Sharp PN-L802B (serv.man2) Handy Guide ▷ View online
PN-L802B Installation Guidelines <Rev1.0> February 2012
CONFIDENTIAL
The space to carry in
16
Precautions for handling package of floor stand/carrying after construction 2
1. The space to carry in
Please carry the main body with wheeled platform to the installation place.
The following space is necessary to pass through with wheeled platform
(wheeled platform size : Width : 300mm or less, height : 150mm or less)
Carrying after construction doesn’t need wheeled platform.
The main body
wall
ceiling
Width
Height
Package
*
500mm or more
1,250mm or more
After construction
1,050mm
or more
1,850mm or more
(without display)
2,150mm or more
(with display)
Space
Package
*
1,200mm or more
After construction
1,750mm or more
Package : 1,200mm
After construction : 1,750mm
After construction : 1,750mm
Package : 1,200mm
After construction : 1,750mm
After construction : 1,750mm
Package : 1,250mm
Package : 500mm
After construction : 1,050mm
After construction : 1,850mm(without display)
2,150mm(with display)
2,150mm(with display)
wall
wall
Wheeled platform
wall
wall
wall
•Assumption of temporary
portrait orientation for
transportation.
Please keep properly position
portrait orientation for
transportation.
Please keep properly position
when it’s carried by truck or
stored for long period.
2. The space of the corner
When there is a corner on the carrying course,
1,200mm/1,750mm or more width
(Package/after construction) is necessary.
Caution : Please do not hit the side of package
to the corner.
PN-L802B Installation Guidelines <Rev1.0> February 2012
CONFIDENTIAL
Precautions for attachment
-Please take attention to the following items for using screw holes on the back of IDP.
1) Please use at least 4 mounting screws to fix the display.
2) Please use symmetrical screw holes across the centre line.
*It can cause malfunction or deformation of the display in case of using screw holes asymmetrically.
3)Please use a mounting bracket having less than or equal to 7.5mm hole diameter.
*Oversize of hole diameter can cause unfastening of the captive nut by the mounting screw.
4)Please use screws which is correct length written in the operation material of display.
*Over length of screw can cause unfastening of the captive nut by the mounting screw.
5)Please certainly take some kind of measures to prevent the screws loosening.
(For example : using screws with washer)
6) Please tighten screws hard within 3N*m strength.
(Tightening torque: 3N*m )
VESA compliant Mounting bracket for display (M6 screw)
VESA compliant screw holes
Screw holes
Length of screw : 8mm-10mm
Hole diameter for mounting bracket
(less than or equal to 7.5mm)
(less than or equal to 7.5mm)
Screw (M6)
Mounting bracket
Rear cover of display
Captive nut for
fixing
fixing
17
PN-L802B Installation Guidelines <Rev1.0> February 2012
CONFIDENTIAL
Treatment of USB cable
Connection with USB cable
18
Connection to touch panel
To use touch panel, it is necessary to connect USB cable to a
computer and install the touch panel driver.
computer and install the touch panel driver.
1. Boot a computer.
2. Connect the display and the computer by USB cable.
When the cable is connected, this display will be
recognized automatically
3. Install the touch panel driver from accompanying CD-ROM
* Regarding installation of the touch panel driver, please refer to
the its user instruction.
Please fasten USB cable with attached cable clamps.
1. Make double circle with a diameter of about 4 cm at the
15cm point from a mini USB connector.
2. Attach a cable clamp on the fixed area next to USB port.
3. Fasten USB cable with circled cable clamp.
※This is a image looked from underside of
this product
this product
At the first installation,
please execute 25 points
calibration with touch pen.
please execute 25 points
calibration with touch pen.
To USB port
of computer
of computer
USB cable
USB cable (accessories)
PN-L802B Installation Guidelines <Rev1.0> February 2012
CONFIDENTIAL
19
Optional accessories
Available optional accessories
Following list shows available optional accessories for PN-L802B
Special floor stand
Touch application
button
Expansion board for
interface
PN-L802B
PN-ZS80F *
PN-ZC01
PN-ZB01
*The availability depends on region and please ask SHARP sales window.
Click on the first or last page to see other PN-L802B (serv.man2) service manuals if exist.