DOWNLOAD Sharp AR-161 (serv.man10) Service Manual ↓ Size: 103.57 KB | Pages: 13 in PDF or view online for FREE

Main
code

Sub

code

Contents

Details of operation

Initial
value

Set range

22

16

Duplex print counter
display

Used to display the current duplex print counter value. 

∗

1

17

Copy counter display

Used to display the current copy counter value. 

∗

1

18

Printer counter display

Used to display the current printer counter value. 

∗

1

19

Electronic sort counter
display

Used to display the current electronic sort counter value. 

∗

1

20

FAX print counter display

Used to display the current FAX print counter value. 

∗

1

21

Scanner counter display

Used to display the current scanner counter value.

24

1

JAM memory, JAM
counter clear 

Used to clear the JAM memory and the JAM counter. 

∗

2

2

Trouble memory clear

Used to clear the trouble memory. 

∗

2

4

SPF counter clear

Used to clear the SPF counter. 

∗

2

5

Duplex counter clear

Used to clear the duplex counter. 

∗

2

6

Paper feed counter clear

Used to clear the paper feed counter. 

∗

2

7

Drum counter clear

Used to clear the drum counter. 

∗

2

8

Copy counter clear

Used to clear the copy counter. 

∗

2

9

Printer counter clear

Used to clear the printer counter. 

∗

2

10

Electronic sort counter
clear

Used to clear the electronic sort counter. 

∗

2

11

FAX print counter clear

Used to clear the FAX print counter. 

∗

2

13

Scanner counter clear

Used to clear the scanner counter.

25

1

Main motor operation
check 

Used to drive the main motor for 30 sec. At that time, the cooling motor
rotates at a low speed.
When the developing unit is installed, the developing bias, the grid, and
the main charger are driven.
When the developing unit is not installed, only the main motor is driven. 

10

Polygon motor operation
check 

Used to drive the polygon motor for 30 sec. 

26

1

Operation switch display

Used to display the installed option on the operation panel. (The LED
corresponding to the installed option is lighted.)

Key operation

Display

Display select: 
    Magnification ratio key

<Lighting with an option installed>
When "A" is displayed:
Shifter: Paper empty LED
Job separator: JAM LED
SPF: SPF select LED
RSPF: SPF JAM LED

Dehumidifying heater: Main body JAM LED

Simplex mode: Multi manual paper feed select LED

Cassette (2nd step): No. 2 cassette select LED

Cassette (3rd step): No. 3 cassette select LED

Cassette (4th step): No. 4 cassette select LED

Memory installed: Paper empty LED

FAX: JAM LED

Printer: Main body JAM LED

ERDH: Main cassette select LED

16CPM: SPF JAM LED

20CPM: SPF select LED

Document sensor: Auto paper select LED

3

Auditor setting

Used to display the current auditor setting with the numbers at right. 
After entering the set value, press the start key, and the set value is
stored. 

Key operation/Display

0: Built-in auditor

1: Coin vendor

2: Others

∗

1: Each counter display method

To display 12345: 123 (0.75 sec) 

→

 Blank (0.35sec) 

→

 456 (0.75 sec) 

→

 Blank (1.0 sec) 

→

 repetition

∗

2: Display after clearing each counter 

000 (0.75 sec) 

→

 Blank (0.35sec) 

→

 000 (0.75 sec) 

→

 Blank (1.05 sec) 

→

 Repetition

AR-160/160 FM/E [8] SIMULATION 12/1/1998

AR-161

8 – 6

Main
code

Sub

code

Contents

Details of operation

Initial
value

Set range

26

5

Counter mode setting

Used to set the print counter mode in A3 or 11" 

×

 17".

Used to display the currently set counter value with the numbers at right.
After entering the set value, press the start key, and the set value is
stored.

Key operation/Display

0: Total/Developer = 2 counts

Maintenance = 2 counts

1: Total/Developer = 1 count

Maintenance = 2 counts

2: Total/Developer = 2 counts

Maintenance = 1 count

3: Total/Developer = 1 count

Maintenance = 1 count

6

Destination setting

Used to display the current destination setting with the numbers at right.
After entering the set value, press the start key, and the set value is
stored. 

Key operation/Display

 0: Japan

 1: USA (Inch series)

  2: Canada (Inch series)

  3: Germany (AB series)

  4: UK (AB series)

  5: Australia (AB series)

  6: France (AB series)

  7: EX inch series

 8: EX AB series

  9: EX inch series (FC conformity)

10: EX AB series (FC conformity)

11: Taiwan, China (AB series)

22

Language setting

Used to display the current setting of the language information with the
number at right. After entering the set value, press the start key, and the
set value is stored.

Key operation/Display

0: Japanese

1: English

2: French

3: German

4: Italian

5: Dutch

6: Swedish

7: Spanish

30

CE mark conformity
control setting

Used to display the current setting of CE mark conformity control with the
number at right. After entering the set value, press the start key, and the
set value is stored.

Key operation/Display

0: CE mark control OFF

1: CE mark control ON

30

1

Machine sensor operation
check 

Used to check the sensors in the machine transport system with LED on
the operation panel.

Display

<Lighting at sensor ON>

Paper entry sensor: Machine position JAM LED

Duplex sensor: SPF JAM LED

Paper exit sensor: JAM LED

No. 2 cassette transport sensor: No. 2 cassette position JAM LED

No. 3 cassette transport sensor: No. 3 cassette position JAM LED

No. 4 cassette transport sensor: No. 4 cassette position JAM LED

41

2

OC document sensor
adjustment

Used to read the document sensor input value with paper and perform
the sensor detection level adjustment. For the adjustment procedure of
the document sensor input value, refer to the previous descriptions.

AR-160/160 FM/E [8] SIMULATION 12/1/1998

AR-161

8 – 7

Main
code

Sub

code

Contents

Details of operation

Initial
value

Set range

41

3

Document sensor light
reception level display

Used to display the light reception level and the detection level of the
document sensor. (The sensor level adjusted with SIM 41-2 is dis-
played.)

Key operation

Display

Light reception/Detection
level select: Magnification
ratio display key

Display at the 3rd digit

"A":

Light reception level display

"b":

Document detection level
lighting LED

Sensor select: Magnification
ratio select key

Sensor A: A3 document size LED

Sensor B: A4 document size LED

Sensor C: A4R document size LED

Sensor D: B4 document size LED

42

1

Developer counter clear

Used to clear the developer counter. 

∗

2

43

1

Fusing temperature setting

Used to display the current setting of the fusing temperature with the
number at right. After selecting the fusing temperature with the mag-
nification ratio display key, press the start key, and the set value is
stored.

Key operation

Fusing temperature select: Magnification ratio display  key

46

1

Copy density level
adjustment

After completion of warmup, shading is performed and the currently set
copy density level is displayed. For the adjustment procedure, refer to
the previous descriptions.

1 ~ 99

Key operation

Display

Mode select: Mode select key

<LED lighting at each mode selection>

Auto mode: AE LED

Manual mode: TEXT LED

Photo mode: PHOTO LED

Toner save mode: TEXT/PHOTO LED

2

FAX density level
adjustment

After completion of warmup, shading is performed and the currently set
FAX density level is displayed. For the adjustment procedure, refer to the
previous descriptions.

1 ~ 99

Key operation

Display

Mode select: 
    Mode 

select 

key

<LED lighting at each mode selection>

Standard mode: Standard LED

Small character mode: 
  Small character LED

Fine mode: Fine LED

Ultra fine mode: Ultra fine LED

Photo mode: Photo LED

48

1

Main scanning (front/rear)
direction magnification
ratio adjustment
(Copy/FAX/OC-SPF
common)

After completion of warmup, shading is performed and the currently set
main scanning (front/rear) direction magnification ratio adjustment is per-
formed. For the adjustment procedure, refer to the previous descriptions.

1 ~ 99

Key operation

Display

Adjustment mode select:
Magnification ratio key

Auto magnification ratio adjustment: 
 AE 

LED

Manual main scanning
direction magnification
ratio adjustment

Manual magnification ratio adjustment:
 TEXT 

LED

Set value: Numeric keys

∗

1: Each counter display method

To display 12345: 123 (0.75 sec) 

→

 Blank (0.35sec) 

→

 456 (0.75 sec) 

→

 Blank (1.0 sec) 

→

 repetition

∗

2: Display after clearing each counter 

000 (0.75 sec) 

→

 Blank (0.35sec) 

→

 000 (0.75 sec) 

→

 Blank (1.05 sec) 

→

 Repetition

AR-160/160 FM/E [8] SIMULATION 12/1/1998

AR-161

8 – 8

Main
code

Sub

code

Contents

Details of operation

Initial
value

Set range

48

2

OC mode sub scanning
direction magnification
ratio adjustment in copying

After completion of warmup, shading is performed and the currently set
OC mode sub scanning direction magnification ratio adjustment in copy-
ing is performed. For the adjustment procedure, refer to the previous
descriptions.

1 ~ 99

Key operation

OC mode sub scanning direction copy magnification ratio in copying:
Numeric keys

5

SPF mode sub scanning
direction magnification
ratio adjustment in copying

After completion of warmup, shading is performed and the currently set
OC mode sub scanning direction magnification ration adjustment in
copying is performed. For the adjustment procedure, refer to the pre-
vious descriptions.

1 ~ 99

Key operation

SPF mode sub scanning direction magnification ratio in copying:
Numeric keys

6

OC mode sub scanning
direction magnification
ratio adjustment in FAX

After completion of warmup, shading is performed and the currently set
OC mode sub scanning direction magnification ratio adjustment in FAX
is performed. For the adjustment procedure, refer to the previous
descriptions.

1 ~ 99

Key operation

OC mode sub scanning direction magnification ratio in FAX: Numeric
keys

7

SPF mode sub scanning
direction magnification
ratio adjustment in FAX

After completion of warmup, shading is performed and the currently set
SPF mode sub scanning direction magnification ratio in FAX is per-
formed. For the adjustment procedure, refer to the previous descriptions.

1 ~ 99

Key operation

SPF mode sub scanning direction magnification ratio in FAX:
Numeric keys

50

1

Copy image position
adjustment

After completion of warmup, shading is performed and the currently set
value is displayed. For the adjustment procedure, refer to the previous
descriptions.

1 ~ 99

Key operation

Display

Adjustment mode select:

Auto: Laser radiation timing adjustment

Exposure mode select key

Manual: Lead edge void adjustment

Set value: Numeric keys

Photo: Left edge void adjustment

Auto + Manual + Photo: 
     Rear 

edge 

void 

adjustment

10

Paper off center
adjustment

After completion of warmup, shading is performed and the currently set
off center adjustment of each paper feed port is displayed. For the
adjustment procedure, refer to the previous descriptions.

Key operation

Display

Paper feed port tray select: 
 Paper 

select 

key

Main cassette: 
  Main cassette select LED

Off center adjustment value: 
 numeric 

keys

Manual paper feed: 
  Manual feed select LED

No. 2 cassette: 
  No. 2 cassette select LED

No. 3 cassette: 
  No. 3 cassette select LED

No. 4 cassette: 
  No. 4 cassette select LED

AR-160/160 FM/E [8] SIMULATION 12/1/1998

AR-161

8 – 9