Sharp AR-200 (serv.man9) User Manual / Operation Manual ▷ View online
19
MAKING COPIES
4
Press the TRAY SELECT key to select the bypass tray.
5
Leave the copy quantity at 0 if using special papers. Set
the number of copies if using standard copy paper or
envelopes.
the number of copies if using standard copy paper or
envelopes.
6
Press the START key.
BYPASS FEED (special paper)
Bypass feed (special paper)
20
MAKING COPIES
TWO-SIDED COPYING
Two-sided copies can be made on this copier using the bypass tray.
1
Place the first original on the original table and make a
copy.
copy.
●
The first copy can be made using any of the paper feed stations.
2
Replace the first original with the second original and
close the platen cover.
close the platen cover.
●
Make sure that the first and second originals are oriented in the same
way on the platen table.
way on the platen table.
●
When the originals are placed horizontally, make sure that the first and
second originals are oriented in the reverse way on the original table.
second originals are oriented in the reverse way on the original table.
3
Turn the first copy over left to right and place it into the
bypass tray.
bypass tray.
●
Be sure to feed the copies one sheet at a time.
4
Use the TRAY SELECT key to select the bypass tray.
5
Press the START key.
Two-sided copying
21
MAKING COPIES
1
Place the original on the original table and close the
platen cover.
platen cover.
2
Press the XY-ZOOM key.
●
The current value for the vertical direction will be displayed in the
copy quantity display.
copy quantity display.
3
Use the PRESET RATIO selector (
,
) keys and zoom
(
,
) keys to change the copy ratio in the vertical
direction.
●
Press a PRESET RATIO selector (
or
) key to set an approximate
ratio, then press the
key to decrease the ratio or
key to increase
the ratio. The copy ratio will be displayed in the copy quantity display.
4
Press the copy ratio display (
) key.
●
The selected ratio for the vertical direction will be entered and the
current value for the horizontal direction will be displayed in the copy
quantity display.
current value for the horizontal direction will be displayed in the copy
quantity display.
XY ZOOM
The XY ZOOM feature allows the horizontal and vertical copy ratios to be
changed independently. This feature cannot be used with the 2 in 1 or 4 in 1
feature. (The 2 in 1 or 4 in 1 feature can only be used when an optional
electronic sorting kit and an optional SPF are installed.)
To use the XY ZOOM feature with the DUAL PAGE COPY feature, set the
DUAL PAGE COPY feature first and then the XY ZOOM feature.
(Enlargement cannot be set.)
changed independently. This feature cannot be used with the 2 in 1 or 4 in 1
feature. (The 2 in 1 or 4 in 1 feature can only be used when an optional
electronic sorting kit and an optional SPF are installed.)
To use the XY ZOOM feature with the DUAL PAGE COPY feature, set the
DUAL PAGE COPY feature first and then the XY ZOOM feature.
(Enlargement cannot be set.)
XY zoom
Original
Copy
22
MAKING COPIES
XY zoom
XY ZOOM
5
Use the PRESET RATIO selector (
,
) keys and zoom
(
,
) keys to change the copy ratio in the horizontal
direction in a similar manner as for the vertical direction.
6
Press the copy ratio display (
) key.
●
The selected ratio for the horizontal direction will be entered and the
display will change to the copy quantity display.
display will change to the copy quantity display.
●
To verify the copy ratios, press and hold down the copy ratio display
(
(
) key. The vertical and horizontal ratios will be alternately displayed.
7
Ensure that the desired paper tray is selected.
8
Enter the desired number of copies.
9
Press the START key.
●
To change the copy ratios again, press a PRESET
RATIO selector (
RATIO selector (
,
) key or a zoom (
,
)
key. Then, perform step 3 and the succeeding
steps.
steps.
●
To cancel this function, press the XY-ZOOM key
again.
again.
Click on the first or last page to see other AR-200 (serv.man9) service manuals if exist.