Sharp PN-V602 (serv.man6) Service Manual ▷ View online
ii
CHAPTER 7.
TROUBLESHOOTING
TROUBLESHOOTING
1 THE POWER IS NOT SUPPLIED (THE LED DOES
NOT LIGHT UP)
7 - 2
2 OPTIONAL POWER IS NOT TURNED ON
7 - 3
3 THE REMOTE CONTROL DOES NOT WORK
7 - 3
4 THE DISPLAY DOESN’T SHOW/ DISPLAY
ABNORMALITY
7 - 4
5 NO IMAGE IS DISPLAYED/ DISPLAY FAILURE
(EXTENSION INTERFACE)
7 - 5
6 THE BACKLIGHT DOES NOT LIGHT UP
7 - 6
7 THE BACK LIGHT IS DARK
7 - 7
8 SOUND IS NOT REPRODUCED/ REPRODUCED
SOUND ABNORMALITY (DISPLAY)
7 - 7
9 NO SOUND COMES OUT/ REPRODUCED SOUND
FAILURE (EXTENSION INTERFACE)
7 - 8
10 THE FAN DOESN’T ROTATE
7 - 8
11 DAISY CHAIN IS NOT MADE / DISPLAY ABNORMALITY
(EXTENSION INTERFACE)
7 - 9
12 RS-232C CONTROL DOESN’T WORK
7 - 9
13 LAN CONTROL DOESN’ T WORK
(EXTENSION INTERFACE)
7 - 10
14 THE RED LED BLINKS (HARDWARE ERROR) 7 - 11
15 THE LED LIGHTS UP IN ORDER OF RED
3 GREEN
(TEMPERATURE ERROR)
7 - 11
CHAPTER 8.
HARDWARE DESCRIPTIONS
HARDWARE DESCRIPTIONS
1 CIRCUIT DESCRIPTIONS
8 - 1
2 LOCAL DIMMING FUNCTION
8 - 7
3 FAN
8 - 9
4 BLOCK DIAGRAM
8 - 10
5 ACTUAL WIRING DIAGRAM
8 - 11
6 CONNECTOR TABLE
8 - 13
7 CIRCUIT DIAGRAM
8 - 27
8 PARTS LAYOUT
8 - 46
PN-V602 OUTLINE OF THE PRODUCT
1 – 1
CHAPTER 1. OUTLINE OF THE PRODUCT
1. SPECIFICATIONS
1 - 1. OUTLINE
Model
PN-V602
PN-V601
LCD component
60” Class [60 inch (152.4cm) diagonal] TFT LCD
Max. resolution (pixels)
1366 x 768
Max. colors
Approx. 16.77 M colors
Pixel pitch
0.973 mm (H) x 0.973 mm (V)
Viewing angle
176°C right/left/up/down (contrast ratio >10)
Screen active area inch (mm)
52-5/8 x 29-7/16 (1328.8 x 747.1)
Computer input signal
n
Digital (DVI 1.0 standard-compliant)
n
Analog RGB (0.7 Vp-p) [75
Ω]
Sync signal
n
Horizontal/vertical separate (TTL: positive/negative)
n
Sync-on-green
n
Composite sync (TTL: positive/negative)
Video color system
NTSC (3.58MHz)/NTSC (4.43MHz)/PAL/PAL-60/SECAM
Plug and play
VESA DDC2B
Power management
n
VESA DPMS
n
DVI DMPM
Input terminals
PC/AV
Digital
HDMI x 1
PC
Analog
Mini D-sub 15 pin, 3 rows x 1
Audio
3.5 mm mini stereo jack x 1
Serial (RS-232C)
D-sub 9 pin x 1
When PN-ZB02
(optional) is attached
(optional) is attached
PC/AV
Digital
DVI-D 24 pin (HDCP compatible) x 1
PC
Analog
BNC
*1 *2
x 1
AV
Composite video
BNC x 1
S-video
x 1
Component
BNC (Y, Cb/Pb, Cr/Pr)
*1
x 1
Audio
RCA pin (L/R) x 2
Output terminals
Audio
RCA pin (L/R) x 1
Serial (RS-232C)
D-sub 9 pin x 1
When PN-ZB02
(optional) is attached
(optional) is attached
PC/AV
Digital
DVI-D 24 pin x 1
External speaker
10 W + 10 W [6
Ω]
LAN terminal [When PN-ZB02 (optional) is attached]
10 BASE-T/100 BASE-TX
Power requirement
AC 100 V - 240 V, 50/60 Hz
Operating temperature
*3
32°F to 104°F (0°C to 40°C)
Operating humidity
20% to 80% (no condensation)
Power consumption (maximum / input signal waiting
mode
*4
/ standby mode
*5
)
510W/1.0W/1.0W
480W/1.6W/1.8W
Power consumption [PN-ZB02 (optional)]
530W
490W
Dimensions (excluding protrusions) inch (mm)
Approx. 52-5/8 (W) x 5-7/8 (D) x 29-11/16 (H) (1335.9 x 149.3 x 754.2)
PN-ZR01 (optional) (Remote control sensor box )
inch (mm)
inch (mm)
Approx. 1-3/8 (W) x 7/8 (D) x 5-1/8 (H) (34.2 x 23 x 130)
Weight lbs. (kg)
Approx. 77.2 (44)
PN-ZB02 (optional) lbs. (kg)
Approx. 1.102 (0.5)
PN-ZR01 (optional) (Remote control sensor box )
lbs (kg)
Approx. 0.220 (0.1)
CHAPTER 1. OUTLINE OF THE PRODUCT
PN-V602 OUTLINE OF THE PRODUCT
1 – 2
*
1
Cannot be used simultaneously.
*
2
Does not support plug and play.
*
3
Temperature condition may change when using the display together with the optional equipments recommended by SHARP.
In such cases, please check the temperature condition specified by the optional equipments.
In such cases, please check the temperature condition specified by the optional equipments.
*
4
When “AUTO INPUT CHANGE” is set to “OFF”.
*
5
When “STANDBY MODE” is set to “STANDARD”. When “STANDBY MODE” is set to “LOW POWER”: 0.5 W.
1 - 2. DIFFERENCE BETWEEN PN-V602 AND PN-V601
PN-V602
PN-V601
LCD type
UV
2
A
ASV
Max. brightness
1500cd/m
2
700cd/m
2
(When shipping: 500cd/m
2
)
Local dimming
Yes
No
Contrast ratio
5000: 1 (without local dimming)
1,000,000: 1 (Local dimming High)
2400:1
Functions of mini D-SUB 15pin
n
PC (Analog)
n
Composite video
n
Component
*
Select from the menu.
*
Only one series from the PN-ZB02 or either one.
PC (Analog)
Handle
7mm higher
Flat surface
*
When the handle spacer 7mm is removed, it is same
as the V601.
---
Fan
10
*
+2 The fan for stirring is added.
The fan cover is also added to the back.
8
Splash screen
Yes
No
Schedule function
Yes
The brightness adjustment is also enabled.
The brightness adjustment is also enabled.
(Brightness adjustment for time zones)
Yes
Color mode
Yes (High luminance mode added)
Yes
P-IN-P size
1 - 64
1 - 12
Package weight
56kg
55kg
CHAPTER 1. OUTLINE OF THE PRODUCT
PN-V602 OUTLINE OF THE PRODUCT
1 – 3
1 - 3. DIMENSIONAL DRAWINGS
■ PN-V602
When mounting the monitor, be sure to use a wall-mount bracket that complies with the VESA-compatible mounting method.
SHARP recommends using M6 screws and tighten the screws.
Note that screw hole depth of the monitor is 3/8 inch (10 mm). Loose mounting may cause the product to fall, resulting in serious personal injuries as
well as damage to the product. The screw and hole should come together with over 5/16 inch (8 mm) length of thread. Use a bracket which has been
well as damage to the product. The screw and hole should come together with over 5/16 inch (8 mm) length of thread. Use a bracket which has been
approved for UL1678 standard, and which can endure at least 4 times or more the weight of the monitor.
■ PN-ZR01
Unit: inch [mm]
52-5/8 [1335.9]
Opening width (52-5/16 [1329.4])
Opening height
(2
9
-7/16 [747.7])
2
9
-11/16 [754.2]
7-7/8 [200]
5-7/8
[149.3]
52-5/8 [1335.9]
3-5/8
[92.3]
7-7/8
[200]
7-7/8
[200]
*1
3-15/16
[100]
3-15/16
[100]
VESA
holes
holes
3
3
42
34
34.2
38.8
18.8
2
9
.71
19
11
130
6
34.4
29
1.4
46.4
31
Remote control
sens
sens
(Unit: mm)
