DOWNLOAD Sharp PN-655E (serv.man5) Service Manual ↓ Size: 1.25 MB | Pages: 64 in PDF or view online for FREE

Model
PN-655E (serv.man5)
Pages
64
Size
1.25 MB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Monitor
File
pn-655e-sm5.pdf
Date
PREV: Sharp PN-655E (serv.man4) Service Manual / Parts Guide

Sharp PN-655E (serv.man5) User Manual / Operation Manual ▷ View online

ENGLISH
55
E
■
 Power management
This monitor conforms to VESA DPMS (Display Power Management Signaling) and DVI DMPM (Digital
Monitor Power Management). Both your video card and computer must support the same standard in
order for the monitor’s power management function to work.
■
 DDC (plug and play)
The monitor supports the VESA DDC (Display Data Channel) standard.
DDC is a signal standard for plug and play between monitors and computers. Information about
resolution and other parameters is exchanged between the two. This function can be used if the
computer supports DDC and it has been configured to detect plug-and-play monitors.
There are several types of DDC, depending on the communication method used. This monitor supports
DDC2B.
Screen
DPMS
Hsync
Vsync
Power
consumption
Yes
Yes
No
No
Yes
No
Yes
No
ON STATE
STANDBY
SUSPEND
OFF STATE
Display
No 
display
550 W
2.0 W
Display
No display
Monitor ON
Active OFF
550 W
2.0 W
Screen
DMPM
Power
consumption
56
E
PC Digital/Analogue Signal Input Compatibility Chart
• Video
Analogue RGB (0.7 Vp-p) [75 
Ω
]
Conforms to DVI (digital visual interface) standard 1.0
• Sync
Horizontal/Vertical separate (TTL: positive/negative), Sync-on-green,
Composite sync (TTL: positive/negative)
• Supported frequencies
See the Compatible signal timing shown below.
VESA
Wide
US TEXT
Sun Ultra Series
Screen resolution
Hsync
Vsync
Dot frequency Analogue signal Digital signal
640 x 480
800 x 600
848 x 480
1024 x 768
1152 x 864
1280 x 768
1280 x 960
1280 x 1024
1360 x 768
1280 x 720
1920 x 1080
720 x 400
1024 x 768
1152 x 900
1280 x 1024
1600 x 1000
31.5 kHz
37.9 kHz
37.5 kHz
37.9 kHz
48.1 kHz
46.9 kHz
31.0 kHz
48.4 kHz
56.5 kHz
60.0 kHz
67.5 kHz
47.8 kHz
60.3 kHz
60.0 kHz
64.0 kHz
80.0 kHz
47.7 kHz
44.7 kHz
66.3 kHz
31.5 kHz
48.3 kHz
53.6 kHz
56.6 kHz
61.8 kHz
71.8 kHz
71.7 kHz
81.1 kHz
68.6 kHz
60 Hz
72 Hz
75 Hz
60 Hz
72 Hz
75 Hz
60 Hz
60 Hz
70 Hz
75 Hz
75 Hz
60 Hz
75 Hz
60 Hz
60 Hz
75 Hz
60 Hz
60 Hz
60 Hz
70 Hz
60 Hz
66 Hz
70 Hz
66 Hz
76.2 Hz
67.2 Hz
76 Hz
66 Hz
25.175 MHz
31.5 MHz
31.5 MHz
40.0 MHz
50.0 MHz
49.5 MHz
33.75 MHz
65.0 MHz
75.0 MHz
78.75 MHz
108.0 MHz
79.5 MHz
102.25 MHz
108.0 MHz
108.0 MHz
135.0 MHz
85.5 MHz
74.4 MHz
148.5 MHz
28.3 MHz
64.13 MHz
70.4 MHz
74.25 MHz
94.88 MHz
108.23 MHz
117.01 MHz
134.99 MHz
135.76 MHz
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
* All are compliant only with non-interlaced.
* Depending on the connected PC, images may not be displayed properly even if the compatible signal described
above is input.
* If the monitor is receiving timing signals that are not compatible, [OUT OF TIMING] may appear. In this case,
please change the setting so that the timing signals will be compatible with the monitor, according to your PC
manual.
* If the monitor is not receiving any signal (sync signal), [NO SIGNAL] will appear.
* The frequency values for the Sun Ultra Series are reference values. A separate conversion adapter (commercially
available) may be required for connecting the monitor to the Sun Ultra Series.
■
 Compatible signal timing
ENGLISH
57
E
Terminal Compatibility Charts
■
 PC digital RGB input terminal pins
(DVI-D 24 pin)
■
 PC analogue RGB input terminal pins
(Mini D-sub 15 pin)
No.
1
2
3
4
5
Function
N.C.
Transmitted data
Received data
Data terminal ready
GND
No.
6
7
8
9
Function
Data set ready
Request to send
Clear to send
N.C.
No.
1
2
3
4
5
Function
Carrier detect
Received data
Transmitted data
Data terminal ready
GND
No.
6
7
8
9
Function
Data set ready
Request to send
Clear to send
Ring indicator (open)
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Function
TMDS data 2-
TMDS data 2+
TMDS data 2/4 shield
N.C.
N.C.
DDC clock
DDC data
N.C.
TMDS data 1-
TMDS data 1+
TMDS data 1/3 shield
N.C.
N.C.
+5 V
GND
No.
16
17
18
19
20
21
22
23
24
Function
Hot-plug detection
TMDS data 0-
TMDS data 0+
TMDS data 0/5 shield
N.C.
N.C.
TMDS clock shield
TMDS clock+
TMDS clock-
No.
1
2
3
4
5
6
7
8
Function
Red video signal input
Green video signal input
Blue video signal input
N.C.
GND
GND for red video signal 
GND for green video signal
GND for blue video signal
No.
9
10
11
12
13
14
15
Function
+5 V
GND
N.C.
DDC data
Hsync signal input
Vsync signal input
DDC clock
■
 RS-232C input terminal pins
(D-sub 9 pin)
■
 PC digital RGB output terminal pins
(DVD-D 24 pin)
■
 RS-232C output terminal pins
(D-sub 9 pin)
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Function
TMDS data 2-
TMDS data 2+
TMDS data 2/4 shield
N.C.
N.C.
DDC clock
DDC data
N.C.
TMDS data 1-
TMDS data 1+
TMDS data 1/3 shield
N.C.
N.C.
+5 V
GND
No.
16
17
18
19
20
21
22
23
24
Function
Hot-plug detection
TMDS data 0-
TMDS data 0+
TMDS data 0/5 shield
N.C.
N.C.
TMDS clock shield
TMDS clock+
TMDS clock-
58
E
Unit: mm
Dimensional Drawings
Opening height 
(807)
Opening width (1432)
1572
126
7
1485
860
20
20
923
650
440
393
Screw holes for
 mounting brackets 
(M10 x 4 holes)
595
155
85
85
Monitor unit only
Note that the values shown are approximate values.
Page of 64
Display

Click on the first or last page to see other PN-655E (serv.man5) service manuals if exist.

RANDOM: