DOWNLOAD Sharp AR-200 (serv.man5) Service Manual ↓ Size: 153.55 KB | Pages: 23 in PDF or view online for FREE

Model
AR-200 (serv.man5)
Pages
23
Size
153.55 KB
Type
PDF
Document
Service Manual
Brand
Device
Copying Equipment / AR200 Service Manual
File
ar-200-sm5.pdf
Date
PREV: Sharp AR-200 (serv.man4) Service Manual / Specification

Sharp AR-200 (serv.man5) Service Manual ▷ View online

Main 
code
Sub
code
Detail of trouble
L1
00
Cause
Mirror unit defect
Mirror home position sensor defect
MCU PWB decfect
Scanner wire disconnection
Check and
remedy
Check the scanning operation with SIM
1-1.
L3
00
Content
Mirror base return trouble
Detail
The mirror home position (MHPS) does
not turn on though the mirror base
returning is completed during mirror
initial operation after turning on the
power.
The mirror home position does not turn
on when the mirror is returned to the
home position during shading.
The mirror home position (MHPS) does
not turn on when the mirror base
returning is completed for the specified
time (about 6 sec) after copy return
start.
Cause
Mirror unit
Mirror home position sensor defect
MCU PWB defect
Scanner wire disconnection
Check and
remedy
Check the scanning operation with SIM
1-1.
L4
01
Content
Main motor lock
Detail
The main motor encoder pulse is not
detected for 400msec.
Cause
Main motor defect
Harness disconnection between the
MCU PWB and the main motor.
Control circuit failure
Check and
remedy
Check the main motor operation with
SIM 25-1.
Check the harness and the connector
between the MCU PWB and the main
motor. 
L6
10
Content
Polygon motor lock
Detail
The lock signal (the specified rotation
speed signal) is not supplied within the
specified time (about 6 sec)after
starting the polygon motor rotation.
Cause
LSU connector disconnection or
harness disconnection in the LSU.
Check and
remedy
Check the operation of the polygon
motor with SIM 25-10.
Check the harness and the connector
connection.
LSU replacement
L8
01
Content
Zero cross pulse (FW) trouble
Detail
Zero cross pulse width is shifted by
55Hz 
±
 10% or more.
Cause
MCU PWB defect
Power unit breakdown
Check and
remedy
Check the harness and the connector.
MCU PWB replacement
Power unit replacement
U2
04
Content
EEPROM serial communication error
Detail
Error in communication with EEPROM
Cause
EEPROM failure
Installation of uninitialized EEPROM
MCU PWB EERPOM access circuit
failure
Main 
code
Sub
code
Detail of trouble
U2
04
Check and
remedy
Check that the EEPROM is properly set.
To prevent against loss of
counter/adjustment values, record the
values with simulation.
U2 trouble cancel with SIM 16
MCU PWB replacement
11
Content
Counter check sum error
Detail
Counter check sum value stored in the
EEPROM is abnormal.
Cause
EEPROM failure
Control circuit hung up by noises
MCU PWB EEPROM access circuit
defect
Check and
remedy
Check that the EEPROM is properly
set. 
To prevent against loss of
counter/adjustment values, record the
values with simulation.
U2 trouble cancel with SIM 16
MCU PWB replacement
12
Content
Adjustment value check sum error
(EEPROM)
Detail
Adjustment value data area check sum
error
Cause
EEPROM failure
Control circuit hung up by noises
MCU PWB EEPROM access circuit
failure
Check and
remedy
Check that the EEPROM is properly set.
To prevent against loss of
counter/adjustment values, record the
values with simulation.
U2 trouble cancel with SIM 16
MCU PWB replacement
U3
29
Content
Mirror base home position error
Detail
Home position is not detected when
starting mirror base shift.
Cause
Mirror unit defect
Mirror home position sensor defect
MCU PWB decfect
Scanner wire disconnection
Check and
remedy
Check the scanning operation with SIM
1-1.
U9
00
Content
U9-
∗∗∗
 Communication trouble
between MCU and OPE (OPE
detection)
Detail
Communication setup error, framing,
parity, protocol error
Cause
Operation control PWB connector
disconnection
Operation control PWB MCU PWB
harness failure
Check and
remedy
Check the connectors and harness of
the operation control PWB and the
MCU PWB.
Check grounding of the machine.
Check the ROM of the operation
control PWB.
80
Content
Operation control PWB communication
trouble (Protocol)
Detail
Communication trouble between MCU
and the operation control PWB
(Protocol error)
AR-200
6 – 3
Main 
code
Sub
code
Detail of trouble
U9
80
Cause
Operation control PWB connector
disconnection
Operation control PWB MCU PWB
harness failure
Check and
remedy
Check the connectors and harness of
the operation control PWB and the
MCU PWB.
Check grounding of the machine.
81
Content
Operation control PWB communication
trouble (Parity)
Detail
Communication trouble between MCU
and the operation control PWB (Parity
error)
Cause
Operation control PWB connector
disconnection
Operation control PWB MCU PWB
harness failure
Check and
remedy
Check the connectors and harness of
the operation control PWB and the
MCU PWB.
Check grounding of the machine.
82
Content
Operation control PWB communication
trouble (Overrun)
Detail
Communication trouble between MCU
and the operation control PWB
(Overrun error)
Cause
Operation control PWB connector
disconnection
Operation control PWB MCU PWB
harness failure
Check and
remedy
Check the connectors and harness of
the operation control PWB and the
MCU PWB.
Check grounding of the machine.
84
Content
Operation control PWB communication
trouble (Framing)
Detail
Communication trouble between MCU
and the operation control PWB
(Framing error)
Cause
Operation control PWB connector
disconnection
Operation control PWB MCU PWB
harness failure
Check and
remedy
Check the connectors and harness of
the operation control PWB and the
MCU PWB.
Check grounding of the machine.
88
Content
Operation control PWB communication
trouble (Time-out)
Detail
Communication trouble between MCU
and the operation PWB (Time-out error)
Cause
Operation control PWB connector
disconnection
Operation control PWB MCU PWB
harness failure
Check and
remedy
Check the connectors and harness of
the operation control PWB and the
MCU PWB.
Check grounding of the machine.
AR-200
6 – 4
Printed in Japan.
SHARP CORPORATION
Printing & Reprographic Systems Group
Quality & Reliability Control Center
Yamatokoriyama, Nara 639-1186, Japan
1999 February Printed in Japan 
N
AR-200
Printed in Japan.
SHARP CORPORATION
Printing & Reprographic Systems Group
Quality & Reliability Control Center
Yamatokoriyama, Nara 639-1186, Japan
1999 February Printed in Japan 
N
AR-200
Page of 23
Display

Sharp AR-200 (serv.man5) Service Manual ▷ Download

Found More:

AR-200 (serv.man5) Service Manuals

Preview DownloadPagesSize
AR-200 (serv.man9) AR200 Operation Manual-Part 1 User Manual / Operation Manual 28 875.36 KB
AR-200 (serv.man10) AR200 Operation Manual-Part 2 User Manual / Operation Manual 10 406.13 KB
AR-200 (serv.man11) AR200 Operation Manual-Part 3 User Manual / Operation Manual 18 216.41 KB
AR-200 (serv.man12) AR200 Operation Manual-Part 4 User Manual / Operation Manual 28 487.6 KB
AR-200 (serv.man6) Information of parts change Service Manual / Parts Guide 2 28.25 KB
AR-200 (serv.man7) Information of parts change To improve productivity, the L pulley has been changed. Service Manual / Parts Guide 2 20.3 KB
AR-200 (serv.man8) AR200 Parts Guide Service Manual / Parts Guide 12 400 KB
AR-200 (serv.man2) Strength increase of the grid mounting area on the MC holder rear side Service Manual / Specification 2 574.94 KB
AR-200 (serv.man3) Disuse of the fusing front transport sheet due to change of the side door inner frame Service Manual / Specification 2 892.31 KB
AR-200 (serv.man4) AR200 Specifications Service Manual / Specification 3 154.91 KB
AR-200 (serv.man20) Manual paper feed roller material change. Service Manual / Technical Bulletin 5 342.3 KB
AR-200 (serv.man21) MODIFICATION OF PAPER FEED ROLLER HOLDER ETC. TO IMPROVE PRODUCTIVITY Service Manual / Technical Bulletin 5 290.28 KB
AR-200 (serv.man22) MATERIAL CHANGE PAPER FEED SHEET Service Manual / Technical Bulletin 4 354.66 KB
AR-200 (serv.man23) Information of parts change (Righthand Door Assembly). Service Manual / Technical Bulletin 1 100.72 KB
AR-200 (serv.man24) Information of parts change (Duplex drive idle plate Copy lamp unit). Service Manual / Technical Bulletin 2 80.54 KB
AR-200 (serv.man25) Strength increase of the fusing lower frame. Service Manual / Technical Bulletin 2 57.91 KB
AR-200 (serv.man26) Strength increase of the boss for mounting the manual paper feeding latch pawl B. Service Manual / Technical Bulletin 3 934.83 KB
AR-200 (serv.man27) Parts Changes. Service Manual / Technical Bulletin 1 21.62 KB
AR-200 (serv.man28) Parts Change. Service Manual / Technical Bulletin 2 30.21 KB
AR-200 (serv.man29) Parts Change, Main Motor. Service Manual / Technical Bulletin 1 21.81 KB
AR-200 (serv.man30) Countermeasure against wrinkles on the copy paper or paper jam due to shrinkage of the FU felt. Service Manual / Technical Bulletin 2 26.84 KB
AR-200 (serv.man31) Attachment of a high temperature Caution Label. Service Manual / Technical Bulletin 2 106.9 KB
AR-200 (serv.man32) Change due to production stoppage of rubber for the manual paper feed roller (repeat due to incorrect information) Service Manual / Technical Bulletin 2 84.65 KB
AR-200 (serv.man33) Change due to production stoppage of rubber for the manual paper feed roller. Service Manual / Technical Bulletin 2 122.55 KB
AR-200 (serv.man34) 1. Change of the MX roller, 2. Material change of the roller arm, 3. Shape change of the delivery upper guide 20, 4. Change of the fusing connecting plate, 5. Standardisation of the parts code for the ATC sensor. Service Manual / Technical Bulletin 5 112.48 KB
AR-200 (serv.man35) 1. Multi frame change, 2. Shape change of the fusing cover. Service Manual / Technical Bulletin 2 16.54 KB
AR-200 (serv.man36) 1. Multi frame change, 2. Shape change of the fusing cover. Service Manual / Technical Bulletin 2 38.6 KB
AR-200 (serv.man37) Countermeasure against wideningof the screw hole of fixing the fuser unit to the intermediate frame. Service Manual / Technical Bulletin 2 483.51 KB
AR-200 (serv.man38) Information of parts change. 1 Fusing front PG change. 2 Cleaning blade change. 3 Roller pawl change. 4 Change of the AC switch to comply with RoHS. 5 Change of the line cable to comply with RoHS. Service Manual / Technical Bulletin 4 308.83 KB
AR-200 (serv.man39) Change of parts for the fusing unit. Service Manual / Technical Bulletin 2 35.61 KB
AR-200 (serv.man40) Replacement procedure for the polygon motor in the LSU unit. Service Manual / Technical Bulletin 4 310.83 KB
AR-200 (serv.man41) Information of parts change. (MF Sensor Spring, Delivery Pulley 34T) Service Manual / Technical Bulletin 2 359.14 KB
AR-200 (serv.man42) 128-Information of parts change. Service Manual / Technical Bulletin 1 9.71 KB
AR-200 (serv.man43) Correction to illustration of optical unit in parts guide. Service Manual / Technical Bulletin 1 80.77 KB
AR-200 (serv.man44) Countermeasure against paper jam when ejecting Service Manual / Technical Bulletin 2 92.81 KB
AR-200 (serv.man45) CHANGE OF PARTS (Base Plate Unit 2 Delivery Frame Unit MCU PWB) Service Manual / Technical Bulletin 1 26.04 KB
AR-200 (serv.man46) Countermeasure against paper jam due to deformation of the fusing upper paper guide sheet. Service Manual / Technical Bulletin 2 47.77 KB
AR-200 (serv.man47) Countermeasure against skewing due to gap in Tray Guide R Service Manual / Technical Bulletin 2 185.54 KB
AR-200 (serv.man48) Information of parts change Service Manual / Technical Bulletin 2 791.3 KB
AR-200 (serv.man49) Part number for Panther-series Power Switch Service Manual / Technical Bulletin 1 11.11 KB
AR-200 (serv.man50) Countermeasure against U2-40 trouble due to power supply noise Service Manual / Technical Bulletin 1 1.08 MB
AR-200 (serv.man51) New supply of EEPROM for service Service Manual / Technical Bulletin 1 7.2 KB
AR-200 (serv.man52) Change to shape of rear plate to prevent dislocation Service Manual / Technical Bulletin 1 183.13 KB
AR-200 (serv.man53) Countermeasure against manual feed paper jams, due to contamination of drive section Service Manual / Technical Bulletin 2 277.55 KB
AR-200 (serv.man54) Improved durability of cam transmission arm in manual paper feed unit Service Manual / Technical Bulletin 1 13 KB
AR-200 (serv.man55) Countermeasure against breakage of the fusing rear paper guide rib Service Manual / Technical Bulletin 1 115.9 KB
AR-200 (serv.man56) Countermeasure against breakage of the discharge holder claw Service Manual / Technical Bulletin 1 93.75 KB
AR-200 (serv.man57) Countermeasure against paper jam when ejecting paper Service Manual / Technical Bulletin 1 70.94 KB
AR-200 (serv.man58) Countermeasure against F1-06 errors Service Manual / Technical Bulletin 1 54.35 KB
AR-200 (serv.man59) Countermeasure against fall of DMC actuator Service Manual / Technical Bulletin 1 14.47 KB
AR-200 (serv.man60) Parts change information for PS transport roller Service Manual / Technical Bulletin 1 13.27 KB
AR-200 (serv.man61) Countermeasure for black stripes when using SPF, and for occurrence of E7-04 error message Service Manual / Technical Bulletin 2 37.56 KB
AR-200 (serv.man62) Countermeasure against skewing when feeding from cassette Service Manual / Technical Bulletin 1 20.88 KB
AR-200 (serv.man63) Design of feeding rollers is changed to improve quality of paper feeding Service Manual / Technical Bulletin 2 52.56 KB
AR-200 (serv.man64) Reprogramming service for ARFX2 facsimile option for panther - series machines Service Manual / Technical Bulletin 1 12.64 KB
AR-200 (serv.man65) Information of parts change (MCU PWB) Service Manual / Technical Bulletin 1 15.65 KB
AR-200 (serv.man66) Information of parts change (document feed) Service Manual / Technical Bulletin 1 13.25 KB
AR-200 (serv.man67) Correction of E7-04 error Service Manual / Technical Bulletin 1 12.56 KB
AR-200 (serv.man68) Parts change information (paper feeding unit process unit side door unit) Service Manual / Technical Bulletin 2 53.53 KB
AR-200 (serv.man69) Countermeasure against right door detection error Service Manual / Technical Bulletin 1 950.17 KB
AR-200 (serv.man70) Parts change information (feeding frame rollers) Service Manual / Technical Bulletin 1 14.07 KB
AR-200 (serv.man71) New supply of a service part (paper feed roller rubber) Service Manual / Technical Bulletin 1 12.43 KB
AR-200 (serv.man72) Countermeasure against abnormal noise from the 2nd transport clutch Service Manual / Technical Bulletin 1 33.05 KB
AR-200 (serv.man73) Version change of the maintenance (firmware download) software Service Manual / Technical Bulletin 1 13.34 KB
AR-200 (serv.man74) Parts change information (MCU PWB) Service Manual / Technical Bulletin 1 12.86 KB
AR-200 (serv.man75) Change of cassette lock claws Service Manual / Technical Bulletin 1 23.34 KB
AR-200 (serv.man76) New supply of service part Service Manual / Technical Bulletin 1 23.99 KB
AR-200 (serv.man77) Reducing white stripes on the CRU unit Service Manual / Technical Bulletin 1 21.38 KB
AR-200 (serv.man78) Parts change information Service Manual / Technical Bulletin 2 530.64 KB
AR-200 (serv.man79) New supply of fusing unit adding a cleaning felt AS Service Manual / Technical Bulletin 1 21.92 KB
AR-200 (serv.man80) Information about the part code of the delivery frame Service Manual / Technical Bulletin 1 21.9 KB
AR-200 (serv.man81) Parts change information Service Manual / Technical Bulletin 2 205.2 KB
AR-200 (serv.man82) New supply of fusing unit adding a cleaning felt AS Service Manual / Technical Bulletin 1 21.58 KB
AR-200 (serv.man83) Parts change (lens unit) Service Manual / Technical Bulletin 1 21.48 KB
AR-200 (serv.man84) New supply of a service parts described in AR161 200 ref 079 Service Manual / Technical Bulletin 1 23.39 KB
AR-200 (serv.man85) Software version upgrade of the main ROM for simplex models (Correction of jam detection error in special conditions) Service Manual / Technical Bulletin 1 22.59 KB
AR-200 (serv.man86) Countermeasure against folding of the corner of copying paper on duplex print Service Manual / Technical Bulletin 1 40.57 KB
AR-200 (serv.man87) Countermeasure against oblique feed of the cassette Service Manual / Technical Bulletin 1 33.04 KB
AR-200 (serv.man88) Countermeasure against soiling of upper heat roller. Service Manual / Technical Bulletin 2 111.83 KB
AR-200 (serv.man89) Parts change. Service Manual / Technical Bulletin 3 117.2 KB
AR-200 (serv.man90) Support of double feed during cassette paper feed and document double feed. Service Manual / Technical Bulletin 4 204 KB
AR-200 (serv.man91) Countermeasure against L4-01 (main motor lock) and paper jam. Service Manual / Technical Bulletin 2 345.83 KB
AR-200 (serv.man92) Change of the tonor motor.(Toner not supplied) Service Manual / Technical Bulletin 1 64.45 KB
AR-200 (serv.man93) Countermeasure against job separator home position detection error. Service Manual / Technical Bulletin 2 99.39 KB
AR-200 (serv.man94) Improvement of the manual paper feeding tray lock. Service Manual / Technical Bulletin 1 101.77 KB
AR-200 (serv.man95) Application of grease to the paper feed cassette rail. Service Manual / Technical Bulletin 1 100.39 KB
AR-200 (serv.man96) Countermeasure against breakage of the 2nd joint gear teeth. (WHITE) Service Manual / Technical Bulletin 2 87.92 KB
AR-200 (serv.man97) Parts change for the productivity improvement. (WHITE) Service Manual / Technical Bulletin 2 84.18 KB
AR-200 (serv.man98) Caution when replacing the MCU. (WHITE) Service Manual / Technical Bulletin 1 60.59 KB
AR-200 (serv.man99) Version upgrade of main body software. (Update of ref.068)(WHITE) Service Manual / Technical Bulletin 1 63.35 KB
AR-200 (serv.man100) Change of the operation instruction label. (WHITE) Service Manual / Technical Bulletin 2 102.41 KB
AR-200 (serv.man101) Version upgrade of the main body software. (WHITE) Service Manual / Technical Bulletin 1 36.58 KB
AR-200 (serv.man102) Change of the operation instruction label. (WHITE) Service Manual / Technical Bulletin 2 72.22 KB
AR-200 (serv.man103) Change of the shifter gear (50T). (WHITE) Service Manual / Technical Bulletin 2 62.9 KB
AR-200 (serv.man104) Change of the LSU unit. (WHITE) Service Manual / Technical Bulletin 1 36.42 KB
AR-200 (serv.man105) Parts change of the fusing unit. (WHITE) Service Manual / Technical Bulletin 1 49.79 KB
AR-200 (serv.man106) Supply of the paper feed roller as a service part. (WHITE) Service Manual / Technical Bulletin 1 126.6 KB
AR-200 (serv.man107) Material change of the fusing gear (45T). (WHITE) Service Manual / Technical Bulletin 1 128.41 KB
AR-200 (serv.man108) Version upgrade of the software of the main body. (WHITE) Service Manual / Technical Bulletin 1 102.46 KB
AR-200 (serv.man109) Parts change. (WHITE) Service Manual / Technical Bulletin 19 714.79 KB
AR-200 (serv.man110) Developer Unit Improvement To Correct Clearance Between MX Roller Shaft And Shaft Bearing. (WHITE) Service Manual / Technical Bulletin 2 89.23 KB
AR-200 (serv.man111) Change Of The Photoconductor. (WHITE) Service Manual / Technical Bulletin 1 61.61 KB
AR-200 (serv.man112) Fax Kit Problems. (WHITE) Service Manual / Technical Bulletin 2 68.58 KB
AR-200 (serv.man113) 1.Change Of The LSU Unit. 2.Change Of The Lamp Base Plate. 3.Change Of The LCD Spacer. (WHITE) Service Manual / Technical Bulletin 2 69.68 KB
AR-200 (serv.man114) 1.Earth Wire Treatment Of The 2nd Cassette Interface Harness. 2.Setting Change Of The Default Value Of The Preheat Transition Time Of AR200 For Europe. 3.Information About The Rear Exterior Mounting Procedure. 4.Default Setting Change Of SIM26-51 Copy Stop Setting . (WHITE) Service Manual / Technical Bulletin 3 140.35 KB
AR-200 (serv.man115) Satisfaction Of Energy Star. (WHITE) Service Manual / Technical Bulletin 2 70.51 KB
AR-200 (serv.man116) 1.Version Upgrade Of The CDROM. 2.Version Upgrade Of The PCL Firmware. 3.Release Of The Fax Program. 4.Parts Change For Better Productivity. 5.Supply Of Expanded Memory For The PCL PWB. (WHITE) Service Manual / Technical Bulletin 3 74.48 KB
AR-200 (serv.man117) Noisy Laser Unit. (WHITE) Service Manual / Technical Bulletin 1 58.08 KB
AR-200 (serv.man118) Correction To The Parts Guide. (WHITE) Service Manual / Technical Bulletin 2 79.58 KB
AR-200 (serv.man119) (Revision to reference 041)1.Change Of The Fusing Lower Frame. 2.Change Of The SPF Rack Cover. 3.Countermeasure Against Poor Insertion Of The Motherboard Connector. 4.Change Of The Rubber Cushion. (WHITE) Service Manual / Technical Bulletin 3 85.32 KB
AR-200 (serv.man120) Change Of The DV Side Sheet. (WHITE) Service Manual / Technical Bulletin 1 75.23 KB
AR-200 (serv.man121) Change Of The Default Values. (WHITE) Service Manual / Technical Bulletin 1 66.6 KB
AR-200 (serv.man122) 1.Addition Of Installation Procedure Manual And Protection Sheet. 2.Addition Of Maintenance Card. (WHITE) Service Manual / Technical Bulletin 2 65.93 KB
AR-200 (serv.man123) Satisfaction Of Energy Star. (WHITE) Service Manual / Technical Bulletin 2 70.73 KB
AR-200 (serv.man124) 1.Change Of The PSF Glass Sheet R. 2.Dimensions Change Of The PS Transport Roller. 3.Material Change Of The Copy Operation PWB. (WHITE) Service Manual / Technical Bulletin 3 92.52 KB
AR-200 (serv.man125) 1.Shape Change Of The OP PWB Shield And Addition Of A Shield Plate Card. 2.Shape Change Of The Copy Lamp Unit. 3.Disuse Of the Sub Blade Earth Plate. (WHITE) Service Manual / Technical Bulletin 2 67.58 KB
AR-200 (serv.man126) Version Upgrade Of The Main Body Software. (WHITE) Service Manual / Technical Bulletin 1 61.43 KB
AR-200 (serv.man127) Parts Change For Better Productivity. (WHITE) Service Manual / Technical Bulletin 2 68.56 KB
AR-200 (serv.man128) 1.Change Of The Fusing Lower Frame. 2.Change Of the PSF Rack Cover. 3.Countermeasure Against Poor Insertion Of The Motherboard Connector. 4.Change Of The Rubber Cushion. (WHITE) Service Manual / Technical Bulletin 3 85.19 KB
AR-200 (serv.man129) Correction To The Parts Guide. (WHITE) Service Manual / Technical Bulletin 1 123.76 KB
AR-200 (serv.man130) 1.Countermeasure Against Abnormal Noise. 2.Countermeasure Against Shifter Operation. 3.Shape Change Of The Cooling Fan Duct. (WHITE) Service Manual / Technical Bulletin 3 79.41 KB
AR-200 (serv.man131) 1.Change Of The Operation Panel Exterior. 2.Screw Change. (WHITE) Service Manual / Technical Bulletin 2 70.13 KB
AR-200 (serv.man132) Software Version Upgrade Of The Main Body. (WHITE) Service Manual / Technical Bulletin 1 61.73 KB
AR-200 (serv.man133) Parts Change For Better Productivity. (WHITE) Service Manual / Technical Bulletin 2 71.48 KB
AR-200 (serv.man134) 1.Change Of The Discharge Holder. 2.Shape Change Of The Copy Key. 3.Addition Of The Harness Protection Sheet. (WHITE) Service Manual / Technical Bulletin 2 85.08 KB
AR-200 (serv.man135) Parts Change For Better Productivity. (WHITE) Service Manual / Technical Bulletin 2 70.17 KB
AR-200 (serv.man136) Addition To The Service Manual. (WHITE) Service Manual / Technical Bulletin 1 65.17 KB
AR-200 (serv.man137) Correction To The Parts Guide. (WHITE) Service Manual / Technical Bulletin 1 65.82 KB
AR-200 (serv.man138) 1.Shape Change Of Fusing Cover. 2.Countermeasure Against Abnormal Noise. (WHITE) Service Manual / Technical Bulletin 2 79.7 KB
AR-200 (serv.man139) 1.Change Of Harness Treating Method. 2.Shape Change Of Separator Lever F. (WHITE) Service Manual / Technical Bulletin 2 114.22 KB
AR-200 (serv.man140) Parts Change For Better Productivity. (WHITE) Service Manual / Technical Bulletin 2 81.99 KB
AR-200 (serv.man141) 1.Shape Change Of Rear Exterior. 2.Shape Change Of MCU Fixing Plate. 3.Shape Change Of Sensor Fixing Plate And Optical Base Plate. (WHITE) Service Manual / Technical Bulletin 2 71.73 KB
AR-200 (serv.man142) 1.Change Of 3-Terminal Regulator. 2.Change Of Corner Frame R Re-inforce Plate. 3.Shape Change Of Delivery Tray. (WHITE) Service Manual / Technical Bulletin 2 70.9 KB
AR-200 (serv.man143) Corrections To The Service Manual. (WHITE) Service Manual / Technical Bulletin 2 280.47 KB
AR-200 (serv.man144) 1.Change Of Delivery Earth Spring A. 2.Disuse Of Fusing Front PG Adjusting Shaft. 3.Shape Change Of Base Plate Rail R. (WHITE) Service Manual / Technical Bulletin 2 71.6 KB
AR-200 (serv.man145) 1.Shape Change Of DMC Actuator. 2.Change Of Fron Cabinet. 3.Disuse Of Screws. (WHITE) Service Manual / Technical Bulletin 4 557.37 KB
AR-200 (serv.man146) New Supply Of Process Sub-unit. (WHITE) Service Manual / Technical Bulletin 2 65.11 KB
AR-200 (serv.man147) Countermeasure For Envelopes Postcards Feeding Failure Problem. (WHITE) Service Manual / Technical Bulletin 2 79.75 KB
AR-200 (serv.man148) Shape Change Of Pipe Shutter. (WHITE) Service Manual / Technical Bulletin 1 36.68 KB
AR-200 (serv.man149) Correction To The Parts Guide. (WHITE) Service Manual / Technical Bulletin 1 76.03 KB
AR-200 (serv.man150) Countermeasure Against Jam By Catching Thin Paper In The Drum. (WHITE) Service Manual / Technical Bulletin 2 61.84 KB
AR-200 (serv.man151) Countermeasure Against The Improper Movement Of ARTR2 (Job Separator). (WHITE) Service Manual / Technical Bulletin 2 95.25 KB
AR-200 (serv.man152) 1.Change Of TC BC Interface Electrode Spring. 2.Change Of MCU PWB Parts. 3.Change Of Mirror Motor. (WHITE) Service Manual / Technical Bulletin 2 27.21 KB
AR-200 (serv.man153) 1.Correspondence To EMI. 2.Change Of PS Roller Shaft. 3.Shape Change Of DMC Actuator. 4.Addition Of Front Cover Label. (WHITE) Service Manual / Technical Bulletin 1 25.54 KB
AR-200 (serv.man154) Change Of Reverse Gate. (WHITE) Service Manual / Technical Bulletin 1 23.5 KB
AR-200 (serv.man155) 1.Prevention Against Vibration Of Job Separator. 2.Shape Change Of Separator Lever R. 3.Shape Change Of Full Detection Lever. (WHITE) Service Manual / Technical Bulletin 1 26.12 KB
AR-200 (serv.man156) 1.Countermeasure Against Vertical Stripes. 2.Dry Heater Change. 3.Prevention Against Disengagement Of Bearing Due To Deformation Of Delivery Earth Plate. 4.Countermeasure Against White Stripes In The Halftone Mode. 5.Change Of LED On The Operation PWB. (WHITE) Service Manual / Technical Bulletin 2 41.14 KB
AR-200 (serv.man157) F5-02 Change Of Connector To That With Slider. (WHITE) Service Manual / Technical Bulletin 1 22.94 KB
AR-200 (serv.man158) Parts Guide Correction. (WHITE) Service Manual / Technical Bulletin 1 23.02 KB
AR-200 (serv.man159) Supply Of Service Unit For The Process Unit. (WHITE) Service Manual / Technical Bulletin 2 57.81 KB
AR-200 (serv.man160) Correction Of Flash ROM Version Update (Issue Of No.2.03). (WHITE) Service Manual / Technical Bulletin 3 470.4 KB
AR-200 (serv.man161) Update Of The Software Version Due To Release Of The Option Electronic Sort Board. (WHITE) Service Manual / Technical Bulletin 3 473.83 KB
AR-200 (serv.man162) Update Of The Software Version Due To Release Of The Option Printer Board. (WHITE) Service Manual / Technical Bulletin 3 688.27 KB
AR-200 (serv.man163) Supply Of Individual Parts Of Copy Lamp Unit. (WHITE) Service Manual / Technical Bulletin 2 61.58 KB
AR-200 (serv.man164) Correction Of Flash ROM Version Upgrade. (WHITE) Service Manual / Technical Bulletin 3 684.88 KB
AR-200 (serv.man165) Correction To The Parts Guide. (WHITE) Service Manual / Technical Bulletin 1 18.52 KB
AR-200 (serv.man166) Version 4.10 Firmware (Sent out as Fast Fact 89). Service Manual / Technical Bulletin 1 10.36 KB
AR-200 (serv.man167) Flash Upgrade Procedure (Sent out as Fast Facts 085) Service Manual / Technical Bulletin 3 325.04 KB
AR-200 (serv.man171) Countermeasure against peeling of the fusing front PG sheet Service Manual / Technical Bulletin 43.55 KB
AR-200 (serv.man16) AR161 200 Firmware (version 5.32) Driver / Update 240.77 KB
AR-200 (serv.man17) AR161 200 DM2000-Firmware for coin vendor Ver7.05 Driver / Update 243.42 KB
AR-200 (serv.man18) AR161 200 Firmware (version 5.29) Driver / Update 236.8 KB
AR-200 (serv.man19) AR161 200-Firmware for coin vendor Ver7.02 Driver / Update 238.96 KB
AR-200 December 2002 Handy Guide 35 1.83 MB
AR-200 (serv.man13) Panther firmware history table (FEB-04), including details of AR-PB8 firmware. FAQ 5 77.93 KB
AR-200 (serv.man14) Details of Fast Facts 100 Damage to ARSP2 ARRP1 FAQ 1 100.4 KB
AR-200 (serv.man15) AR-161,200,205 Caution in connecting AR-SP2 FAQ 1 2.75 KB
AR-200 (serv.man168) MSDS F-00841 Regulatory Data 2 12.59 KB
AR-200 (serv.man169) MSDS F-30841 Regulatory Data 2 11.41 KB
AR-200 (serv.man170) Environmental Data Sheet Regulatory Data 1 8.71 KB

RANDOM: