Sharp AL-1644 (serv.man17) User Manual / Operation Manual ▷ View online
11
BEFORE USING THE MACHINE
1
ORIGINAL SIZE ENTER key (
) / ORIGINAL
SIZE indicators
Use to enter the original size. (p.19) The selected
original size will light up.
original size will light up.
PAPER SIZE indicators
Light up to show the selected copy paper size. (p.19)
PAPER SIZE ENTER key (
)
Use to set the paper size in the paper trays. (p.19)
SPF indicator (only on the SPF model)
Lights up when originals are set in the document
feeder tray. (p.22)
feeder tray. (p.22)
TRAY SELECT key (
)
Use to manually select a paper tray. (p.24)
AUTO IMAGE key (
) / indicator
Press for automatic copy ratio selection. (p.25)
Paper feed location / misfeed location
indicators
indicators
The selected paper feed location is shown by a lit
indicator (
indicator (
). (p.24)
The general location of misfed paper is shown by a
blinking red indicator (
blinking red indicator (
). (p.54)
PRESET RATIO selector keys (
,
)
/ indicators
Use to select preset reduction/enlargement copy
ratios. (p.26)
ratios. (p.26)
[
] key
Use to check the total number of pages scanned.
(p.64)
(p.64)
Numeric keys
Use to select the desired copy quantity or to make
user program entries. (p.25)
To display the total number of pages output by the
machine, hold the [0] key down. (p.64)
user program entries. (p.25)
To display the total number of pages output by the
machine, hold the [0] key down. (p.64)
[
] key
Use to check the total number of copies made (p.64).
START key (
) /indicator
Press to make a copy (p.21). Also press to exit
"Auto power shut-off" mode and to set a user
program. Copying is possible when the indicator is
on.
"Auto power shut-off" mode and to set a user
program. Copying is possible when the indicator is
on.
CLEAR ALL key (
)
Clears all selected settings and returns the
machine to the initial settings. (p.15)
machine to the initial settings. (p.15)
CLEAR key (
)
Clears the copy quantity display or terminates a
copy run.
copy run.
INTERRUPT
ZOOM
1 3 5
25 400%
AUTO
ENTER
AUTO
ACC.#-C
AUTO
%
A3
A4
A4
A5
B4
A4
A4
A5
B4
EXTRA
200%
50%
141
86
81
70
70
122
115
100%
6
7
8
9
10
11
12
13
14
15
16
17
18 19 20 21
22
23
24
25
26
27
28
29 30
(Two-tray model only)
17
ENTER
18
19
20
21
22
AUTO
%
23
24
25
26
27
28
29
30
AL-1633_1644_EX.book 11 ページ ２００３年１０月２３日 木曜日 午後８時２１分
12
CHECKING PACKED COMPONENTS
AND ACCESSORIES
AND ACCESSORIES
Open the carton and check to ensure that the following components and accessories are included.
UNPACKING
Be sure to lift by the handles on both sides of the machine by two persons to unpack the machine and carry it to the
installation location.
installation location.
Machine
Operation manual
and software CD-ROM
and software CD-ROM
Power cord
Drum cartridge
(installed in machine)
TD cartridge
• If anything is not included or is damaged, contact your authorised service representative.
• Save the carton and packing materials. These can be re-used for transporting the machine, should it be
• Save the carton and packing materials. These can be re-used for transporting the machine, should it be
necessary.
Note
AL-1633_1644_EX.book 12 ページ ２００３年１０月２３日 木曜日 午後８時２１分
13
1
SET-UP
1
Remove all pieces of tape, then open
the SPF or the document cover and
remove the protective material.
the SPF or the document cover and
remove the protective material.
2
Use a coin (or other suitable object) to
remove the screw.
remove the screw.
3
Install the TD cartridge.
For installation of the TD cartridge, see the next
page.
page.
4
Gently lift and pull out the paper tray
until it stops.
until it stops.
5
Remove the pressure plate lock.
Rotate the pressure plate lock in the
direction of the arrow to remove it
while pressing down the pressure
plate of the paper tray.
Rotate the pressure plate lock in the
direction of the arrow to remove it
while pressing down the pressure
plate of the paper tray.
6
Store the pressure plate lock which
has been removed in step 5 and the
screw which has been removed in
step 2 in the front of the paper tray.
has been removed in step 5 and the
screw which has been removed in
step 2 in the front of the paper tray.
To store the pressure
plate lock, rotate the lock
to fix it on the relevant
location.
For two-tray model,
follow steps 4 to 6 for
both the upper and lower
trays except for storage
of the screw.
plate lock, rotate the lock
to fix it on the relevant
location.
For two-tray model,
follow steps 4 to 6 for
both the upper and lower
trays except for storage
of the screw.
7
Ensure that the power switch of the
machine is in the OFF position. Plug
the power cord into the nearest outlet.
machine is in the OFF position. Plug
the power cord into the nearest outlet.
Store the screw in the paper tray as described
in step 6 because it must be used if the
machine has to be moved. (p.69)
in step 6 because it must be used if the
machine has to be moved. (p.69)
Note
• If you use the machine in a country other
than the country where the machine was
purchased, you will need to make sure that
your local power supply is compatible with
your model. If you plug the machine into an
incompatible power supply, severe damage
to the machine will result.
purchased, you will need to make sure that
your local power supply is compatible with
your model. If you plug the machine into an
incompatible power supply, severe damage
to the machine will result.
• Only insert the power cord into a properly
grounded wall socket. Do not use extension
cords or power strips.
cords or power strips.
Connect the machine to a power outlet which
is not used for other electric appliances. If a
lighting fixture is connected to the same
outlet, the light may flicker.
is not used for other electric appliances. If a
lighting fixture is connected to the same
outlet, the light may flicker.
Pressure
plate lock
plate lock
Screw
Caution
Note
AL-1633_1644_EX.book 13 ページ ２００３年１０月２３日 木曜日 午後８時２１分
14
INSTALLING THE TD CARTRIDGE
1
Push gently on both ends of the front
cover and open it.
cover and open it.
2
Remove the new TD cartridge from the
bag. Hold the cartridge on both sides
and shake it horizontally four or five
times.
bag. Hold the cartridge on both sides
and shake it horizontally four or five
times.
3
Remove the protective cover from the
TD cartridge by unlatching three
cover hooks from the holes on the
cartridge and then pulling the cover in
the direction indicated by the arrow in
the illustration.
TD cartridge by unlatching three
cover hooks from the holes on the
cartridge and then pulling the cover in
the direction indicated by the arrow in
the illustration.
4
Insert the TD cartridge along the
guides until it locks in place.
guides until it locks in place.
If there is any dirt or dust
on the TD cartridge,
remove it before
installing the cartridge.
on the TD cartridge,
remove it before
installing the cartridge.
5
Close the front cover.
The TD cartridge
replacement required
indicator (
replacement required
indicator (
) will go out.
4 or 5 times
• Before closing the front cover, make sure
that the TD cartridge is correctly installed.
• When closing the front cover, gently hold
both ends.
Note
AL-1633_1644_EX.book 14 ページ ２００３年１０月２３日 木曜日 午後８時２１分
Click on the first or last page to see other AL-1644 (serv.man17) service manuals if exist.