DOWNLOAD Sharp AR-122E (serv.man55) Service Manual ↓ Size: 176.85 KB | Pages: 6 in PDF or view online for FREE

Model
AR-122E (serv.man55)
Pages
6
Size
176.85 KB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Copying Equipment / Sect. 6 Troubleshooting
File
ar-122e-sm55.pdf
Date

Sharp AR-122E (serv.man55) User Manual / Operation Manual ▷ View online

30
6
2
Gently remove the misfed paper 
from under the fusing unit as 
shown in the illustration. If the 
paper cannot be removed, proceed 
to "C: Misfeed in the transport 
area".
3
Raise the fusing unit release lever and then close the side 
cover by pressing the round projections near the side cover 
open button. The misfeed (
) indicator will go out and the start 
(
) indicator will light up.
C: Misfeed in the transport area
1
Lower the fusing unit release lever.
See "B: Misfeed in the fusing area" (p.29).
2
Open the front cover.
To open the front cover, see "TONER CARTRIDGE REPLACEMENT" 
(p.21).
3
Rotate the feeding roller in 
the direction of the arrow 
and gently remove the 
misfed paper from the exit 
area.
The fusing unit is hot. Do not 
touch the fusing unit when 
removing misfed paper. Doing 
so may cause a burn or other 
injury.
• Do not touch the photoconductive drum (green portion) when 
removing the misfed paper. Doing so may cause smudges on 
copies.
• Do not remove the misfed paper from above the fusing unit. 
Unfixed toner on the paper may stain the paper transport 
area, resulting in smudges on copies.
Feeding roller
31
6
4
Raise the fusing unit release lever, close the front cover and 
then close the side cover by pressing the round projections 
near the side cover open button. The misfeed (
) indicator will 
go out and the start (
) indicator will light up.
DEVELOPER REQUIRED
When the developer replacement  required (
) indicator lights up, the developer 
should be replaced. DEVELOPER REPLACEMENT SHOULD ONLY BE DONE BY 
AN AUTORIZED SHARP SERVICE TECHNICIAN. Contact your service centre as 
soon as possible.
MAINTENANCE REQUIRED
When  maintenance (
) indicator lights up, service by an authorised SHARP 
service technician is required. Contact your service centre as soon as possible.
31
6
4
Raise the fusing unit release lever, close the front cover and 
then close the side cover by pressing the round projections 
near the side cover open button. The misfeed (
) indicator will 
go out and the start (
) indicator will light up.
DEVELOPER REQUIRED
When the developer replacement  required (
) indicator lights up, the developer 
should be replaced. DEVELOPER REPLACEMENT SHOULD ONLY BE DONE BY 
AN AUTORIZED SHARP SERVICE TECHNICIAN. Contact your service centre as 
soon as possible.
MAINTENANCE REQUIRED
When  maintenance (
) indicator lights up, service by an authorised SHARP 
service technician is required. Contact your service centre as soon as possible.
31
6
4
Raise the fusing unit release lever, close the front cover and 
then close the side cover by pressing the round projections 
near the side cover open button. The misfeed (
) indicator will 
go out and the start (
) indicator will light up.
DEVELOPER REQUIRED
When the developer replacement  required (
) indicator lights up, the developer 
should be replaced. DEVELOPER REPLACEMENT SHOULD ONLY BE DONE BY 
AN AUTORIZED SHARP SERVICE TECHNICIAN. Contact your service centre as 
soon as possible.
MAINTENANCE REQUIRED
When  maintenance (
) indicator lights up, service by an authorised SHARP 
service technician is required. Contact your service centre as soon as possible.
Page of 6
Display

Sharp AR-122E (serv.man55) User Manual / Operation Manual ▷ Download