
Yellow
GB current value/GB initial value
Black
DV current value/DV initial value
Cyan
DV current value/DV initial value
Magenta
DV current value/DV initial value
Yellow
DV current value/DV initial value
BLACK_H1: (AR-C160/C270)
[Content]
Toner save mode output
Black
GB current value/GB initial value
Black
DV current value/DV initial value
BLACK_H1: (AR-C160/C270)
[Content]
Drum data
Black
Drum rotation (hour)
Drum rotation (sec)
Cyan
Drum rotation (hour)
Drum rotation (sec)
Magenta
Drum rotation (hour)
Drum rotation (sec)
Yellow
Drum rotation (hour)
Drum rotation (sec)
[Content]
Developer counter
Black
Developer operating
rotation (hour)
rotation (hour)
Developer operating
rotation sec/Previous count
up time (sec)
rotation sec/Previous count
up time (sec)
Cyan
Developer operating
rotation (hour)
rotation (hour)
Developer operating
rotation sec/Previous count
up time (sec)
rotation sec/Previous count
up time (sec)
Magenta
Developer operating
rotation (hour)
rotation (hour)
Developer operating
rotation sec/Previous count
up time (sec)
rotation sec/Previous count
up time (sec)
Yellow
Developer operating
rotation (hour)
rotation (hour)
Developer operating
rotation sec/Previous count
up time (sec)
rotation sec/Previous count
up time (sec)
8 – 19
[Content]
Humidity environment area
Humidity
correction present area
Humidity
Initial area (Toner density ADJ)
Transfer
correction present area
RRM speed correction correction present area
46
46 - 10
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to set the copy color balance (gamma for each
color). (Color/Text Photo mode). (AR-C100/C150)
Used to adjust the copy color balance (gamma for each
color). (Color/Copy document mode) (AR-C250/C160/
C270)
color). (Color/Text Photo mode). (AR-C100/C150)
Used to adjust the copy color balance (gamma for each
color). (Color/Copy document mode) (AR-C250/C160/
C270)
Section
ICU
Item
Picture quality
Color balance
Operation/
Procedure
Procedure
1. Select the color to be adjusted with the color keys
(K, C, M, Y).
2. Select the adjustment point with [
↑
], [
↓
] keys.
3. Enter the adjustment value of the selected point with the 10-
key.
4. Press the [OK] key.
(The entered value is set.)
(AR-C100/C150)
<SIM46-10 Data detail>
Disp
PosNo.
Disp
Chara
Default
Value
Min
Value
Max
Value
Contents
A
POINT1
500
245
755
Half tone reference
correction table S46
correction quantity:
black density 0 for
text/Printed photo
correction table S46
correction quantity:
black density 0 for
text/Printed photo
↓
↓
↓
↓
↓
↓
O
POINT15
500
245
755
Half tone reference
correction table S46
correction quantity:
black density 14 for
text/Printed photo
correction table S46
correction quantity:
black density 14 for
text/Printed photo
A
POINT1
500
245
755
Half tone reference
correction table S46
correction quantity:
cyan density 0 for
text/Printed photo
correction table S46
correction quantity:
cyan density 0 for
text/Printed photo
↓
↓
↓
↓
↓
↓
O
POINT15
500
245
755
Half tone reference
correction table S46
correction quantity:
cyan density 14 for
text/Printed photo
correction table S46
correction quantity:
cyan density 14 for
text/Printed photo
Disp
PosNo.
Disp
Chara
Default
Value
Min
Value
Max
Value
Contents
A
POINT1
500
245
755
Half tone reference
correction table S46
correction quantity:
magenta density 0 for
text/Printed photo
correction table S46
correction quantity:
magenta density 0 for
text/Printed photo
↓
↓
↓
↓
↓
↓
O
POINT15
500
245
755
Half tone reference
correction table S46
correction quantity:
magenta density 14
for text/Printed photo
correction table S46
correction quantity:
magenta density 14
for text/Printed photo
A
POINT1
500
245
755
Half tone reference
correction table S46
correction quantity:
yellow density 0 for
text/Printed photo
correction table S46
correction quantity:
yellow density 0 for
text/Printed photo
↓
↓
↓
↓
↓
↓
O
POINT15
500
245
755
Half tone reference
correction table S46
correction quantity:
yellow density 14 for
text/Printed photo
correction table S46
correction quantity:
yellow density 14 for
text/Printed photo
(AR-C250)
<SIM46-10 Data detail>
Disp
PosNo.
Disp
Chara
Default
Value
Min
Value
Max
Value
Contents
A
POINT1
500
245
755
Half tone reference
correction table S46
correction quantity:
Copy document mode
black density 0
correction table S46
correction quantity:
Copy document mode
black density 0
↓
↓
↓
↓
↓
↓
O
POINT15
500
245
755
Half tone reference
correction table S46
correction quantity:
Copy document mode
black density 14
correction table S46
correction quantity:
Copy document mode
black density 14
A
POINT1
500
245
755
Half tone reference
correction table S46
correction quantity:
Copy document mode
cyan density 0
correction table S46
correction quantity:
Copy document mode
cyan density 0
↓
↓
↓
↓
↓
↓
O
POINT15
500
245
755
Half tone reference
correction table S46
correction quantity:
Copy document mode
cyan density 14
correction table S46
correction quantity:
Copy document mode
cyan density 14
8 – 20
Disp
PosNo.
Disp
Chara
Default
Value
Min
Value
Max
Value
Contents
A
POINT1
500
245
755
Half tone reference
correction table S46
correction quantity:
Copy document mode
magenta density 0
correction table S46
correction quantity:
Copy document mode
magenta density 0
↓
↓
↓
↓
↓
↓
O
POINT15
500
245
755
Half tone reference
correction table S46
correction quantity:
Copy document mode
magenta density 14
correction table S46
correction quantity:
Copy document mode
magenta density 14
A
POINT1
500
245
755
Half tone reference
correction table S46
correction quantity:
Copy document mode
yellow density 0
correction table S46
correction quantity:
Copy document mode
yellow density 0
↓
↓
↓
↓
↓
↓
O
POINT15
500
245
755
Half tone reference
correction table S46
correction quantity:
Copy document mode
yellow density 14
correction table S46
correction quantity:
Copy document mode
yellow density 14
(AR-C160/C270)
<SIM46-10 Data detail>
Disp
PosNo.
Disp
Chara
Default
Value
Min
Value
Max
Value
Contents
A
POINT1
500
1
999
Half tone reference
correction table S46
correction quantity:
Copy document mode
black density 0
correction table S46
correction quantity:
Copy document mode
black density 0
↓
↓
↓
↓
↓
↓
O
POINT15
500
1
999
Half tone reference
correction table S46
correction quantity:
Copy document mode
black density 14
correction table S46
correction quantity:
Copy document mode
black density 14
A
POINT1
500
1
999
Half tone reference
correction table S46
correction quantity:
Copy document mode
cyan density 0
correction table S46
correction quantity:
Copy document mode
cyan density 0
↓
↓
↓
↓
↓
↓
O
POINT15
500
1
999
Half tone reference
correction table S46
correction quantity:
Copy document mode
cyan density 14
correction table S46
correction quantity:
Copy document mode
cyan density 14
Disp
PosNo.
Disp
Chara
Default
Value
Min
Value
Max
Value
Contents
A
POINT1
500
1
999
Half tone reference
correction table S46
correction quantity:
Copy document mode
magenta density 0
correction table S46
correction quantity:
Copy document mode
magenta density 0
↓
↓
↓
↓
↓
↓
O
POINT15
500
1
999
Half tone reference
correction table S46
correction quantity:
Copy document mode
magenta density 14
correction table S46
correction quantity:
Copy document mode
magenta density 14
A
POINT1
500
1
999
Half tone reference
correction table S46
correction quantity:
Copy document mode
yellow density 0
correction table S46
correction quantity:
Copy document mode
yellow density 0
↓
↓
↓
↓
↓
↓
O
POINT15
500
1
999
Half tone reference
correction table S46
correction quantity:
Copy document mode
yellow density 14
correction table S46
correction quantity:
Copy document mode
yellow density 14
46 - 11
Purpose
Adjustment
Function
(Purpose)
(Purpose)
Used to set the copy color balance (gamma for each
color). (Color/Text mode) (AR-C150/C250/C160/C270)
color). (Color/Text mode) (AR-C150/C250/C160/C270)
Section
ICU
Item
Picture quality
Color balance
Operation/
Procedure
Procedure
1. Select the color to be adjusted with the color keys
(K, C, M, Y).
2. Select the adjustment point with [
↑
], [
↓
] keys.
3. Enter the adjustment value of the selected point with the 10-
key.
4. Press the [OK] key.
(The entered value 2 is set.)
(AR-C150/C250)
<SIM46-11 Data detail>
Disp
PosNo.
Disp
Chara
Default
Value
Min
Value
Max
Value
Contents
A
POINT1
500
245
755
Half tone reference
correction table S46
correction quantity:
black density 0 for text
correction table S46
correction quantity:
black density 0 for text
↓
↓
↓
↓
↓
↓
O
POINT15
500
245
755
Half tone reference
correction table S46
correction quantity:
black density 14 for
text
correction table S46
correction quantity:
black density 14 for
text
8 – 21
Click on the first or last page to see other AR-C150 (serv.man4) service manuals if exist.