Sharp PN-R903 Handy Guide ▷ View online
Using elevator(carrying the display in vertical orientation with package) 13
Take PN-R903 on the elevator with converting package 3/3
【
Taking PN-R903 in and out the elevator】
- Slide PN-R903 with blue sheet and take it on the elevator.
*Please certainly spread the curing sheet to protect the floor.
PN-R903 Installation Guidelines <Rev1.0> February 2013
CONFIDENTIAL
32
- Take PN-R903 out the elevator with same method and put off the converting package.
Precautions for attachment
VESA compliant Mounting bracket for display (M6 screw)
-Please take attention to the following items for using screw holes on the back of IDP.
1) Please use at least 4 mounting screws to fix the display
1) Please use at least 4 mounting screws to fix the display.
2) Please use symmetrical screw holes across the centre line.
2) Please use symmetrical screw holes across the centre line.
*It can cause malfunction or deformation of the display in case of using screw holes asymmetrically.
3)Please use a mounting bracket having less than or equal to 7.5mm hole diameter.
*O
i
f h l di
t
f t i
f th
ti
t b th
ti
*Oversize of hole diameter can cause unfastening of the captive nut by the mounting screw.
4)Please use screws which is correct length written in the operation material of display.
*Over length of screw can cause unfastening of the captive nut by the mounting screw.
5)Please certainly take some kind of measures to prevent the screws loosening.
(For example : using screws with washer)
6) Please tighten screws hard within 3N*m strength.
(Tightening torque: 3N*m )
Length of screw : 8mm-10mm
H l di
t
f
ti
b
k t
600
VESA pitch of PN-R903 is different from previous displays.
Hole diameter for mounting bracket
(less than or equal to 7.5mm)
(less than or equal to 7.5mm)
Screw (M6)
back
400 600
Mounting bracket
Rear cover of display
Captive nut for
fixing
PN-R903 Installation Guidelines <Rev1.0> February 2013
CONFIDENTIAL
33
back
Rear cover of display
Installation tool
Name (temporary)
Use
Image
We will provide following service parts for installation (they are subject to fees)
Installation handle
(UKOG-1005MPZZ)
- For lifting the PN-R903 up to a high location
This device is inserted into holes on top of PN-R903
and enable lifting the PN-R903 up to a high location
during installation.
during installation.
2 pieces of this device are necessary per one PN-R903.
This installation handle is for improving efficiency of
This installation handle is for improving efficiency of
installation. Please use it if necessary.
I
t ll ti
id h
dl
F
lifti
th PN R903
t
hi h l
ti
Installation side handle
unit
unit
(UKOG-1014MPZZ)
- For lifting the PN-R903 up to a high location
This device is inserted into holes on top of PN-R903
and enable lifting the PN-R903 up to a high location
during installation.
during installation.
2 pieces of this device are necessary per one PN-R903.
Shape is difference from installation handle(UKOG-
1005MPZZ)
This installation handle is for improving efficiency of
1005MPZZ)
This installation handle is for improving efficiency of
p
g
y
installation. Please use it if necessary.
Interlocking pipe
(UKOG-1006MPZZ)
- For a crane to lift the PN-R903 up to a high location.
This device is inserted into holes on top of PN-R903
d
bl lifti
th PN R903
b
and enable lifting the PN-R903 up by crane.
2 pieces of this device are necessary per one PN-R903.
This installation eyebolt device is for improving the
This installation eyebolt device is for improving the
efficiency of installation. Please use it if necessary.
PN-R903 Installation Guidelines <Rev1.0> February 2013
CONFIDENTIAL
34
*Using above tools to the display with protection glass is impossible.
* if you need above tools, please contact delivery agent or our sales reps.
Precautions for installing protection glass
Precautions for installing protection glass
Please read deeply the setup manual for
PN-ZH903
when installing them.
- After installing the protection glass, the range temperature for around the display must be within
0 - 35℃
.
- Minimum 2 persons are required for installing the protection glass. It is big and heavy so please install it carefully.
- The protection glass for PN-ZH903 is attached with a frame but for PN-E802/E702/E602/E601/E521/E471R/E421 have only
p
g
y
protection glass.
- Please wear clean gloves for installing the protection glass to prevent the glass and LCD panel from fingerprints or dirt.
- Please make sure all the screws are lock tight with screwdriver. Do not use impact driver.
- Be aware that after installing the protection glass, you can no longer use the original display package for shipment.
Protection Glass 【PN-ZH903】
<Reference>
P
i
Gl
f PN E802/E702/
Protection Glass
(with frame)
Protection Glass 【PN-ZH903】
Protection Glass of PN-E802/E702/
E602/E601/E521/E471R/E421
The structure for the model above is to lay the
display facing up, remove the front bezel, attach
display facing up, remove the front bezel, attach
Protection Glass
p y
g p,
,
the protection glass to the display and reattach
the front bezel. This is different for model PN-
R903.
the front bezel. This is different for model PN-
R903.
- The structure for protection
glass with frame is to overlay the
glass with frame is to overlay the
Display
glass to the display.
- The screws for this glass are
from the side of the display so it is
possible to install it for both wall-
- The screws for this glass are
from the side of the display so it is
possible to install it for both wall-
t d
d ith
t d
PN-R903 Installation Guidelines <Rev1.0> February 2013
CONFIDENTIAL
35
Display
mounted and with a stand.
Click on the first or last page to see other PN-R903 service manuals if exist.