Sharp AR-336 (serv.man11) User Manual / Operation Manual ▷ View online
7-37
CHAPTER
7
DUAL TRAY OUTPUT UNIT
(
AR-TR1
)
This optional unit can deliver interrupt copies to the lower exit tray.
PART NAMES
Upper exit tray
(AR-TE1)
Lower exit tray
(AR-TE1)
Upper exit tray (First tray)
●
Ordinary (non-interrupt) copies are deposited in the upper exit tray.
Lower exit tray (Second tray)
●
Interrupt copies are deposited in the lower exit tray.
A key operator program can disable output to the lower exit tray in interrupt copying.
See page 8-26 for Enable / Disable setting.
A key operator program can disable output to the lower exit tray in interrupt copying.
See page 8-26 for Enable / Disable setting.
●
Be sure to extend the tray when feeding B4 or A3 (8-1/2"
x 14" or 11" x 17") sized paper.
x 14" or 11" x 17") sized paper.
OPTIONAL EQUIPMENT
Dual tray output unit (AR-TR1)
7-38
CHAPTER
7
OPTIONAL EQUIPMENT
Dual tray output unit (AR-TR1)
DUAL TRAY OUTPUT UNIT (AR-TR1)
Specifications
Exit tray capacity
Upper tray : 250 sheets
Lower tray : 100 sheets
Lower tray : 100 sheets
Paper size
Upper tray : A6 to A3 (5-1/2" x 8-1/2" to 11" x 17")
Lower tray : A5 to A3 (5-1/2" x 8-1/2" to 11" x 17")
Lower tray : A5 to A3 (5-1/2" x 8-1/2" to 11" x 17")
Paper weight
Upper tray : 52 to 128
g
/m
2
(14 lbs. to 34 lbs.)
Lower tray : 56 to 105
g
/m
2
(15 lbs. to 28 lbs.)
Power supply
Drawn from the copier
Weight
Approx. 3.3 k
g
(7.3 lbs.)
Specifications are subject to change for improvement without notice.
8-1
CHAPTER
8
CHAPTER 8
KEY OPERATOR’S GUIDE
This chapter contains information on all of the programs used by the
key operator. The programs allow the key operator to tailor many
functions of the AR-281/AR-286/AR-336 for specific modes of operation.
These programs can only be accessed after a key operator code
number has been entered.
Please familiarise yourself with this chapter and refer to it for the
information you need to keep the copier operating smoothly.
key operator. The programs allow the key operator to tailor many
functions of the AR-281/AR-286/AR-336 for specific modes of operation.
These programs can only be accessed after a key operator code
number has been entered.
Please familiarise yourself with this chapter and refer to it for the
information you need to keep the copier operating smoothly.
Page
●
●
●
●
●
KEY OPERATOR CODE NUMBER
.....................
8-2
●
Registering the key operator code number
...............
8-2
●
●
●
●
●
KEY OPERATOR PROGRAMS
........................
8-4
●
Using the key operator programs
......................
8-7
●
●
●
●
●
KEY OPERATOR ASSISTANCE CALL
.................
8-28
●
●
●
●
●
KEY OPERATOR CODE NUMBER:
FACTORY SETTING
...............................
8-29
8-2
CHAPTER
8
KEY OPERATOR CODE NUMBER
Registering the key operator code number
1
Press the CUSTOM SETTINGS (
) key.
2
Press the “KEY OPERATOR PROGRAMS” key on the
touch panel.
touch panel.
●
The following display will appear.
3
Enter your key operator code number using the 10-key
pad.
pad.
●
When registering the key operator code number for the first time,
enter the number that was set at the factory. (See page 8-29.)
enter the number that was set at the factory. (See page 8-29.)
●
As the code number is entered, the dashes in the display will
change to asterisks.
change to asterisks.
4
Press the “COPIER” key on the touch panel.
5
Press the “OTHER FUNCTION SETTINGS” key.
CUSTOM SETTINGS
AUTO
EXPOSURE
PAPER SELECT
100%
COPY RATIO
AUTO A4
EXIT
DISPLAY
CONTRAST
CONTRAST
KEY OPERATOR
PROGRAMS
KEY OPERATOR PROGRAMS
EXIT
COPIER
TOTAL COUNT.
PROGRAM LIST
PRINTOUT.
PRINTOUT.
COPIER
PDA/ZR
KEY OPERATOR PROGRAMS
COPIER MODE
OTHER FUNCTION
SETTINGS
SETTINGS
ENABLE/DISABLE
SETTINGS
SETTINGS
TIMER SETTINGS
ACCOUNT CONTROL
OK
KEY OPERATOR PROGRAMS
ENTER KEY OPERATOR CODE.
EXIT
KEY OPERATOR CODE
- - - - -
A key operator code number must be registered before a key operator
program can be used. The key operator must remember this number. Only
this registered number will allow access to the key operator programs.
program can be used. The key operator must remember this number. Only
this registered number will allow access to the key operator programs.
KEY OPERATOR’S GUIDE
Key operator code number
1
2
3
4
5
6
0
C
7
8
9
P
CLEAR
PROGRAM
AUDIT CLEAR
INTERRUPT
Click on the first or last page to see other AR-336 (serv.man11) service manuals if exist.