Sharp PN-60TB3 (serv.man4) Service Manual ▷ View online
PN-L703A/L703B, PN-70TA3/70TB3, PN-L603A/L603B, PN-60TA3/60TB3
OUTLINE OF THE PRODUCTS 1 - 16
4 – 3.SWITCHING THE SCREEN SIZE
Even when the screen size is changed, the display may remain the same depending on the input signal.
WIDE
PC input
Displays image so it fills the entire screen.
AV input
An image with a 4:3 aspect ratio is stretched to fill the entire screen.
ZOOM 1
PC input
An image with a 4:3 aspect ratio is enlarged to fill the entire screen without changing
the aspect ratio. The edges of the image may be cut off.
AV input
ZOOM 2
PC input
Use this size if ZOOM 1 cuts off the subtitles.
AV input
NORMAL
PC input
Displays image so it fills the screen without changing the aspect ratio of the input
signals.
AV input
Displays the entire image of the aspect ratio of 4:3 without changing the aspect ratio.
Dot by Dot
PC input
Displays the dots of the signals input from the connected PC as the corresponding
dots on the screen.
AV input
Displays the dots of the input signals as the corresponding dots on the screen.
(MEMO)
• Using this monitor’s screen-size switching or dual-screen display functions to compress or expand the screen for commercial
or public viewing in establishments like cafes or hotels may infringe on the rights of the creators, as protected by Copyright
Law, so please be careful.
• When dual-screen display is selected, the screen size cannot be changed.
• The appearance of the original video may change if you select a screen size with a different aspect ratio than the original
image (e.g. TV broadcast or video input from external equipment).
• When an ordinary non-wide image (4:3) is viewed with the whole screen using the screen-size switching function of this
monitor, the edge of the image may be lost or appear distorted. If you wish to respect the creator’s intentions, set the screen
size to “NORMAL”.
• When playing commercial software, parts of the image (like subtitles) may be cropped. In this case select the optimal screen
size using the screen-size switching function of this monitor. With some software, there may be noise or distortion at the
edges of the screen. This is due to the characteristics of the software, and is not a malfunction.
• Depending on the original image size, black bands may remain at the edges of the screen.
PN-L703A/L703B, PN-70TA3/70TB3, PN-L603A/L603B, PN-60TA3/60TB3
OUTLINE OF THE PRODUCTS 1 - 17
4- 3. USING THE TOUCH MENU
You can touch the monitor to change input mode, volume, and
other settings.
1) Press the TOUCH MENU button.
2) Touch the screen to change settings.
(1) INPUT (Input mode selection)
Changes the input mode.
Input mode
Video
Audio
DisplayPort
DisplayPort input
terminal
*5
HDMI1
HDMI1 input terminal
*1
HDMI2
HDMI2 input terminal
*2
HDMI3
HDMI3 input terminal
*3
D-SUB1
D-SUB1 input terminal
*4
D-SUB2
D-SUB2 input terminal
WHITEBOARD WHITEBOARD
• When the input mode is changed, the touch panel
connection also changes. You can set whether the side or
bottom USB port is used in each input mode.
*1 Select the terminal to be used in HDMI1 of INPUT
SELECT.
*2 Select the terminal to be used in HDMI2 of INPUT
SELECT.
*3 Select the terminal to be used in HDMI3 of INPUT
SELECT.
*4 Select the terminal to be used in D-SUB1 of INPUT
SELECT.
*5 Select the terminal for AUDIO SELECT which is used for audio
input.
(2) Volume adjustment
Changes the volume.
(3) Touch action setting
Touch to disable touch action.
Touch again to enable touch action.
(MEMO)
• When the input mode is changed, the disable touch
action setting is canceled.
• When TOUCH OUTPUT INVALID ICON is set to ON and
touch action is disabled, the TOUCH OUTPUT INVALID
icon appears in the monitor.
• You can touch the TOUCH OUTPUT INVALID icon in the
monitor to enable touch action.
• The position of the TOUCH OUTPUT INVALID icon can
be changed. (See page 38.)
• The TOUCH OUTPUT INVALID icon appears even when
the USB cable is not connected.
(4) Exit touch menu
Closes the touch menu.
• The touch menu can also be used with the remote control
unit.
(1) Hold down at least 5 seconds.
The touch menu appears.
(2) Select the setting item with .
(3) Set with , and press .
- The setting is entered.
- Press to exit the touch menu.
PN-L703A/L703B, PN-70TA3/70TB3, PN-L603A/L603B, PN-60TA3/60TB3
INSTALLATION, ADJUSTMENT, SETTING 2 - 1
Chapter 2 INSTALLATION, ADJUSTMENT, SETTING
1. INSTALLATION
1 – 1.INSTALLAING PRECAUTIONS
• This product is for use indoors.
• A mounting bracket compliant with VESA specifications is
• A mounting bracket compliant with VESA specifications is
required.
• Since the monitor is heavy, consult your dealer before
installing, removing or moving the monitor.
• Mounting the monitor on the wall requires special expertise
and the work must be performed by an authorized SHARP
dealer. You should never attempt to perform any of this
work yourself. Our company will bear no responsibility
for accidents or injuries caused by improper mounting or
mishandling.
• Use the monitor with the surface perpendicular to a level
surface. If necessary, the monitor may be tilted up to 20
degrees upward.
• When moving the monitor, be sure to hold it with the
handles and the unit bottom. Do not grasp the screen or
tray. This may cause product damage, failure, or injury.
• This monitor should be used at an ambient temperature
between 41°F (5°C) and 95°F (35°C). Provide enough
space around the monitor to prevent heat from
accumulating inside.
•
If it is difficult to provide sufficient space for any reason
such as the installation of the monitor inside a housing, or
if the ambient temperature may be outside of the range
of 41°F (5°C) to 95°F (35°C), install a fan or take other
measures to keep the ambient temperature within the
required range.
•
Temperature condition may change when using the monitor
together with the optional equipments recommended by
SHARP. In such cases, please check the temperature
condition specified by the optional equipments.
•
Do not block any ventilation openings. If the temperature inside
the monitor rises, this could lead to a malfunction.
•
Do not place the monitor on a device which generates heat.
•
Do not use the product in locations where the unit is exposed
to direct sunlight or other strong light. Since this
product operates with infrared rays, such light may cause a
malfunction.
1 – 2.MOUNTING PRECAUTIONS
•
When installing, removing or moving the monitor, ensure that
this is carried out by at least 4 people.
•
Be sure to use a wall-mount bracket designed or designated for
mounting the monitor.
•
This monitor is designed to be installed on a concrete wall or
pillar. Reinforced work might be necessary for some materials
such as plaster / thin plastic board / wood before starting
installation.
This monitor and bracket must be installed on a wall which can
endure at least 4 times or more the weight of the monitor.
Install by the most suitable method for the material and the
structure.
•
To attach a VESA-compliant mounting bracket, use M6 screws
that are 5/16 inch (8 mm) to 3/8 inch (10 mm) longer than the
thickness of the mounting bracket.
•
Do not use an impact driver.
•
After mounting, please carefully ensure the monitor is secure,
and not able to come loose from the wall or mount.
•
Do not use any screw holes other than VESA holes for
installation.
PN-L703A/L703B, PN-70TA3/70TB3, PN-L603A/L603B, PN-60TA3/60TB3
INSTALLATION, ADJUSTMENT, SETTING 2 - 2
1 – 3.CONNECTING PERIPHERAL EQUIPMENT
(Caution)
•
Be sure to turn off the main power switch and disconnect the plug from the power outlet before connecting/disconnecting cables. Also,
read the manual of the equipment to be connected.
•
Be careful not to confuse the input terminal with the output terminal when connecting cables. Accidentally reversing cables connected to
the input and output terminals may cause malfunctions and the other problems.
•
Do not use any cable that has a damaged or deformed terminal. Using such cables may cause malfunctions.
(MEMO)
-
When using a touch panel with a computer connected to the monitor, connect the USB cable to the computer. For details, see the Touch
Panel Settings Tool Operation Manual.
-
Images may not be displayed properly depending on the computer (video card) to be connected.
-
Use the automatic screen adjustment when a computer screen is displayed for the first time using D-SUB1 or D-SUB2, or when the
setting of the computer is changed.
The screen is adjusted automatically when SELF ADJUST in the MONITOR menu is set to ON.
-
If the audio output from the playback device is connected directly to speakers or other devices, the video on the monitor may appear
delayed from the audio portion.
Audio should be played through this monitor by connecting the playback device to the monitor’s audio input, and connecting the
monitor’s audio output to the speakers or other devices.
-
The audio input terminals used in each input mode are factory-set as follows.
Input mode
Audio input terminal
(Factory setting)
D-SUB1
Audio 1 input terminal
D-SUB2
Audio 2 input terminal
DisplayPort
DisplayPort input terminal
HDMI1
HDMI 1 input terminal
HDMI2
HDMI 2 input terminal
HDMI3
HDMI 3 input terminal
WHITEBOARD
WHITEBOARD
1. HDMI 1 input terminal
2. HDMI 2 input terminal
3. HDMI 3 input terminal
4. DisplayPort input terminal
5. D-sub 1 input terminal
6. D-sub 2 input terminal
7. Audio 1 input terminal
8. Audio 2 input terminal
9. DisplayPort output terminal
10. Audio output terminal
11. Touch pen adapter port
12. USB 1 (type B) port
13. USB 2 (type B) port
14. LAN terminal
15. External speaker terminals
16. USB port
17. LAN terminal
18. USB port for Service
2. HDMI 2 input terminal
3. HDMI 3 input terminal
4. DisplayPort input terminal
5. D-sub 1 input terminal
6. D-sub 2 input terminal
7. Audio 1 input terminal
8. Audio 2 input terminal
9. DisplayPort output terminal
10. Audio output terminal
11. Touch pen adapter port
12. USB 1 (type B) port
13. USB 2 (type B) port
14. LAN terminal
15. External speaker terminals
16. USB port
17. LAN terminal
18. USB port for Service
17
13
6
2
3
8
16
7
10
5
1
4
9
11
14
12
15
18
Click on the first or last page to see other PN-60TB3 (serv.man4) service manuals if exist.