DOWNLOAD Sharp AR-286 (serv.man4) Service Manual ↓ Size: 236.01 KB | Pages: 8 in PDF or view online for FREE

Model
AR-286 (serv.man4)
Pages
8
Size
236.01 KB
Type
PDF
Document
Service Manual
Brand
Device
Copying Equipment / AR286 Service Manual
File
ar-286-sm4.pdf
Date
PREV: Sharp AR-286 (serv.man3) Service Manual

Sharp AR-286 (serv.man4) Service Manual ▷ View online

AR-281/285/336
2-tray paper exit unit (AR-281 only)
(AR-DU1)
AR-286/336
AR-281
Desk (AR-DD1)
Finisher
(AR-FN2)
Finisher
(AR-FN1)
Finisher
(AR-FN1N)
Dual tray output unit
(AR-TR1)
Exit tray
(AR-TE1)
Stand/500 sheet 
paper drawer
(AR-DE1)
Stand/500 sheet 
paper drawer
(AR-DE1N)
500-sheet paper drawer
(AR-CS1)
Large capacity
(AR-LC1)
· 
Printer expansion kit
(AR-PB2)
· 
NIC card (10 base T/2) (Provided by Europe)
(JX96NCE8)
· 
NIC card (10 base T/2) (Provided by local distributors)
(AR-NC1D)
· 
NIC card (10 base T / 100 base TX)
(AR-NC3D)
· 
AXIS fixing angle
(AXIS scanner)
· 
Mounting kit
(AR-XB3)
1 – 2
3/26/1999
AR-336
[8] SIMULATION
26 - 41
Purpose
Setting
Function
(Purpose)
Used to enable/disable the auto magnification ratio select (AMS) function in the pamphlet copy mode.
Section
Item
Specifications
Operation mode (Common)
Operation/
Procedure
This simulation is used to enable or disable the automatic magnification ratio selection (AMS) in the pamphlet mode.
Set value
Set content
0
Automatic magnification ratio selection (AMS) is
enabled. 
1
Automatic magnification ratio selection (AMS) is
disabled. 
Note
26 - 46
Purpose
Setting
Function
(Purpose)
Used to set the image direction or not regardless of modes when the finisher/sorter is installed.
Section
Item
Specifications
Operation mode (Common)
Operation/
Procedure
This simulation is used to set the image direction or not regardless of modes when the finisher/sorter is installed.
Set value
Set content
0
Not set. (The image direction is changed in the
staple mode of FN1
∗
.)
1
Set. (The image direction is not changed regardless
of presence of the staple.)
Default: 0
Note
3/26/1999
8 – 1
AR-336
(Danish)
ADVARSEL !
Lithiumbatteri – Eksplosionsfare ved fejlagtig håndtering.
Udskiftning må kun ske med batteri
af samme fabrikat og type.
Levér det brugte batteri tilbage til leverandoren.
(English)
Caution !
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type
recommended by the manufacturer.
Dispose of used batteries according to manufacturer’s instructions.
(Finnish)
VAROITUS
Paristo voi räjähtää, jos se on virheellisesti asennettu.
Vaihda paristo ainoastaan laitevalmistajan suosittelemaan
tyyppiin. Hävitä käytetty paristo valmistajan ohjeiden
mukaisesti.
(French)
ATTENTION
Il y a danger d’explosion s’ il y a remplacement incorrect
de la batterie. Remplacer uniquement avec une batterie du
même type ou d’un type équivalent recommandé par 
le constructeur.
Mettre au rebut les batteries usagées conformément aux
instructions du fabricant.
(Swedish)
VARNING
Explosionsfara vid felaktigt batteribyte.
Använd samma batterityp eller en ekvivalent
typ som rekommenderas av apparattillverkaren.
Kassera använt batteri enligt fabrikantens
instruktion.
CAUTION FOR BATTERY REPLACEMENT
AR-336
q
C
 1999 BY SHARP CORPORATION
Printed in Japan.
SHARP CORPORATION
Digital Document Systems Group
Quality & Reliability Control Center
Yamatokoriyama, Nara 639-1186, Japan
1999 April Printed in Japan
AR-336
Page of 8
Display

Sharp AR-286 (serv.man4) Service Manual ▷ Download

Found More:

AR-286 (serv.man4) Service Manuals

Preview DownloadPagesSize
AR-286 (serv.man3) AR250 286 336-Circuit Diagrams Service Manual 50 1.8 MB
AR-286 (serv.man7) AR286,336 Operation Manual-Section 1 User Manual / Operation Manual 34 2.61 MB
AR-286 (serv.man8) AR286,336 Operation Manual-Section 2 User Manual / Operation Manual 42 8.02 MB
AR-286 (serv.man9) AR286,336 Operation Manual-Section 3 User Manual / Operation Manual 32 1.05 MB
AR-286 (serv.man10) AR286,336 Operation Manual-Section 4 User Manual / Operation Manual 70 2.01 MB
AR-286 (serv.man5) Parts Guide AR250 280 285 287 335 337 405 407 505 507 Service Manual / Parts Guide 127 5.15 MB
AR-286 (serv.man6) AR286 Parts Guide Service Manual / Parts Guide 17 1017.08 KB
AR-286 (serv.man2) AR286,336 Specifications Service Manual / Specification 4 236.69 KB
AR-286 (serv.man18) Change of Fuser Cover Part Number. Service Manual / Technical Bulletin 1 25.47 KB
AR-286 (serv.man19) Improvement made to prevent fire hazard caused by imperfect contact on fixing junction PWB. Service Manual / Technical Bulletin 1 45.23 KB
AR-286 (serv.man20) Re issue bulletin regarding a parts change - mainly for the mirror mount fixing plate. Service Manual / Technical Bulletin 4 1.6 MB
AR-286 (serv.man21) Change to the paper feed roller material. Service Manual / Technical Bulletin 13 1.22 MB
AR-286 (serv.man22) Reduction of F2-00 error. (Toner supply error) Service Manual / Technical Bulletin 2 12.35 KB
AR-286 (serv.man23) New service part for repairing a broken ADU frame Service Manual / Technical Bulletin 2 239.04 KB
AR-286 (serv.man24) Parts change information Service Manual / Technical Bulletin 2 45.14 KB
AR-286 (serv.man25) Paper feed drive unit part change Service Manual / Technical Bulletin 1 30.01 KB
AR-286 (serv.man26) Corrections carried out in the parts guide (DV unit toner hopper) Service Manual / Technical Bulletin 2 91.79 KB
AR-286 (serv.man27) HV protect sheet addition Service Manual / Technical Bulletin 1 36.21 KB
AR-286 (serv.man28) Corrections made to a jamming error caused by the ADU transfer clutch dragging or slipping Service Manual / Technical Bulletin 1 42.95 KB
AR-286 (serv.man29) Establishment of the paper feeding drive clutch with mylar sheet attached as a service part Service Manual / Technical Bulletin 1 30.64 KB
AR-286 (serv.man30) Parts change information Service Manual / Technical Bulletin 1 30.59 KB
AR-286 (serv.man31) Notice of jam codes Service Manual / Technical Bulletin 3 58.34 KB
AR-286 (serv.man32) Supply of silicon oil used for cleaning the SPF glass to be carried out as a service part Service Manual / Technical Bulletin 1 30.82 KB
AR-286 (serv.man33) Copy paper jams caused by grease entering the internal section of the paper feeding drive clutch and supply of Harnari grease as a service part Service Manual / Technical Bulletin 1 34.6 KB
AR-286 (serv.man34) Corrections carried out in the parts guide Service Manual / Technical Bulletin 1 30.09 KB
AR-286 (serv.man35) Change carried out in the material of the reversion gate Service Manual / Technical Bulletin 1 29.83 KB
AR-286 (serv.man36) Establishment of the CG reverse roller shaft UN and the Reverse roller shaft UN in the 550 paper feeding unit as service parts Service Manual / Technical Bulletin 2 52.22 KB
AR-286 (serv.man37) Parts change information Service Manual / Technical Bulletin 4 140.66 KB
AR-286 (serv.man38) Correction carried out in the parts guide for the charger wire Service Manual / Technical Bulletin 1 19.23 KB
AR-286 (serv.man39) Part changes Service Manual / Technical Bulletin 1 33.25 KB
AR-286 (serv.man40) Improvement of paper jam udulation caused by hardening of the delivery roller Service Manual / Technical Bulletin 1 22.16 KB
AR-286 (serv.man41) Notice of jam cause codes Service Manual / Technical Bulletin 3 153.47 KB
AR-286 (serv.man42) Providing a caution label, as a service part, on adding toner Service Manual / Technical Bulletin 2 70.59 KB
AR-286 (serv.man43) Using the same hand-feed pick-up roller as the 550 paper-feeding unit Service Manual / Technical Bulletin 1 29.8 KB
AR-286 (serv.man44) Change of the cleaning blade Service Manual / Technical Bulletin 1 34.6 KB
AR-286 (serv.man45) Parts change information Service Manual / Technical Bulletin 1 30.88 KB
AR-286 (serv.man46) Parts change information Service Manual / Technical Bulletin 3 139.5 KB
AR-286 (serv.man47) Polygon motors for laser units. Service Manual / Technical Bulletin 1 20.7 KB
AR-286 (serv.man48) SIMM manufacturer change. Service Manual / Technical Bulletin 1 29.85 KB
AR-286 (serv.man49) Changes to polgyon motor indide LSU. Service Manual / Technical Bulletin 1 18.99 KB
AR-286 (serv.man50) Change to pulley fixing double-thread screw and discontinued M4 tap. Service Manual / Technical Bulletin 1 86.28 KB
AR-286 (serv.man51) Change carried out in the hopper seal of the developing tank. Service Manual / Technical Bulletin 6 214.21 KB
AR-286 (serv.man52) Change of parts used in 550 paper feeding unit. Service Manual / Technical Bulletin 2 124.04 KB
AR-286 (serv.man53) Problem with main drive unit paper feed clutch. Service Manual / Technical Bulletin 3 1.18 MB
AR-286 (serv.man54) Addition of explanatory label for lever operation and change of suction lift shaft. Service Manual / Technical Bulletin 1 121.18 KB
AR-286 (serv.man55) Measure to alleviate problems of disengagement of the side plate in the machine cassette unit. Service Manual / Technical Bulletin 2 125.24 KB
AR-286 (serv.man56) ICU PWB part number change. Service Manual / Technical Bulletin 1 75.04 KB
AR-286 (serv.man57) Action to alleviate problems of static electricity through the use of a plastic bag for the machine. Service Manual / Technical Bulletin 1 73.31 KB
AR-286 (serv.man58) Abnormal noise from process unit. Service Manual / Technical Bulletin 1 60.81 KB
AR-286 (serv.man59) Part change information. Service Manual / Technical Bulletin 2 160.4 KB
AR-286 (serv.man60) Unification of 200V series DC power. (WHITE) Service Manual / Technical Bulletin 2 92.05 KB
AR-286 (serv.man61) Change of supplier for sintered bearings. (WHITE) Service Manual / Technical Bulletin 4 189.05 KB
AR-286 (serv.man62) Change of touch panel. (WHITE) Service Manual / Technical Bulletin 1 87.17 KB
AR-286 (serv.man63) Increase in strength of ADU frame. (WHITE) Service Manual / Technical Bulletin 2 113.1 KB
AR-286 (serv.man64) Changes to the AR505 Service Manual and addition of jam cause codes. (WHITE) Service Manual / Technical Bulletin 5 324.21 KB
AR-286 (serv.man65) Change carried out in the original document detection photo sensor. (WHITE) Service Manual / Technical Bulletin 1 74.25 KB
AR-286 (serv.man66) Change carried out in the paper feeding drive frame and the transport clutch. (WHITE) Service Manual / Technical Bulletin 2 119.65 KB
AR-286 (serv.man67) Change carried out in the PS front roller bearing. (WHITE) Service Manual / Technical Bulletin 1 83.73 KB
AR-286 (serv.man68) Change carried out in the waste toner drive gear in the main drive unit. (WHITE) Service Manual / Technical Bulletin 1 83.65 KB
AR-286 (serv.man69) Change carried out in the maker of the table glass used in the RADF. (WHITE) Service Manual / Technical Bulletin 2 117.21 KB
AR-286 (serv.man70) Action to alleviate problems of dislocation of the disjunction arm in the ADU unit. (WHITE) Service Manual / Technical Bulletin 1 83.93 KB
AR-286 (serv.man71) Change carried out in the location of production of the LCU unit.(WHITE) Service Manual / Technical Bulletin 1 88.26 KB
AR-286 (serv.man72) Discontinuance of the adjustment plate in the CCD unit. (WHITE) Service Manual / Technical Bulletin 1 134.14 KB
AR-286 (serv.man73) Countermeasure against Z-folding and paper mis-feed. (WHITE) Service Manual / Technical Bulletin 4 552.38 KB
AR-286 (serv.man74) Change carried out in the attachment screws for the operation panel LCD. (WHITE) Service Manual / Technical Bulletin 1 136.99 KB
AR-286 (serv.man75) Change in shape of the TC holder R.(WHITE) Service Manual / Technical Bulletin 1 121.3 KB
AR-286 (serv.man76) Change carried out in the shape of the bushing and the attachment gear in the paper-feeding drive unit. (WHITE) Service Manual / Technical Bulletin 2 137.96 KB
AR-286 (serv.man77) Measure to improve the performance of the copy lamp. (WHITE) Service Manual / Technical Bulletin 1 114.9 KB
AR-286 (serv.man78) Discontinuance of the adjustment plate in the CCD unit. (WHITE) Service Manual / Technical Bulletin 1 139.88 KB
AR-286 (serv.man79) Report of flash memory version method. (WHITE) Service Manual / Technical Bulletin 3 131.14 KB
AR-286 (serv.man80) Marks on rear frame of copies, ghosting on rear frame of copies. (WHITE) Service Manual / Technical Bulletin 1 89.95 KB
AR-286 (serv.man81) Fixing ARPB2 F9 00 error messages. (WHITE) Service Manual / Technical Bulletin 2 97.18 KB
AR-286 (serv.man82) Corrections to the Service Manual. (WHITE) Service Manual / Technical Bulletin 3 181.97 KB
AR-286 (serv.man83) Change carried out in the synchronous detection PWB in the LSU. (WHITE) Service Manual / Technical Bulletin 1 95.5 KB
AR-286 (serv.man84) 1.Change carried ut in the stir plate of the developing tank unit. 2.Change carried out in the material used for the TX sheet in the toner hopper unit. (WHITE) Service Manual / Technical Bulletin 3 156.86 KB
AR-286 (serv.man85) Change Of Parts To Diminish The Noise From The Polygon Motor. (WHITE) Service Manual / Technical Bulletin 1 38.83 KB
AR-286 (serv.man86) 1.Change Carried Out In The Plastic Slider Washer In The ADU Unit. 2.Action To Alleviate Problems Of Static Electricity In The OP Control PWB Unit. (WHITE) Service Manual / Technical Bulletin 2 158.24 KB
AR-286 (serv.man87) Report Of Flash Memory Version Method. (WHITE) Service Manual / Technical Bulletin 2 125.33 KB
AR-286 (serv.man88) 1.Correction Of Screws In The Scanner Unit. 2.Addition Carried Out Of A Harness Protect Sheet S. (WHITE) Service Manual / Technical Bulletin 2 161.49 KB
AR-286 (serv.man89) Length Change Of SP Tube. (WHITE) Service Manual / Technical Bulletin 1 63.23 KB
AR-286 (serv.man90) 1.Change Of The ICU PWB Unit At EFI's Request. 2.Change Of The Touch Panel Manufacturer. 3.Change Of The Heat-resistant Clamp Fixing Screws In The Fusing Unit. 4.Change Of The Action Time Changing The ICU PWB Memory To SDRAM. (WHITE) Service Manual / Technical Bulletin 3 87.23 KB
AR-286 (serv.man91) Extension Of The Rib On The Rail Section Of The 550-Tray Case. (WHITE) Service Manual / Technical Bulletin 1 89.2 KB
AR-286 (serv.man92) Corrections Carried Out In The Pars Guide. (WHITE) Service Manual / Technical Bulletin 7 294.11 KB
AR-286 (serv.man93) 1.Increase Of The DC Power Supply Capacity. 2.Change Of The Memory On The ICU PWB To SDRAM. 3.Change Of The Installation Procedure Manual And Addition Of A Wire Saddle. (WHITE) Service Manual / Technical Bulletin 2 109.27 KB
AR-286 (serv.man94) 1.Satisfaction Of the Argentine Safety Standard. 2.Increase Of Strength Of The Boss On The Right End Of The RSPF Base. 3.Removal Of The RSPF Upper Guide Plate Holes And Addition Of The Delivery Paper Guide Positioner. (WHITE) Service Manual / Technical Bulletin 2 100.25 KB
AR-286 (serv.man95) Change Carried Out In The Hard Disk. (WHITE) Service Manual / Technical Bulletin 2 116.42 KB
AR-286 (serv.man96) 1.Change Carried Out In the Main Harness. 2.Change Carried Out In The Spring Of the Multi Manual Unit. (WHITE) Service Manual / Technical Bulletin 2 78.46 KB
AR-286 (serv.man97) 1.Change Carried Out In The Bearings In The Paper Feeding Drive Unit. 2.Discontinuance Of The Manual Pressure Spring Attachment Plate. (WHITE) Service Manual / Technical Bulletin 2 79.02 KB
AR-286 (serv.man98) Change Carried Out In The Shape Of The AC Harness Cover. (WHITE) Service Manual / Technical Bulletin 2 76.15 KB
AR-286 (serv.man99) Report Of Flash Memory Version Method. (WHITE) Service Manual / Technical Bulletin 8 330.53 KB
AR-286 (serv.man100) 1.ICU PWB Change. 2.Shape Change Of Hard Disc Fixing Plate. (WHITE) Service Manual / Technical Bulletin 2 96 KB
AR-286 (serv.man101) Report Of Flash Memory Version Method. (WHITE) Service Manual / Technical Bulletin 6 133.5 KB
AR-286 (serv.man102) 1.Change Carried Out In The Height Of The ADU Opening And Closing PG Boss. 2.Change Carried Out In The PG Quantity Of The Paper Feeding Desk. (WHITE) Service Manual / Technical Bulletin 4 164.3 KB
AR-286 (serv.man103) Correction Measure Carried Out To Alleviate Problems Of Diagonal Feeding Which Occurred During Copy operations Using The ADF. (WHITE) Service Manual / Technical Bulletin 1 66.21 KB
AR-286 (serv.man104) Measure To Alleviate Problems Of Improperly Tightened Screws In The Paper Delivery Reversion Unit. (YELLOW) Service Manual / Technical Bulletin 1 59.71 KB
AR-286 (serv.man105) 1.Change Carried Out In The Assembly Contractor Of The Toner Hopper And Developing Unit. 2.Measure Carried Out To Protect The Main Switch Harness. 3.Measure To Improve The Alignment Performance Of The Waste Toner Transport Gear. 4.Measure To Diminish Abnormal Noise Which Occurs In The Paper Delivey Reversion No.2 Bin Unit. (WHITE) Service Manual / Technical Bulletin 5 136.78 KB
AR-286 (serv.man106) Report Of Flash Memory Version Method. (WHITE) Service Manual / Technical Bulletin 6 107.72 KB
AR-286 (serv.man107) Fast Facts 96 Firmware upgrade for AR336,286,250 Service Manual / Technical Bulletin 1 6.51 KB
AR-286 (serv.man13) ASPI Update and Check Utility Driver / Update 1.94 MB
AR-286 (serv.man14) Flash 5.1 Download Utility Driver / Update 16.94 KB
AR-286 (serv.man15) AR250 286 336 PCU Firmware 1.06 Driver / Update 805.12 KB
AR-286 (serv.man16) AR250 286 336 OPE Firmware 1.03 Driver / Update 1.26 MB
AR-286 (serv.man17) AR250 286 336 ICU Firmware 1.09 Driver / Update 979.83 KB
AR-286 Cougar Handy Guide (Updated March'02) Handy Guide 54 218.68 KB
AR-286 (serv.man11) Service Exchange Scheme Request Form (TP ServiceCo) FAQ 1 7.68 KB
AR-286 (serv.man12) Cougar Firmware Revision Table FAQ 6 19.71 KB
AR-286 (serv.man108) MSDS F-30901 Regulatory Data 2 12.06 KB
AR-286 (serv.man109) MSDS F-30891 Regulatory Data 2 11.6 KB
AR-286 (serv.man110) ENVIRONMENTAL DATA SHEET Regulatory Data 1 4.45 KB
AR-286 (serv.man111) MSDS F-00871 Regulatory Data 2 194.68 KB
AR-286 (serv.man112) MSDS F-00881 Regulatory Data 2 195.14 KB

RANDOM: