Sharp AR-507 (serv.man4) Service Manual ▷ View online
[3] CONSUMABLE PARTS (AR-287/337/407)
1. Consumable Parts List
A. USA
AR-287/337
No.
ITEM
CONTENTS
LIFE
MODEL NAME
REMARKS
5
Lower Heat Roller Kit
Lower Heat Roller
Fusing Separation Pawl (lower)
Fusing Separation Pawl (lower)
´
1
´
2
160K
AR-505LH
Replacement of fusing separation pawl for every 90
K should be done using those supplied separately.
K should be done using those supplied separately.
12
Lower Heat Roller
Lower Heat Roller
´
1
160K
AR-505HR
AR-407
No.
ITEM
CONTENTS
LIFE
MODEL NAME
REMARKS
5
Lower Heat Roller Kit
Lower Heat Roller
Fusing Separation Pawl (lower)
Fusing Separation Pawl (lower)
´
1
´
2
180K
AR-505LH
Replacement of fusing separation pawl for every 90
K should be done using those supplied separately.
K should be done using those supplied separately.
12
Lower Heat Roller
Lower Heat Roller
´
1
180K
AR-505HR
B. Canada
AR-287/337
No.
ITEM
CONTENTS
LIFE
MODEL NAME
REMARKS
5
160K PM Kit
Upper Heat Roller
Lower Heat Roller
Toner Receiving Seal
DV Seal
Heat Roller Gear
Lower Heat Roller
Toner Receiving Seal
DV Seal
Heat Roller Gear
´
1
´
1
´
1
´
1
´
1
160K
AR-337KB
12
Lower Heat Roller
Lower Heat Roller
´
1
160K
AR-505HR
AR-407
No.
ITEM
CONTENTS
LIFE
MODEL NAME
REMARKS
5
180K PM Kit
Upper Heat Roller
Lower Heat Roller
Toner Receiving Seal
DV Seal
Heat Roller Gear
Lower Heat Roller
Toner Receiving Seal
DV Seal
Heat Roller Gear
´
1
´
1
´
1
´
1
´
1
180K
AR-337KB
12
Lower Heat Roller
Lower Heat Roller
´
1
180K
AR-505HR
C. Europe / U.K. / Australia / New Zealand
AR-287/337
No.
ITEM
CONTENTS
LIFE
MODEL NAME
REMARKS
5
160K PM Kit
Upper Heat Roller
Lower Heat Roller
Toner Receiving Seal
DV Seal
Heat Roller Gear
Lower Heat Roller
Toner Receiving Seal
DV Seal
Heat Roller Gear
´
1
´
1
´
1
´
1
´
1
160K
AR-337KB
12
Lower Heat Roller
Lower Heat Roller
´
1
160K
AR-505HR
AR-407
No.
ITEM
CONTENTS
LIFE
MODEL NAME
REMARKS
5
180K PM Kit
Upper Heat Roller
Lower Heat Roller
Toner Receiving Seal
DV Seal
Heat Roller Gear
Lower Heat Roller
Toner Receiving Seal
DV Seal
Heat Roller Gear
´
1
´
1
´
1
´
1
´
1
180K
AR-407KB
12
Lower Heat Roller
Lower Heat Roller
´
1
180K
AR-505HR
D. Asia / Middle & South America
AR-287/337
No.
ITEM
CONTENTS
LIFE
MODEL NAME
REMARKS
5
160K PM Kit
Upper Heat Roller
Lower Heat Roller
Toner Receiving Seal
DV Seal
Heat Roller Gear
Lower Heat Roller
Toner Receiving Seal
DV Seal
Heat Roller Gear
´
1
´
1
´
1
´
1
´
1
160K
AR-337KB
12
Lower Heat Roller
Lower Heat Roller
´
1
160K
AR-505HR
AR-407
No.
ITEM
CONTENTS
LIFE
MODEL NAME
REMARKS
5
180K PM Kit (200V)
Upper Heat Roller
Lower Heat Roller
Toner Receiving Seal
DV Seal
Heat Roller Gear
Lower Heat Roller
Toner Receiving Seal
DV Seal
Heat Roller Gear
´
1
´
1
´
1
´
1
´
1
180K
AR-407KB
12
Lower Heat Roller
Lower Heat Roller
´
1
180K
AR-505HR
AR-287/337
AR-407/507
3 – 8A
4/5/2000
E. Middle East / Africa
AR-287/337
No.
ITEM
CONTENTS
LIFE
MODEL NAME
REMARKS
5
160K PM Kit
Upper Heat Roller
Lower Heat Roller
Toner Receiving Seal
DV Seal
Heat Roller Gear
Lower Heat Roller
Toner Receiving Seal
DV Seal
Heat Roller Gear
´
1
´
1
´
1
´
1
´
1
160K
AR-337KB
12
Lower Heat Roller
Lower Heat Roller
´
1
160K
AR-505HR
AR-407
No.
ITEM
CONTENTS
LIFE
MODEL NAME
REMARKS
5
180K PM Kit
Upper Heat Roller
Lower Heat Roller
Toner Receiving Seal
DV Seal
Heat Roller Gear
Lower Heat Roller
Toner Receiving Seal
DV Seal
Heat Roller Gear
´
1
´
1
´
1
´
1
´
1
180K
AR-407KB
12
Lower Heat Roller
Lower Heat Roller
´
1
180K
AR-505HR
AR-287/337
AR-407/507
4/5/2000
3 – 9A
[7] SIMULATION
(AR-287/337/AR-407/507)
B. List
Code
Function (Purpose)
Main
Sub
8
1
Used to check and adjust the operation of the developing bias
voltage in each print mode and the control circuit. (for OPC
drum type B)
voltage in each print mode and the control circuit. (for OPC
drum type B)
2
Used to check and adjust the operation of the main charger
grid voltage in each print mode and the control circuit. (for
OPC drum type B)
grid voltage in each print mode and the control circuit. (for
OPC drum type B)
6
Used to check and adjust the transfer charger current and the
control circuit.
control circuit.
7
Used to check and adjust the operation of the separation
charger voltage and its control circuit.
charger voltage and its control circuit.
22
1
Used to check the print out count of each section in each
operation mode.
(Used to check the maintenance timing.)
operation mode.
(Used to check the maintenance timing.)
6
Used to output the list of the setting and adjustment data
(simulations, counters).
(simulations, counters).
26
10
Used to allow entry of the software key input for the network
scanner.
scanner.
12
Used to enter the Diagnosis function key input.
13
After completion of copier job in copier interruption during a
printer job, the print job is resumed in synchronization with the
auto clear timer (key operation) setup time [10-240]. By
making the setup below, the print job is resumed in 0 sec.
(However, the auto clear function is enabled with the setup
time of key operation. Also, this simulation and auto clear are
not synchronized.)
printer job, the print job is resumed in synchronization with the
auto clear timer (key operation) setup time [10-240]. By
making the setup below, the print job is resumed in 0 sec.
(However, the auto clear function is enabled with the setup
time of key operation. Also, this simulation and auto clear are
not synchronized.)
22
Used to set the specification (language display) for the
destination. (Excluding the Japan models.)
destination. (Excluding the Japan models.)
32
When the variable speed fan motor is in the ready state and
the process temperature is in the range of 36° – 45°, the
PWM duty is set in percentage.
the process temperature is in the range of 36° – 45°, the
PWM duty is set in percentage.
44
Used to set the model of the unit which is connected to the
SCSI I/F of ICU PWB.
SCSI I/F of ICU PWB.
52
Used to set whether white paper discharge count up is
performed or not.
("White paper" means insertion paper in the OHP insertion
paper mode (without copy), cover paper in the cover paper
insertion mode (without copy)/back cover, and white paper in
the duplex exit mode (CA etc.).)
performed or not.
("White paper" means insertion paper in the OHP insertion
paper mode (without copy), cover paper in the cover paper
insertion mode (without copy)/back cover, and white paper in
the duplex exit mode (CA etc.).)
50
1
Used to adjust the copy image position and the void area
(image loss) on the print paper in the copy mode. (The same
adjustment can be made with SIM 50-2 (simple method).)
(image loss) on the print paper in the copy mode. (The same
adjustment can be made with SIM 50-2 (simple method).)
2
Used to adjust the copy image position and the void area
(image loss) on the print paper in the copy mode. (Simple
adjustment)
(This simulation allows the same simulation with SIM 50-1
more simply. )
(image loss) on the print paper in the copy mode. (Simple
adjustment)
(This simulation allows the same simulation with SIM 50-1
more simply. )
26
Used to set the folding margin of center binding.
51
3
Used to set the clutch OFF time. (AR-507 Europe and U.K.
only)
only)
61
2
Used to adjust the scanner (exposure) laser power (absolute
value) in the copy mode.
value) in the copy mode.
4
Used to adjust the scanner (exposure) laser power (absolute
value) in the printer mode. (For Photoconductor type B)
value) in the printer mode. (For Photoconductor type B)
67
18
Used to clear the application data area of the Network
Scanner of the Flash ROM.
Scanner of the Flash ROM.
C. Details of simulations
8
8 - 1
Purpose
Adjustment/Operation test/check
Function
(Purpose)
(Purpose)
Used to check the operation of the developing bias volt-
age in each print mode and its control circuit. (For OPC
drum type B)
age in each print mode and its control circuit. (For OPC
drum type B)
Section
Process (OPC drum, developing unit, transfer,
cleaning) section
cleaning) section
Operation/
Procedure
Procedure
(The developing bias output voltage of each print mode
can be adjusted and checked.)
can be adjusted and checked.)
1. Select the print mode with [
] key and [
¯
] key.
2. Enter the adjustment value with the 10-key pad.
3. Press the [EXECUTE] key.
The [EXECUTE] key is highlighted, the adjustment value entered in
procedure 2 is set, and the voltage corresponding to the set value is
supplied.
After supplying the voltage for 30 sec, the [EXECUTE] key returns to
the normal display.
If the [EXECUTE] key is pressed while the voltage is supplied, the
voltage output is stopped and the [EXECUTE] key returns to the nor-
mal display.
procedure 2 is set, and the voltage corresponding to the set value is
supplied.
After supplying the voltage for 30 sec, the [EXECUTE] key returns to
the normal display.
If the [EXECUTE] key is pressed while the voltage is supplied, the
voltage output is stopped and the [EXECUTE] key returns to the nor-
mal display.
AUTO
: Auto mode
* (500) (–500V
±
5V)
CHARA
: Character mode
* (500) (–500V
±
5V)
CHARA PHOTO : Character/Photo mode
* (500) (–500V
±
5V)
PHOTO
: Photo mode
* (500) (–500V
±
5V)
PRINTER
: Printer mode
* (500) (–500V
±
5V)
PLUS
: Cleaning mode
Developing bias voltage
Developing bias voltage
* (150) (+150V
±
5V)
* ( ): Default
(AR-287/337/407)
(AR-507)
AUTO
: Auto mode
* (415) (–425V
±
5V)
CHARA
: Character mode
* (490) (–500V
±
5V)
CHARA PHOTO
: Character/Photo mode * (490) (–500V
±
5V)
PHOTO
: Photo mode
* (490) (–500V
±
5V)
PRINTER
: Printer mode
* (490) (–500V
±
5V)
PLUS
: Cleaning mode
Developing bias voltage
Developing bias voltage
* (165) (+150V
±
5V)
* ( ): Default
AR-287/337
AR-407/507
7 – 51
4/5/2000
8 - 2
Purpose
Adjustment/Operation test/check
Function
(Purpose)
(Purpose)
Used to check and adjust the operation of the main
charger grid voltage in each print mode and the control
circuit. (for OPC drum type B)
charger grid voltage in each print mode and the control
circuit. (for OPC drum type B)
Section
Image process (Photoconductor/Developing/Transfer/
Cleaning)
Cleaning)
Operation/
Procedure
Procedure
(The charging/grid output voltage in each print mode
can be adjusted and checked.)
can be adjusted and checked.)
1. Select the print mode with [
] key and [
¯
]key.
2. Enter the adjustment value with the 10-key pad.
3. Press the [EXECUTE] key.
The [EXECUTE] key is highlighted, the adjustment value entered in
procedure 2 is set, and the voltage corresponding to the set value is
supplied.
procedure 2 is set, and the voltage corresponding to the set value is
supplied.
After supplying the voltage for 30 sec, the [EXECUTE] key returns to
the normal display.
the normal display.
If the [EXECUTE] key is pressed while the voltage is supplied, the
voltage output is stopped and the [EXECUTE] key returns to the nor-
mal display.
voltage output is stopped and the [EXECUTE] key returns to the nor-
mal display.
(AR-287/337/407)
AUTO
: Auto mode
* (602) (–603
±
5V)
CHARA
: Character mode
* (602) (–603
±
5V)
CHARA PHOTO
: Character/Photo mode * (602) (–603
±
5V)
PHOTO
: Photo mode
* (602) (–603
±
5V)
PRINTER
: Printer mode
* (602) (–603
±
5V)
* ( ): Default
(AR-507)
AUTO
: Auto mode
* (560) (–570
±
5V)
CHARA
: Character mode
* (635) (–645
±
5V)
CHARA PHOTO
: Character/Photo mode * (635) (–645
±
5V)
PHOTO
: Photo mode
* (635) (–645
±
5V)
PRINTER
: Printer mode
* (635) (–645
±
5V)
* ( ): Default
8 - 6
Purpose
Adjustment/Operation test/check
Function
(Purpose)
(Purpose)
Used to check and adjust the transfer charger current
and the control circuit.
and the control circuit.
Section
Image process
(Photoconductor/
Developing/Transfer/
Cleaning)
(Photoconductor/
Developing/Transfer/
Cleaning)
Copy
Operation/
Procedure
Procedure
The transfer charger output voltage in printing the front
and the back of paper can be adjusted and checked.
and the back of paper can be adjusted and checked.
1. Select the print mode with [
] key and [
¯
] key.
2. Enter the adjustment value with the 10-key pad.
3. Press the [EXECUTE] key.
The [EXECUTE] key is highlighted, the adjustment value entered in
procedure 2 is set, and the voltage corresponding to the set value is
supplied.
procedure 2 is set, and the voltage corresponding to the set value is
supplied.
After supplying the voltage for 30 sec, the [EXECUTE] key returns to
the normal display.
the normal display.
If the [EXECUTE] key is pressed while the voltage is supplied, the
voltage output is stopped and the [EXECUTE] key returns to the nor-
mal display.
voltage output is stopped and the [EXECUTE] key returns to the nor-
mal display.
FROMT MODE: Front surface print (with the paper feed tray and
manual paper feed tray)
BACK MODE: Back surface print (with duplex paper feed)
(AR-287/337)
(AR-407)
(AR-507)
AR-287/337
AR-407/507
4/5/2000
7 – 52
Click on the first or last page to see other AR-507 (serv.man4) service manuals if exist.