Sharp AR-810 (serv.man4) Service Manual ▷ View online
2 - 29 AR-651/810 ERROR CODES AND SELF-DIAGNOSIS
Operation
procedure
Adjustment mode (05)
Accept-
Code
Items to adjust
Function Default
able
Contents
value
570
571
572
593
594
595
620
594
595
620
621
622
648
657
658
Range correction on Photo/Text
original manually set
on the original glass
original manually set
on the original glass
Photo
Text
Gamma data
Photo/Text
slope adjustment
Photo
Text
Text
Sharpness
Photo/Text
adjustment
Photo
Text
Adjustment of
Photo/Text
blurred/thin
spotted text
spotted text
Normal
Toner save
PPC
JPN:44 11~14,
UC,
21~24,
EUR:12 31~34,
41~44
PPC
12
PPC
44
PPC
0
0~9
PPC
0
0~9
PPC
0
0~9
PPC
JPN:1
0~99
UC:31
EUR:31
PPC
2
0~99
PPC
5
0~99
PPC
JPN:152 0~255
UC:30
EUR:30
PRT
4
0~9
PRT
6
0~9
Set whether the value of the
background peak and text peak
are fixed or not. One’s place is an
adjustment for “automatic
densitiy” and ten’s place is one
for “manual density”. If they are
fixed, the range correction is
performed with standard values.
The values of the background
peak and text peak affect the
reproduction of the background
density and text density respec-
tively.
background peak and text peak
are fixed or not. One’s place is an
adjustment for “automatic
densitiy” and ten’s place is one
for “manual density”. If they are
fixed, the range correction is
performed with standard values.
The values of the background
peak and text peak affect the
reproduction of the background
density and text density respec-
tively.
Background peak
Text peak
1:
fixed
fixed
2:
varied
fixed
3:
fixed
varied
4:
varied
varied
When the value increases,
the image becomes darker.
the image becomes darker.
The number of units: Enter one of
the following fixed values in the
copying mode.
1: Text/Photo 2: Photo 5: Text
The number of tens: intensity
0: default value
1 to 9: when the value increases,
the image becomes sharper.
• In case of Text/Photo mode
the following fixed values in the
copying mode.
1: Text/Photo 2: Photo 5: Text
The number of tens: intensity
0: default value
1 to 9: when the value increases,
the image becomes sharper.
• In case of Text/Photo mode
(code 620),
2 1
2 1
Fixed value for the Text/
Photo mode
Enter a number (0 to 9)
Photo mode
Enter a number (0 to 9)
Adjustment of the blurred/thin
spotted text
05-648: With increasing the
value, the thin spotted text is
suppressed, and with decreasing
it, the blurred text is suppressed.
05-657, 658: With decreasing the
value, the thin spotted text is
suppressed, and with increasing
it, the blurred text is suppressed.
spotted text
05-648: With increasing the
value, the thin spotted text is
suppressed, and with decreasing
it, the blurred text is suppressed.
05-657, 658: With decreasing the
value, the thin spotted text is
suppressed, and with increasing
it, the blurred text is suppressed.
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
AR-651/810 ERROR CODES AND SELF-DIAGNOSIS 2 - 30
Operation
procedure
Adjustment mode (05)
Accept-
Code
Items to adjust
Function Default
able
Contents
value
672-0
672-1
672-2
672-3
672-4
673-0
673-1
673-2
673-3
673-4
676-0
676-1
676-2
676-3
676-4
677-0
677-1
677-2
677-3
677-4
672-1
672-2
672-3
672-4
673-0
673-1
673-2
673-3
673-4
676-0
676-1
676-2
676-3
676-4
677-0
677-1
677-2
677-3
677-4
693
694
695
Adjustment of
Normal
printer image
density
density
Toner save
Range correction
Photo/Text
on original set on
the RADF
the RADF
Photo
Text
PRT
0
0~10
PRT
4
0~10
PRT
5
0~10
PRT
6
0~10
PRT
10
0~10
PRT
0
0~10
PRT
4
0~10
PRT
5
0~10
PRT
6
0~10
PRT
10
0~10
PRT
0
0~10
PRT
4
0~10
PRT
5
0~10
PRT
6
0~10
PRT
10
0~10
PRT
0
0~10
PRT
4
0~10
PRT
5
0~10
PRT
6
0~10
PRT
10
0~10
PPC
JPN:44 11~14,
UC,
21~24,
EUR:12 31~34,
41~44
PPC
12
PPC
44
Adjustment of the image density.
With decreasing the value, the
text becomes lighter.
With decreasing the value, the
text becomes lighter.
Set whether the value of the
background peak and text peak
are fixed or not. One’s place is an
adjustment for “automatic
density” and ten’s place is one for
“manual density”.
If they are fixed, the range
correction is performed with
standard values.
The values of the background
peak and text peak affect the
reproduction of the background
density and text density respec-
tively.
background peak and text peak
are fixed or not. One’s place is an
adjustment for “automatic
density” and ten’s place is one for
“manual density”.
If they are fixed, the range
correction is performed with
standard values.
The values of the background
peak and text peak affect the
reproduction of the background
density and text density respec-
tively.
Background peak
Text peak
1:
fixed
fixed
2:
varied
fixed
3:
fixed
varied
4:
varied
varied
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
1
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
1
1
1
2 - 31 AR-651/810 ERROR CODES AND SELF-DIAGNOSIS
2. 2. 5. Setting mode (08)
The items in the setting code list can be set or changed in this setting mode (08).
Procedure 1
Procedure 2
Procedure 3
[0] [8]
[POWER]
[Digital key]
(Code)
[CLEAR]
(Corrects value)
[SET]
or
[INTERRUPT]
[POWER] OFF/ON
(Exit)
[START]
[CANCEL]
[Digital key]
or
[Select icon]
Sets or
changes value
(Stores value in RAM)
[0] [8]
[POWER]
[Digital key]
(Code)
[START]
[SET]
or
[INTERRUPT]
Adjustment value
cannot be changed
[POWER] OFF/ON
(Exit)
[0] [8]
[POWER]
[Digital key]
(Code)
[CANCEL]
[START]
[Digital key]
(1st setting)
(1st setting)
[CLEAR]
(Corrects value)
[START]
[Digital key]
(2nd setting)
[SET]
or
[INTERRUPT]
(Stores value in RAM)
[CLEAR]
(Corrects value)
[POWER]
OFF/ON
(Exit)
AR-651/810 ERROR CODES AND SELF-DIAGNOSIS 2 - 32
200
201
202
203
204
205
206
210
211
213
214
215
Date and time setting
Destination selection
Setting for externally in-
stalled copy counter
stalled copy counter
Line adjustment mode
Auto clear timer setting
Energy saver timer set-
ting
ting
Auto-power off timer set-
ting
ting
Punch setting to the tab
paper
paper
Inserter/
Reverse setting when
inserting the back cover
Reverse setting when
inserting the back cover
Reversal exit setting at
SADF - single-sided
copying
SADF - single-sided
copying
Tab paper printing/
tab extension setting
(2nd cassette feeding)
Tab paper printing/
tab shift setting (2nd
cassette feeding)
tab extension setting
(2nd cassette feeding)
Tab paper printing/
tab shift setting (2nd
cassette feeding)
ALL
–
13 digits
ALL
0:EUR
0~2
1:UC
2:JPN
ALL
0
0~3
ALL
0
0~1
ALL
3
0~10
ALL
11
0, 11~15
ALL
12
5~20
ALL
0
0~1
PPC
0
0~1
PPC
0
0~1
PPC
130
120~170
PPC
130
0~300
Year /month /date /day /hour /minute /second Ex-
ample: 02 06 01 5 13 27 49
0:EUR
ample: 02 06 01 5 13 27 49
0:EUR
1:UC
2:JPN
0: External copy counter not used
1: Coin controller
2: Copy key card
3: Key copy counter
0: For factory shipment
1: Coin controller
2: Copy key card
3: Key copy counter
0: For factory shipment
1: For line
*Field: ‘0' must be selected
*Need to be checked when K-SRAM
was changed.
Timer to return the machine to the default
settings when the [START] key is not
pressed after the function and mode were
set
0: Max. (150 sec.)
1 to 10: Set number X 15 sec.
Timer to automatically switch to the en-
ergy saving mode when the copier has
not been used
0: Disabled 11: 15min. 12: 20min.
13: 30min. 14: 45min. 15: 60min.
Timer to automatically turn OFF the power
when the copier has not been used
5: 25min. 6: 30min. 7. 40min 8. 50min.
9: 60min. 10: 70min. 11. 80min.
12. 90min. 13. 100min. 14. 110min.
15. 120min. 16. 150min 17. 180min.
18. 210min. 19. 240min. 20. Not used
Setting of whether or not punching the
tab paper when both the tab and hole
punch functions are selected
0: No punch 1: Punch set
Setting of whether or not to reverse only
the back cover when inserting the back
cover at the inserter function
0: No reverse 1: Reverse set
Setting of whether or not to discharge
paper without reversing it when carrying
out a single-sided copying at SADF
0: Invalid (reversing)
1: Valid (no reversing)
Setting of the initial value for the tab
extension at the tab printing mode by
0.1mm
Setting of the initial value for the shift
amount at the tab printing mode by
0.1mm
*Need to be checked when K-SRAM
was changed.
Timer to return the machine to the default
settings when the [START] key is not
pressed after the function and mode were
set
0: Max. (150 sec.)
1 to 10: Set number X 15 sec.
Timer to automatically switch to the en-
ergy saving mode when the copier has
not been used
0: Disabled 11: 15min. 12: 20min.
13: 30min. 14: 45min. 15: 60min.
Timer to automatically turn OFF the power
when the copier has not been used
5: 25min. 6: 30min. 7. 40min 8. 50min.
9: 60min. 10: 70min. 11. 80min.
12. 90min. 13. 100min. 14. 110min.
15. 120min. 16. 150min 17. 180min.
18. 210min. 19. 240min. 20. Not used
Setting of whether or not punching the
tab paper when both the tab and hole
punch functions are selected
0: No punch 1: Punch set
Setting of whether or not to reverse only
the back cover when inserting the back
cover at the inserter function
0: No reverse 1: Reverse set
Setting of whether or not to discharge
paper without reversing it when carrying
out a single-sided copying at SADF
0: Invalid (reversing)
1: Valid (no reversing)
Setting of the initial value for the tab
extension at the tab printing mode by
0.1mm
Setting of the initial value for the shift
amount at the tab printing mode by
0.1mm
1
1
1
1
1
1
1
1
1
1
1
1
Setting mode (08)
Acceptable
Operation
Value
procedure
Code
Name
Function Default
Contents
Click on the first or last page to see other AR-810 (serv.man4) service manuals if exist.