DOWNLOAD Sharp LL-T2010W (serv.man23) Service Manual ↓ Size: 738.05 KB | Pages: 30 in PDF or view online for FREE

Notes:
- Depending on the resolution of the input signal,

even if menu options can be selected, the display
may not change.

- To choose a menu option: SELECT button
- When adjustment complete: MENU button

OSD H-POSITION (OSD horizontal position)
The position of the OSD display can be moved to

the left and right. (    buttons)

OSD V-POSITION (OSD vertical position)
The position of the OSD display can be moved up

and down. (    buttons)

EXPAND (Screen expansion)
For display modes of less than 1600 X 1200 pixels,

the display can be expanded if desired. (  
buttons)

OFF: Expansion off
ON1: Using the fixed aspect ratio, the entire

screen is enlarged.

ON2: The entire screen is enlarged.

Note:
- If a resolution of 1600 X 1200 pixels cannot be

achieved even after expansion is attempted, the
screen's perimeter will display black. (This is not
a malfunction.)

SCALING (Level of scaling)
If [EXPAND] is set on [ON1] or [ON2], the sharp-

ness of the image can be adjusted.  (    buttons)

Note:
- If [EXPAND] is set on [OFF], [SCALING] cannot

be adjusted.

LANGUAGE
Messages displayed on the screen and OSD Menu
contents can be changed to the following lan-
guages.

English, German, French, Dutch, Spanish,
Italian, Swedish

1. After selecting [LANGUAGE], press the   button.

The Language Selection Menu will be displayed
on the screen.

2. Select the desired language using the SELECT

button.

3. Press the MENU button.

The Language Selection Menu disappears.

Always remove the plug from the AC outlet when
cleaning the monitor.

Use a soft dry cloth to lightly wipe away any grime
from the cabinet and control panel.
If they are very dirty, apply neutral detergent to a
dampened soft cloth, wring it out well and wipe
away grime.

Use a soft dry cloth to lightly wipe away dirt and
dust from the surface of the LCD panel. (A soft
cloth such as gauze or that used for lens cleaning
is suitable.)

- Never use thinner, benzine, alcohol, glass

cleaner, etc, as this could lead to color change or
change in shape.

- Never scratch the monitor with anything hard or

apply strong pressure as this could leave marks
or result in malfunction.

If the monitor will not be used for a long period of
time, be sure to remove the power plug from the
AC outlet.

- Do not leave the monitor in contact with rubber or

plastic items for long periods of time as this could
lead to color change or change in shape.

If you think the monitor may be faulty, please check
the following points before taking it to be repaired.
If afterwards it still does not work, please contact
the shop where you purchased the monitor or your
nearest Sharp authorized Service Center.

The monitor's florescent tubes have a limited
life span.
- If the screen darkens, persistently flickers or

does not light up, it may be necessary to
replace the florescent tube unit. Please inquire
at the shop where you purchased the monitor
or your nearest Sharp authorized Service
Center. (Never attempt this replacement on
your own.)

- In the initial period of use, due to the

characteristics of florescent tubes the screen
may flicker. (This is not a malfunction.) Should
this happen, check by first turning off the
power, then turning it on again.

No image appears on the monitor (Power LED is
not lit)
- Are the AC adapter and power cord connected

properly? (p. 12)

No image appears on the monitor (Power LED is
lit)
- Is the computer connected properly? (p. 13)
- Is the computer turned on?
- Is the signal’s input terminal switched to the

correct one? (p. 14)

- Does the computer's signal timing correspond to

monitor specifications? (p. 25)

- Is the computer in power-saving mode?

Control buttons do not work
- Is the adjustment lock on? (p. 16)

Only VGA image is displayed
- Does the Windows display timing setting meet

monitor specifications? Refer to the monitor
signal timings (p. 25) and set to appropriate
timing.

The image appears distorted
- Does the computer's signal timing correspond to

monitor specifications? (p. 25)

- If you are using the analog signal, perform

automatic adjustment. (p. 17)

- If you can change the frequency on the computer

you are using, change the values to a low
frequency count.

LCD display

Diagonal 51cm, Advanced Super-V and Anti-
Glare Low Reflection TFT LCD module

Resolution (max.)

UXGA 1600 x 1200 pixels

Displayable colors (max.)

16.77 million colors (8 bit)

Brightness (max.)

220cd/m

2

Dot pitch

0.255(H) x 0.255(V) mm

Contrast ratio

350:1

Angle of visibility

Left-right 170°; Up-down 170°

Screen display size

Horizontal 408 mm x Vertical 306 mm

Video signal

Analog: Analog RGB (0.7Vp-p) [75

Ω]

Digital: DVI standard based on 1.0

Sync signal

Separate Sync (TTL level: +/-), Sync on
Green, Composite Sync (TTL level: +/-)

Expansion compensation

Digital screening
Enlarging VGA/SVGA/XGA/SXGA etc. with a
compensation process. (no enlarging, based on a
fixed aspect ratio, and enlarging to full screen size.)

Plug & Play

VESA: DDC2B compatible

Power management

VESA: based on DPMS
DVI:

based on DMPM

Input signal terminal

Analog:

15 pin mini D-sub (3 rows)

Digital / Analog: 29 pin DVI-I

USB hub function

1 upstream port, 2 downstream ports (bus-
powered hub based on USB standard Rev 1.1)

Screen tilt

Upward 0° -30°; downward 0° - 5°

Screen swivel

90° from left through right

Power supply

AC100-240V, 50/60Hz (Use special AC adapter,
type NL-A51J of Sharp Corporation.)

Temperature of operating environment

5 - 35°C

Power consumption

Maximum 52W (5.5W when in power-saving
mode) (Use special AC adapter.)

Dimensions (W x D x H)

483 mm x 218 mm x 479 mm

Weight (excluding AC adapter)

Approx. 10.5kg
Display area only, approx. 7.9kg

Dimensions (Units: mm)

483

227

78

479

397

218

Length of analog signal cable:

approx. 1.8 m*

Length of USB cable included:

approx. 2.0 m

* Length from analog signal input terminal

Special AC adapter

Digital signal cable (NL-C01E):

Approx. 2.0 m

Analog signal cable (NL-C02E):

Approx. 2.0 m

Approx. 1.8 m

Approx. H 140 mm x D 70 mm x H 41 mm

640 x 480

640 x 400
720 x 400
800 x 600

1024 x 768

1152 x 864
1280 x 960
1280 x 1024

1600 x 1200

720 x 400
640 x 480
832 x 624

1024 x 768
1152 x 870
1280 x 1024

1600 x 1200
1024 x 768

1152 x 900

1280 x 1024

1600 x 1000

60Hz
72Hz
75Hz
85Hz
85Hz
85Hz
56Hz
60Hz
72Hz
75Hz
85Hz
60Hz
70Hz
75Hz
85Hz
75Hz
60Hz
60Hz
75Hz
60Hz
70Hz

66.7Hz
74.6Hz

75Hz
75Hz
60Hz
75Hz
60Hz
60Hz
66Hz
70Hz
66Hz

76.2Hz
67.2Hz

76Hz
66Hz

25.175MHz

31.5MHz
31.5MHz
36.0MHz
31.5MHz
35.5MHz
36.0MHz
40.0MHz
50.0MHz
49.5MHz

56.25MHz

65.0MHz
75.0MHz

78.75MHz

94.5MHz

108.0MHz
108.0MHz
108.0MHz
135.0MHz
162.0MHz

28.3MHz
30.2MHz
57.3MHz
80.0MHz

100.0MHz
108.0MHz
135.0MHz
162.0MHz
64.13MHz

70.4MHz

74.25MHz
94.88MHz

108.23MHz
117.01MHz
134.99MHz
135.76MHz

31.5kHz
37.9kHz
37.5kHz
43.3kHz
37.9kHz
37.9kHz
35.1kHz
37.9kHz
48.1kHz
46.9kHz
53.7kHz
48.4kHz
56.5kHz
60.0kHz
68.7kHz
67.5kHz
60.0kHz
64.0kHz
80.0kHz
75.0kHz
31.5kHz
35.0kHz
49.7kHz
60.2kHz
68.7kHz
64.0kHz
80.0kHz
75.0kHz
48.3kHz
53.6kHz
56.6kHz
61.8kHz
71.8kHz
71.7kHz
81.1kHz
68.6kHz

- All are compliant only with non-interlaced.
- Frequencies for Power Macintosh and the Sun

Ultra series are reference values. To connect,
another adapter (commercially available) may be
required.

- If the monitor is receiving timing signals that are

not compatible, [OUT OF TIMING] will appear.
Follow your computer’s instruction manual to set
the timing so that it is compatible with the
monitor.

- If the monitor is not receiving any signal (synch

signal), [NO SIGNAL] will appear.

640 x 480

800 x 600

1024 x 768

1152 x 864
1280 x 960
1280 x 1024
1600 x 1200

720 x 400

31.5kHz
37.9kHz
37.5kHz
37.9kHz
48.1kHz
46.9kHz
48.4kHz
56.5kHz
60.0kHz
67.5kHz
60.0kHz
64.0kHz
75.0kHz
31.5kHz

60Hz
72Hz
75Hz
60Hz
72Hz
75Hz
60Hz
70Hz
75Hz
75Hz
60Hz
60Hz
60Hz
70Hz

25.175MHz

31.5MHz
31.5MHz
40.0MHz
50.0MHz
49.5MHz
65.0MHz
75.0MHz

78.75MHz
108.0MHz
108.0MHz
108.0MHz
162.0MHz

28.3MHz

- All are compliant only with non-interlaced.
- A computer with an output terminal conforming to

DVI (DVI-D24 pin or DVI-I29 pin) and with UXGA
output capability can be connected here.
Depending on the type of computer to be
connected, the display may not work correctly. In
order to connect, it is necessary to purchase a
digital signal cable (model name: NL-C01E)
separately.

- If the monitor is receiving timing signals that are

not compatible, [OUT OF TIMING] will appear.
Follow your computer's instruction manual to set
the timing so that it is compatible with the
monitor.

- If the monitor is not receiving any signal (synch

signal), [NO SIGNAL] will appear.