DOWNLOAD Sharp PN-655E (serv.man5) Service Manual ↓ Size: 1.25 MB | Pages: 64 in PDF or view online for FREE

ENGLISH

51

E

WR

W

WR

WR

WR

W

R

OFF

ON

ALL RESET
OSD DISPLAY ON

OSD DISPLAY OFF

ADJUSTMENT UNLOCKED

ADJUSTMENT LOCKED

LED ON

LED OFF

Initialisation

No detectable error has occurred

Standby mode by remote control

Standby mode by power switch on the monitor

Standby mode by RS-232C

Waiting mode by No Signal/Out of Timing (Incl: VESA DPMS/DMPM)

Standby mode by abnormal temperature

Standby mode by OFF TIMER function

0

1

0

0

1

0

1

0

1

0

0

1

0

1

0

1

0

1

0

1

2

3

4

6

7

MUTE

RSET

LOSD

ALCK

OFLD

STCA

MUTE

ALL RESET

OSD DISPLAY

ADJUSTMENT LOCK

LED 

CAUSE OF LAST STANDBY
MODE

No

No

Yes

Yes

Yes

Yes

(Continued from the previous page)

*

Control item

Reply

Control/Response contents

Command Direction Parameter

52

E

Before calling for repair services, make sure following checks for possible remedies to the encountered
symptoms.

There is no picture 
or sound.

Remote control does not work.

Sound from left and 
right speakers is 
reversed.
Sound is heard from 
only one side.

There is a picture 
but no sound.

Faint colour or bad hue.

•  Is the power cord disconnected?
•  Is the main power switch set to “OFF (O)”?  
•  Is the monitor in standby mode (the power LED 

illuminating in orange)?

•  Make sure correct input mode is selected.
•  If any external equipment is connected, make 

sure the equipment is operating (playing back).

•  Are the batteries inserted with polarity (     ,     ) 

aligned?

•  Are the batteries worn out?
•  Point the remote control unit toward the monitor’s 

remote control sensor.

•  Is the menu display hidden or are settings 

locked?

•  Are audio cables connected properly?
•  Make sure audio cables for external speakers are 

connected properly: left and right cables may be 
reversed or one of the two cables may not be 
connected.

•  Is the sound muted?
•  Make sure the volume is not set to minimum.
•  Is the PC audio cable (commercially available) 

connected?

•  The COMPONENT and VIDEO input terminals 

are for video only. When these terminals are 
used, make sure their audio cables are also 
connected.

•  Is the audio signal input properly to the audio 

input terminal corresponding to the selected 
video input terminal?

•  Check “COLORS” and “TINT” adjustments.
•  Make sure the connection sequence is correct.

•  The signal may be incompatible.
  1080p signals in component are not supported.
•  Is this your first attempt at using the PC analogue 
   RGB input terminal to display a PC screen? Or, 
   did you change the setting of the PC connected 
   to the PC analogue RGB input terminal?

17
21
21

8, 22

–

11

11
11

26

12 to 16

16

22
22

12, 13

14, 15

8,12 to 15

29

12 to 15

–

35

Unstable video

ENGLISH

53

E

■

 Warning when temperature rises
Nature of warning:

• The power LED (see page 21) lights up red and the monitor enters standby mode.

Solution:

• If the monitor enters standby mode due to a rise in temperature, you can reset the monitor to normal

operation by turning it on again using the POWER button on the remote control unit or the power

switch   on the front panel. The monitor, however, will enter standby mode again if the cause of the
temperature rise is not eliminated.

• Check whether the monitor is placed at a location where a quick rise in temperature is likely. Internal

temperature rises quickly if the vents on the monitor are blocked.

• Internal temperature rises quickly if dust accumulates inside the monitor or around the vents.

Remove dust if possible. Ask Sharp dealer about removing internal dust.

The monitor sometimes makes a cracking sound.
• You may hear cracking sound from the monitor. This happens

when the cabinet slightly expands and contracts according to
change in temperature. This does not affect the monitor’s
performance.

54

E

■

Model  

 

PN-655E

LCD element 

65" wide (163.9 cm diagonal) ASV low-reflection black TFT LCD

Max. resolution (pixels) 

 

1920 x 1080

Max. colours 

 

16.77 M colours (8 bits/colour)

Pixel pitch  

 

0.744 mm (H) x 0.744 mm (V)

Viewing angle 

 

170

°

 right/left/up/down (contrast ratio 

≥

10)

Screen active area  

mm 

1428 (H) x 804 (V)

Computer        Video 

 

Analogue RGB (0.7Vp-p) [75

Ω

], Digital (DVI 1.0 standard-compliant)

input                Sync 

Horizontal/Vertical separate (TTL: positive/negative), Sync-on-green, 

signal   

Composite sync (TTL: positive/negative)

                       Plug and play  

VESA DDC2B

                       Power management  VESA DPMS, DVI DMPM
Video colour system 

PAL, PAL-60, SECAM, NTSC (3.58 MHz), NTSC (4.43 MHz)

Input terminals 

Computer signal 

Analogue 

Mini D-sub 15 pin (3 rows) x 1

 

 

Digital 

DVI-D 24 pin x 1

 

Computer audio 

3.5 mm mini stereo jack x 1

 

RS-232C 

D-sub 9 pin x 1

 

Composite video 

BNC x 1 

 

Component 

BNC (Y, Cb/Pb, Cr/Pr) x 1

 

Audio 

RCA pin (L/R x 1)

Output terminals 

Computer signal 

Digital

           

DVI-D 24 pin x 1

 

RS-232C  

D-sub 9 pin x 1

 

Audio 

RCA pin (L/R x 1)

 

Speaker 

10 W + 10 W [6

Ω

]

Installation 

mm 

Secured at 4 points (pitch: 650(V), 440(H))(M10 screws)

Power requirement  

 

AC 100V - 240V, 50/60Hz

Power consumption  

 

550 W (2.0 W in input signal waiting mode, 2.0 W in standby mode)

Surrounding   Operating temperature range   0

°

C to 40

°

C

environment   Operating humidity range  

20% to 80% (no condensation)

Dimensions (monitor unit only)  

mm 

Approx. 1,572 x 126 x 923 (excluding protrusions)

Weight 

kg 

Approx. 65 (excluding the temporary stand)

As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification 
changes for product imporovement without prior notice. 
The performance specification figures indicated are nominal values of production units. There may be some 
deviations from these values in individual units.