DOWNLOAD Sharp PN-60TB3 (serv.man4) Service Manual ↓ Size: 52.15 MB | Pages: 127 in PDF or view online for FREE

PN-L703A/L703B, PN-70TA3/70TB3, PN-L603A/L603B, PN-60TA3/60TB3 

INSTALLATION, ADJUSTMENT, SETTING    2 - 3 

■

 

 

Video input/output 

HDMI 1 input terminal 
 
 

- Use a commercially available HDMI cable (conforming to the 

HDMI standard). 

- Set HDMI1/HDMI2/HDMI3 of INPUT SELECT on the SETUP 

menu according to the device to be connected. 

- Select the audio input terminal to be used in AUDIO SELECT of 

the SETUP menu. 

When HDMI is selected, connection to the audio input terminal is 

unnecessary. 

HDMI 2 input terminal 
 
 
HDMI 3 input terminal 
 
 
DisplayPort input terminal 

- Use a commercially available DisplayPort cable (conforming to 

the DisplayPort standard). 

- Select the audio input terminal to be used in AUDIO SELECT of 

the SETUP menu.                                                                           
When DisplayPort is selected, connection to the audio input 
terminal is unnecessary. 

D-sub 1 input terminal 

- Set D-SUB1 of INPUT SELECT on the SETUP menu according 

to the device to be connected. 

- To use with D-SUB1[VIDEO], connect the green terminal to the 

device’s video output. 

- Select the audio input terminal to be used in AUDIO SELECT of 

the SETUP menu. 

D-sub 2 input terminal 

 

 

- Select the audio input terminal to be used in AUDIO SELECT of 

the SETUP menu. 

Audio input/output 

Audio 1 input terminal 

 

 

- Use an audio cable without resistance. 
- Set the audio input terminal to be used in each input mode in 

AUDIO SELECT on the SETUP menu. 

Audio 2 input terminal 

 

 

DisplayPort output terminal 

 

- The screen displayed on the monitor and the audio output from 

the monitor can be output to an external device. 

- Use a commercially available DisplayPort cable (conforming to 

the DisplayPort standard). 

- Outputting HDCP-encrypted video requires an external device 

which supports HDCP. 

Audio output terminal 

 

- The output sound varies depending on the input mode. 
- The volume of the output sound can be fixed by setting AUDIO 

OUTPUT of AUDIO OPTION on the SETUP menu. 

- It is not possible to control the sound output from the audio output 

terminals with the AUDIO menu. 

External speaker terminals 

 

 

 

- To use external speakers, set SPEAKER SELECT to EXTERNAL 

in AUDIO OPTION on the SETUP menu. 

- Be sure to use external speakers with an impedance of 6 Ω or 

greater and a rated input of at least 10 W. 

PN-L703A/L703B, PN-70TA3/70TB3, PN-L603A/L603B, PN-60TA3/60TB3 

INSTALLATION, ADJUSTMENT, SETTING    2 - 4 

 

Other 

Touch pen adapter port 

- Connect the touch pen adapter in order to use the touch pen. 

USB 1 (type B) port 
 
 
 

- To use the touch panel with the computer connected to the 

bottom, connect the touch panel to the computer with the USB 
cable. (Factory setting. Can be changed in TOUCH INPUT 
SELECT on the SETUP menu.) 

USB 2 (type B) port 
 
 
 

- To use the touch panel with the computer connected to the side, 

connect to the computer with the USB cable. (Factory setting. 
Can be changed in TOUCH INPUT SELECT in the SETUP 
menu.) 

LAN terminal 

 

 

- You can control the monitor from a computer on a network by 

connecting a commercially available LAN cable between this 
terminal and a network. 

WHITEBOARD mode 
terminals 

USB ports 
 

- Connect USB devices that you will use with the WHITEBOARD 

(USB flash drive, USB keyboard, USB mouse). 

- Removing a USB flash drive. 

(1) Touch [Eject USB Media] (      ). 

 

 

 

(2) Touch the USB flash drive that you want to remove. 
(3) Touch [Stop]. 
(4) When “You can eject the USB device.” appears, remove the 

USB flash drive. 

(5) Touch [Close]. 

LAN terminal 

 

- A commercially available LAN cable can be used to connect the 

WHITEBOARD to the network while in use.   

 
 
 

 
■ 

1. LAN cable (commercially available, crossover) is directly connected to the PC 

Your monitor can be connected to a LAN allowing you to control it from a PC on the LAN. 

You can also configure the monitor to send e-mail notification when it has a problem. 

The connection requires a commercially available LAN cable (UTP cable, Category 5, straight through). 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PN-L703A/L703B, PN-70TA3/70TB3, PN-L603A/L603B, PN-60TA3/60TB3 

  INSTALLATION, ADJUSTMENT, SETTING  2 - 5 

2. LAN cable (commercially available, straight) is directly connected to the PC 

Your monitor can be connected to a LAN allowing you to control it from a PC on the LAN. 

You can also configure the monitor to send e-mail notification when it has a problem. 

The connection requires a commercially available LAN cable (UTP cable, Category 5, straight through). 

 

 

 

 

 

 

 

 

 

(MEMO) 

- You must assign an IP address to the monitor by following the procedures in 

“Settings to connect to a LAN”. (See the description on the 

right.) 

- Your PC must be installed with Internet Explorer (version 7.0 or later). 

Version 7, 8, or 9 of Internet Explorer is recommended. 

Use Internet Explorer Version 10 in compatibility mode. 

- When STANDBY MODE is set to LOW POWER, control is not possible in standby mode. 

 

(Caution) 

- Use only the power cord supplied with the monitor. 

1 ) Turn off the main power switch. 

2 ) Plug the power cord (supplied) into the AC input terminal. 

3 ) Plug the power cord (supplied) into the AC power outlet. 

 

 

 

 

 

 

 

 

 

The cables connected to the terminals on the rear of the monitor can be fastened with the cable clamp. 

 

 

 

 

 

 

 

 

 

 

 

PN-L703A/L703B, PN-70TA3/70TB3, PN-L603A/L603B, PN-60TA3/60TB3 

  INSTALLATION, ADJUSTMENT, SETTING  2 - 6 

The handles can be removed. 

(CAUTION) 

- The removable handles and handle screws are for use with this monitor. Do not use them for any other devices. 

- To attach handles, be sure to use the handles and handle screws which were removed from the monitor. 

- Be sure the handles are attached securely. 

 

 

 

 

 

 

 

It is possible to mount a commercially available web camera in the following positions: 

 

 

 

 

 

 

 

 

 

 

 

 

 

Secure the tray using 5 tray mounting screws (M3) (supplied).