DOWNLOAD Sharp LL-T15G1 (serv.man10) Service Manual ↓ Size: 552.94 KB | Pages: 25 in PDF or view online for FREE

Installing monitor set-up information into Win-
dows98, and setting the monitor's ICC profile as a
predetermined value.
This explanation assumes that the floppy disk drive
is "A drive".

If the "Add new Hardware Wizard" has appeared:

1. Place the Utility Disk (provided) into the compu-

ter's A drive.

2. Click [Next].

3. Check [Display a list of all the drivers in a specific

location, so you can select the driver you want.],
then click [Next].

4. When [Models] is displayed, click on [Have disk],

confirm that [Copy manufacturer's files from:] is
[A:], and click [OK].

5. Confirm that the monitor details are selected,

then click [Next], [Next], and [Finish]. If the "Add
New Hardware Wizard" appears, repeat the
installation commands beginning from 2 above.

6. Remove the Utility Disk from the A drive.

If the "Add New Hardware Wizard" has not ap-
peared:

1. Place the Utility Disk in the computer's A drive.

2. Click on the [Start] button. From [Settings],

choose [Control Panel].

3. Double click on [Display].

4. Click on [Settings], [Advanced] and [Monitor].

5. In [Options], check [Automatically detect Plug &

Play monitors] and click on [Change].

6. Click [Next].

7. Click on [Display a list of all the drivers in a

specific location, so you can select the driver you
want.], then click [Next].

8. When [Models] is displayed, click on [Have disk],

confirm that [Copy manufacturer's files from:] is
[A:], and click [OK].

9. Confirm that the monitor details are selected,

then click [Next], [Next], and [Finish].

10. Check that the monitor details are displayed, then

click [Apply].

11. Click [OK], and close the window.

12. Remove the Utility Disk from the A drive.

Installing monitor set-up information into Win-
dows2000, and setting the monitor's ICC profile as a
predetermined value.
This explanation assumes that the floppy disk drive
is "A drive".

1. Place the Utility Disk (provided) into the compu-

ter's A drive.

2. Click on the [Start] button. From [Settings],

choose [Control Panel].

3. Double click on [Display].

4. Click on [Settings], [Advanced] and [Monitor].

5. Click on [Properties], [Driver] and [Update

Driver].

6. When [Upgrade Device Driver Wizard] appears,

click [Next].

7. Check [Display a list of the known drivers for this

device so that I can choose a specific driver] and
click [Next].

8. When [Models] is displayed, click on [Have disk],

confirm that [Copy manufacturer's files from:] is
[A:], and click [OK].

9. Select the monitor from the list displayed and

click [Next].

10. Click [Next], confirm that the monitor's name

appears on the screen, and click [Finish]. If [The
Digital Signature Not Found] appears, click [Yes].

11. Click on [Close].

12. Click [OK], and close the window.

13. Remove the Utility Disk from the A drive.

Installing monitor set-up information into
WindowsMe, and setting the monitor's ICC profile as
a predetermined value.
This explanation assumes that the floppy disk drive
is "A drive".

If the "Add new Hardware Wizard" has appeared:

1. Place the Utility Disk (provided) into the compu-

ter's A drive.

2. Check [Specify the location of the driver [Ad-

vanced]] and click [Next].

3. Check [Display a list of all the drivers in a specific

location, so you can select the driver you want.],
then click [Next].

4. When [Models] is displayed, click on [Have disk],

confirm that [Copy manufacturer's files from:] is
[A:], and click [OK].

5. Select the monitor details from the list, then click

[Next], [Next], and [Finish]. If the "Add new
Hardware Wizard" appears, repeat the installa-
tion commands beginning from 2 above.

6. Remove the Utility Disk from the A drive.

If the "Add New Hardware Wizard" has not ap-
peared:

1. Place the Utility Disk in the computer's A drive.
2. Click on the [Start] button. From [Settings],

choose [Control Panel].

3. Double click on [Display].
4. Click on [Settings], [Advanced] and [Monitor].
5. In [Options], check [Automatically detect Plug &

Play monitors] and click on [Change].

6. Check [Specify the location of the driver

[Advanced]] and click [Next].

7. Check [Display a list of all the drivers in a specific

location, so you can select the driver you want.]
and click [Next].

8. When [Models] is displayed, click on [Have disk],

confirm that [Copy manufacturer's files from:] is
[A:], and click [OK].

9. Select the monitor details, then click [Next],

[Next], and [Finish].

10. Check that the monitor details are displayed, then

click [Apply].

11. Click [OK], and close the window.
12. Remove the Utility Disk from the A drive.

Installing monitor set-up information into
WindowsXP, and setting the monitor's ICC profile as
a predetermined value.
This explanation assumes that the floppy disk drive
is "A drive".

1. Place the Utility Disk in the computer's A drive.
2. Click on the [Start] button. Choose [Control

Panel].

3. Switch to "Classic View".
4. Double click on [Display].
5. Click on [Settings], [Advanced] and [Monitor].
6. Click on [Properties], [Driver] and [Update

Driver].

7. When [Hardware Update Wizard] appears, check

[Install from a list or specific location [Advanced]]
and click [Next].

8. Check [Don't search. I will choose the driver to

install.] and click [Next].

9. Click on [Have Disk], confirm that [Copy

manufacturer's  files from:]  is [A:], and click [OK].

10. Select the monitor from the list displayed and

click [Next].
If [has not passed Windows Logo testing...]
appears, click [Continue Anyway].

11. Confirm that the monitor's name appears on the

screen.

12. Click on [Finish].
13. Click on [Close].

14. Click [OK], and close the window.

15. Remove the Utility Disk from the A drive.

Installing the ICC profile
Installing the monitor’s ICC profile. (If the set-up
information has already been installed, so too has
the profile, and there is no need to install it.)
This explanation assumes that the floppy disk drive
is "A drive".

1. Place the Utility Disk in the computer’s A drive.
2. Click on the [Start] button. From [Settings],

choose [Control Panel].

3. Double click on [Display].
4. Click on [Settings] and [Advanced].
5. Click on [General] and from [Compatibility] select

[Apply the new display setting without restarting],
then click on [Color Management].

6. Click [Add], and select [3 ½ Floppy [A:]] as the

file location.

7. Choose the color profile that you would like to

install, and click on [Add].

8. Choose the profile and click on [Set As Default].
9. Click [OK], and close the window.
10.Remove the Utility Disk from the A drive.

When using the ICC profile, please set the
[WHITE BALANCE] to [STD].

About the ColorSync profile
ColorSync is the Apple Corporation's color man-
agement system and is a function that enables
color resolution to be realized when used with a
compatible application. A ColorSync profile
describes the color characteristics of the LCD
monitor.
Notes:
-

This monitor's ColorSync profile works with
MacOS8.5 or above.

When using the ColorSync profile, please set
the [WHITE BALANCE] to [STD] .

A floppy disk drive is necessary. In addition, it is
necessary to have PC Exchange or File
Exchange installed in your system.

Depending on the type of computer or OS,
command names and methods may differ. Please
follow the computer’s own operation manual while
reading this.

1. Place the Utility Disk (provided) into the

computer’s floppy disk drive.

2. Copy the profile to be used from the Mac folder

on the Utility Disk to the ColorSync profile folder
located within the system folder.

3. Using the ColorSync on the control panel,

choose the profile to be used.

Adjustment the backlight (right column)
Brightness of backlight can be adjusted.

Automatic screen adjustment (p.18)
The CLOCK, PHASE, H-POS (horizontal position-
ing) and V-POS (vertical positioning) functions can
be adjusted automatically.

Manual screen adjustment (p. 19)
Fine adjustments can be made using the On Screen
Display (OSD) Menu.

All adjustments will be saved even after turning
the power off.

Resetting all adjustment values
All adjustment values can be returned to their
original ex-factory values in one command.
1. Turn off the monitor power.
2. Press the MENU button and the SELECT button

simultaneously, and while doing this press the
power button (i.e. turn the power on). When [ALL
RESET] appears on the screen, the reset is
complete.

3. Turn off the monitor power.

While ALL RESET is displayed, the control
buttons are disabled.

It is not possible to reset values when the
adjustment lock is in place. Remove the
adjustment lock before attempting to operate
control buttons.

ADJUSTMENT menu reset
The adjustment values of the analogue signal time’s
ADJUSTMENT menu can be returned to their
original ex-factory values.

1. Turn on the monitor power.
2. Press the MENU button and the   button

simultaneously. When [RESET] appears on the
screen, the reset is complete.

Adjustment lock function
By disabling the control buttons (i.e. setting the lock)
any attempted changes to adjusted values will be
voided.
1. Turn off the monitor power.
2. While pressing the MENU button, press the

power button (i.e. turn the power on).
Continue to press the button until the message
appears on the screen.
When the menu is unlocked:
     [ADJUSTMENT LOCKED] will appear on
     the screen, and the lock will be set.
When the menu is locked:
     [ADJUSTMENT UNLOCKED] will appear
     on the screen, and the lock will be
     removed.

When the lock is in place, all buttons other than
the power button are disabled.

1. Without the OSD Menu being displayed, press

the   button or the   button.

2. Adjust by pressing the   button (darker) or the 

button (lighter).
The BRIGHT bar automatically disappears
several seconds after the last command.

B R I G H T         3 1