Sharp AR-120E (serv.man2) Handy Guide ▷ View online
Options
Version 2.0
Issue 05/00
5
SHARP ELECTRONICS (UK) LTD
COPIER TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
Options
AR-120E/121E
AL11PK
GDI Printer interface kit (Parallel port only).
AR-150/151
ARDE9
1 x 250 sheet paper tray.
ARPB9M
Printer interface kit PCL6. Supports Windows
3.1x/95/98/NT4.0 (Parallel and USB Connectors)
3.1x/95/98/NT4.0 (Parallel and USB Connectors)
ARPG1M GDI Printer interface kit. Supports Windows
3.1x/95/98/NT 4.0 (Parallel and USB Connectors)
ARSP3
30 Sheet single pass document feeder.
ARF151
ARDE9
1 x 250 sheet paper tray.
ARPG1M GDI Printer interface kit. Supports Windows
3.1x/95/98/NT 4.0 (Parallel and USB Connectors)
AR155/156
ARDE9
1 x 250 sheet paper tray.
ARPB9M
Printer interface kit PCL6. Supports Windows
3.1x/95/98/NT4.0 (Parallel and USB Connectors)
3.1x/95/98/NT4.0 (Parallel and USB Connectors)
ARPG1M GDI Printer interface kit. Supports Windows
3.1x/95/98/NT 4.0 (Parallel and USB Connectors)
Routine Maintenance
Version 2.0
Issue 05/00
6
SHARP ELECTRONICS (UK) LTD
COPIER TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
DEVELOPER SETUP
The toner/developer cartridge is self setting. No set-up
procedure is required.
procedure is required.
Sim 25 – 01 Main motor check
LASER PRINT HORIZONTAL IMAGE CHECK
Sim 64 – 01 Laser print check
LASER PRINT & ORIGINAL OFF CENTRE
Sim 50 – 10 Adjusts print centre offset (paper,OC & SPF)
Sim 50 – 18 Duplex reverse print adjust
Sim 50 – 19 Duplex rear edge adjust
Sim 50 – 18 Duplex reverse print adjust
Sim 50 – 19 Duplex rear edge adjust
COPY IMAGE POSITION & VOID
Sim 50 – 01 Copy lead and trail edge adjust ( all
cassettes )
cassettes )
COPY QUALITY
Sim 46 – 01 Adjust Copy Mode ( All )
Sim 46 - 12 ~ 16 Fax exposure adjustment.
Sim 66 - No subcode Fax panel simulation
Sim 46 - 12 ~ 16 Fax exposure adjustment.
Sim 66 - No subcode Fax panel simulation
CASSETTE SIZES
Set cassette sizes as per Service Manual page 5-3
OTHER
Sim 21 – 01 Maintenance Cycle Setting
Sim 26 – 06 Destination Setting
Sim 26 – 47 Fax rear edge scan set up
Sim 26 – 06 Destination Setting
Sim 26 – 47 Fax rear edge scan set up
Routine Maintenance
Version 2.0
Issue 05/00
7
SHARP ELECTRONICS (UK) LTD
COPIER TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
Although traditional routine maintenance is not required with these models, the
following items may require attention when making a routine visit at the interval set in
Sim 21-01.
following items may require attention when making a routine visit at the interval set in
Sim 21-01.
MAINTENANCE COMPLETED
Sim 20 – 01 Maintenance Counter Reset
Sim 21 – 01 Maintenance Setting Check
Sim 21 – 01 Maintenance Setting Check
DRUM REPLACEMENT
Sim 24 – 07 Drum Membrane Counter Reset
COPY QUALITY
Sim 46 – 01 Copier Mode Adjust
JAM & TROUBLE COUNTER
Sim 24 – 01 Jam memory, Jam counter clear
Sim 24 - 14 SPF jam memory clear
Sim 24 - 14 SPF jam memory clear
Machine Settings and
Adjustments
Version 2.0
Issue 05/00
8
SHARP ELECTRONICS (UK) LTD
COPIER TECHNICAL SUPPORT
TECHNICAL SERVICES GROUP
SECTION
ADJUSTMENT ITEM
ADJUSTMENT
PROCEDURE
Process
1 Developer bias check
Sim 8-1 (-400v)
2 Grid bias check
Sim 8-2/3 (400 / 580v)
Laser scanner
1 Front/rear magnification
Sim 48 – 01
2 Print off centre
Sim 50-10
Scanner
1 Vertical image distortion balance
Copy lamp unit installing
position
position
2 Vertical image distortion balance
No2/3 mirror base installing
position
position
3 Vertical image distortion
Winding pulley position
4 Horizontal image distortion
F rail height adjust
5 Main scan magnification ratio
CCD unit position
6 Main scan magnification ratio
Sim 48-1
7 Original off centre
Sim 50-10
Copy Density
1 Copy mode
Sim 46 – 01
Paper Transport
1 Resist Roller Buckle
Sim 51-2
Click on the first or last page to see other AR-120E (serv.man2) service manuals if exist.