Sharp AR-235 (serv.man32) User Manual / Operation Manual ▷ View online
87
5
GE
NE
R
R
A
L INFORMATION
DISPLAY CONTRAST
ADJUSTMENT
ADJUSTMENT
The contrast of the display can be adjusted as below.
1
Press the SPECIAL FUNCTION key.
●
The SPECIAL FUNCTION screen will appear.
2
Use the and keys to select "DISPLAY CONTRAST" and press the
OK key.
OK key.
●
The screen for contrast setting will appear.
3
Use the and keys to adjust the contrast.
●
To reset the contrast to the default setting, press the CLEAR (C) key.
4
Press the SPECIAL FUNCTION key.
●
The display will return to the basic screen.
SPECIAL FUNCTION
SPECIAL MODES
ORIG. SIZE ENTER
PAPER SIZE SET
DISPLAY CONTRAST
PAPER SIZE SET
DISPLAY CONTRAST
DISPLAY CONTRAST
Cover1_2SUK.book 87 ページ 2001年5月24日 木曜日 午後8時55分
88
GE
NE
R
R
A
L INFORMATION
STORAGE OF SUPPLIES
Standard supplies for this copier that are to be replaced by the user are copy paper, toner cartridge,
and staple cartridge for the optional finisher (AR-FN5).
and staple cartridge for the optional finisher (AR-FN5).
Proper storage
1
Store the supplies in a location that is:
●
clean and dry,
●
at a stable temperature,
●
not exposed to direct sunlight.
2
Store copy paper in the wrapper and lying flat.
●
Paper stored in packages standing up or out of the wrapper may curl or become damp,
resulting in paper misfeeds.
resulting in paper misfeeds.
For best copying results, be sure to use only SHARP products. Only
genuine SHARP consumables carry the Genuine Supplies label.
genuine SHARP consumables carry the Genuine Supplies label.
GENUINE SUPPLIES
Cover1_2SUK.book 88 ページ 2001年5月24日 木曜日 午後8時55分
89
5
GE
NE
R
R
A
L INFORMATION
SPECIFICATIONS
AR-235
AR-275
Type
Digital laser copier/printer, desktop
Copy system
Dry, electrostatic transfer
Originals
Sheets, bound documents
Original sizes
Max. A3 (11" x 17")
Copy sizes
Max. A3 (11" x 17"), Min. A6 (5-1/2" x 8-1/2")
Image loss: Max.4 mm ( 5/32") (leading and trailing edges), Max. 3
mm (1/8") (along other edges)
mm (1/8") (along other edges)
Copying speed
(one-sided
copying at 100%
copy ratio)
(one-sided
copying at 100%
copy ratio)
600 dpi
23 copies/min. (A4 (8-1/2" x 11")) 27 copies/min. (A4 (8-1/2" x 11"))
16 copies/min. (A4R (8-1/2" x 11"R)) 18 copies/min. (A4R (8-1/2" x 11"R))
14 copies/min. (B4)
17 copies/min. (B4)
13 copies/min. (8-1/2" x 14")
16 copies/min. (8-1/2" x 14")
12 copies/min. (A3 (11" x 17"))
15 copies/min. (A3 (11" x 17"))
1200 dpi
13.5 copies/min. (A4 (8-1/2" x 11"))
9 copies/min. (A4R (8-1/2" x 11"R))
8.5 copies/min. (B4)
8 copies/min. (8-1/2" x 14")
7.5 copies/min. (A3 (11" x 17"))
Continuous copy
Max. 999 copies; subtractive counter
First-copy time
4.8 s (600 dpi, except in a power save mode)
✼
Warm-up time
Approx. 40 s
Copy ratio
Variable: 25% to 400%, in 1% increments (total 376 steps)
Fixed preset: 25%, 50%, 70%, 81%, 86%, 100%, 115%, 122%, 141%,
200%, 400% (25%, 50%, 64%, 77%, 95%, 100%, 121%, 129%,
141%, 200%, 400%)
200%, 400% (25%, 50%, 64%, 77%, 95%, 100%, 121%, 129%,
141%, 200%, 400%)
At 1200 dpi, the copy ratio range is limited within 50% to 200%.
Exposure system
Moving optical source, slit exposure (stationary platen) with automatic
exposure function
exposure function
Copy paper feed
Two paper trays with automatic feed (500 sheets each), one bypass
tray with automatic feed (100 sheets)
tray with automatic feed (100 sheets)
Fusing system
Heat rollers
Developer system
Magnetic brush development
Light source
Xenon lamp
Resolution
Scan: 400 dpi
Output: 600 dpi (1200 dpi in the super photo mode)
Gradation
Scan: 256 levels
Output: 2 levels
Power supply
Local voltage ± 10% (For this copier's power supply requirements,
see the name plate located on the back of the unit.)
see the name plate located on the back of the unit.)
Cover1_2SUK.book 89 ページ 2001年5月24日 木曜日 午後8時55分
SPECIFICATIONS
90
GE
NE
R
R
A
L INFORMATION
✼ First-copy time may differ depending on operating conditions, such as power-supply voltage and
room temperature.
NOTE:
As a part of our policy of continuous improvement, SHARP reserves the right to make design and
specification changes for product improvement without prior notice. The performance
specification figures indicated are nominal values of production units and there may be some
deviations from these values in individual units.
As a part of our policy of continuous improvement, SHARP reserves the right to make design and
specification changes for product improvement without prior notice. The performance
specification figures indicated are nominal values of production units and there may be some
deviations from these values in individual units.
Power consumption
Max. 1.2 kW
Overall dimensions (with
bypass tray folded)
bypass tray folded)
628 mm (W) x 585.5 mm (D)(24-13/16" (W) x 23-3/64" (D))
Weight
Approx. 47.8 kg (105.2 lbs.), toner cartridge included
Copier dimensions (without
platen cover)
platen cover)
628 mm (W) x 585.5 mm (D) x 643 mm (H)
(24-13/16" (W) x 23-3/64" (D) x 25-21/64" (H))
Operating conditions
Temperature: 15°C to 30°C (59°F to 86°F)
Humidity: 20% to 85%
Noise level
Sound Power Level L
WA
Copying: 6.3 [B], Standby: 3.9 [B]
Sound Pressure Level L
PA
(bystander positions)
Copying: 49 [dB (A)], Standby: 24 [dB (A)]
Noise emission measurement in accordance with ISO 7779.
Emission concentration
(measurement according to
RAL-UZ 62)
(measurement according to
RAL-UZ 62)
Ozone: 0.02 mg/m
3
or less
Dust: 0.075 mg/m
3
or less
Styrene: 0.07 mg/m
3
or less
Optional equipment
Single pass feeder (AR-SP4)
Reversing single pass feeder (AR-RP3)
Finisher (AR-FN5)
500-sheet paper feed unit (AR-D11)
2x500-sheet paper feed unit (AR-D12)
Platen cover (AR-VR3)
Printer expansion kit (AR-P11)
PS3 expansion kit (AR-PK1)
Barcode font kit (AR-PF1)
Job separator tray kit (AR-TR3)
Print server card (AR-NC5J)
Facsimile expansion kit (AR-FX4)
Network scanner expansion kit (AR-NS2)
Cover1_2SUK.book 90 ページ 2001年5月24日 木曜日 午後8時55分
Click on the first or last page to see other AR-235 (serv.man32) service manuals if exist.