Sharp AR-235 (serv.man32) User Manual / Operation Manual ▷ View online
SINGLE PASS FEEDER (AR-SP4)/REVERSING SINGLE PASS FEEDER (AR-RP3)
99
6
OP
T
IO
N
AL E
Q
UIP
M
E
N
T
4
Set the number of copies and press the START (
) key.
●
Be sure not to touch the originals as they move on the reversing tray. This may cause
misfeeds.
misfeeds.
One-sided copies from two-sided originals
To copy in the two-sided to one-sided copy mode, an RSPF must be installed.
1
Ensure that no original is left on the platen glass. Adjust the original
guides to the size of the originals and set the originals face up in the
document feeder tray.
guides to the size of the originals and set the originals face up in the
document feeder tray.
●
5-1/2" x 8-1/2" size originals cannot be used.
2
Press the 2-SIDED COPY key.
●
The duplex copy mode selection screen will appear.
COPY MODE
1 to 1
1 to 2
2 to 2
2 to 2
1
2
2
2
Cover1_2SUK.book 99 ページ ２００１年５月２４日 木曜日 午後８時５５分
SINGLE PASS FEEDER (AR-SP4)/REVERSING SINGLE PASS FEEDER (AR-RP3)
100
OP
T
IO
N
AL E
Q
UIP
M
E
N
T
3
Use the and keys to select two-sided to one-sided copying.
4
Use the or key to select binding change if desired. Then, press the
OK key.
OK key.
●
The image of one side can be rotated 180º using the image rotation feature. This feature
can be useful depending on the orientation of the original image and the desired binding
position.
can be useful depending on the orientation of the original image and the desired binding
position.
5
Set the number of copies and press the START (
) key.
●
Press the CLEAR (C) key to stop copying in the middle of a run.
●
Be sure not to touch the originals as they move on the reversing tray. This may cause
misfeeds.
misfeeds.
COPY MODE
2
1
2
2
2
1
1 to 2
2
to 2
2 to 1
BINDING CHANGE
OFF
Cover1_2SUK.book 100 ページ ２００１年５月２４日 木曜日 午後８時５５分
SINGLE PASS FEEDER (AR-SP4)/REVERSING SINGLE PASS FEEDER (AR-RP3)
101
6
OP
T
IO
N
AL E
Q
UIP
M
E
N
T
Misfeed removal
If an original misfeed occurs in the SPF or RSPF, the copier will stop and the message "Clear paper
path." will appear.
path." will appear.
1
Remove the misfed originals.
Location A
Open the feeding roller cover and pull the misfed original gently to the left and out from
the document feeder tray. Close the feeding roller cover.
the document feeder tray. Close the feeding roller cover.
Location B
Open the document feeder cover, rotate the rollers in the direction indicated by the
arrow to feed the misfed paper, and then gently remove the misfed original after closing
the document feeder cover.
arrow to feed the misfed paper, and then gently remove the misfed original after closing
the document feeder cover.
A
C
B
Feeding roller cover
Rollers
Cover1_2SUK.book 101 ページ ２００１年５月２４日 木曜日 午後８時５５分
SINGLE PASS FEEDER (AR-SP4)/REVERSING SINGLE PASS FEEDER (AR-RP3)
102
OP
T
IO
N
AL E
Q
UIP
M
E
N
T
●
If a small original such as A5 (5-1/2" x 8-1/2") original has misfed or an original has misfed in
the reversing tray (when an RSPF is installed), open the right side cover and gently remove the
misfed original. Close the right side cover.
the reversing tray (when an RSPF is installed), open the right side cover and gently remove the
misfed original. Close the right side cover.
Location C
●
Gently remove the misfed original from the exit area.
●
If the misfed original cannot be easily removed from the exit area, open the front part of the
document feeder tray to remove the original. With the RSPF, pull out the reversing tray to
remove the misfed original.
document feeder tray to remove the original. With the RSPF, pull out the reversing tray to
remove the misfed original.
NOTE:
With the RSPF, after removing the misfed original from the exit area, be sure to insert the
reversing tray into the exit area until it locks in place.
With the RSPF, after removing the misfed original from the exit area, be sure to insert the
reversing tray into the exit area until it locks in place.
2
Open and close the document feeder cover to cancel the misfeed
display.
display.
●
You can also cancel the misfeed display by opening and closing the feeding roller cover
or the right side cover.
or the right side cover.
●
The number of originals that must be returned to the document feeder tray will be
indicated in the display.
indicated in the display.
3
Return the indicated number of originals to the document feeder tray
and press the START (
and press the START (
) key to resume copying.
Right side cover
Cover1_2SUK.book 102 ページ ２００１年５月２４日 木曜日 午後８時５５分
Click on the first or last page to see other AR-235 (serv.man32) service manuals if exist.