DOWNLOAD Sharp LL-T15G1 (serv.man10) Service Manual ↓ Size: 552.94 KB | Pages: 25 in PDF or view online for FREE

1. MENU button

This button is used to pop-up, select and close the OSD (On Screen
Display) Menu.

2. SELECT button

This button is used to select menu options when the OSD Menu is
displayed.

3.

   buttons

When the OSD Menu is displayed:
These buttons are used to increase or decrease the value of a selected
option.
When the OSD Menu is not displayed:
These buttons are used to adjust backlight brightness .

4. Power LED

This LED is lit green when in use and orange when in power-saving
mode.

5. Power button

Pressing this button turns the power on. (After turning the power on, it
may take a little time before the screen displays.)
Press the button again to turn the power off.

6. Power terminal

The AC adapter is connected here.

7. RGB input terminal

The RGB signal cable is connected here.

8. Security lock anchor

By connecting a security lock (purchased separately) to the security lock
anchor, the monitor is fixed so that it cannot be transported.
The security slot works in conjunction with Kensington Micro Saver
Security Systems.

9. Ventilation openings

Note: Never block the ventilation openings as this may lead to overheat-
ing inside the monitor and result in malfunction.

MENU     SELECT

1

2

3

4

5

6 7

8

9

Control Panel

Pressure from hands on the LCD panel could
cause damage.

Standing up the monitor
Press down on the stand and lift up the top section
of the monitor.

Be careful not to pinch your fingers.

When raising the display section, movement
becomes harder in the middle of travel. Continue
raising by applying more force at that point.

When the monitor is used with an arm mounting,
movement becomes stiffer to keep the display
section from tipping over. This is not a
malfunction.

Adjusting the monitor
Press down on the stand and adjust it to a suitable
viewing angle.

Folding up the monitor
1. Remove the AC adapter and the RGB signal

cable.

2. Press down on the stand and gently fold back the

monitor.

Be careful not to pinch your fingers.

Do not use the monitor when tilted back beyond
approximately 25º.The monitor may fall over
leading to injury or malfunction.

approx.25°

approx.5°

Prohibited range

approx.25°

approx.5°

When connecting, ensure that both the monitor and
computer are switched off.

Do not overly bend the cable or add extension
cords as this could lead to malfunction.

Firmly insert the analog RGB terminal
(mini D-sub 15 pin with 3 rows) then
tighten the screws each side.

RGB signal cable

If connecting to a D-sub 15 pin 2 row Apple
Power Macintosh, attach a Macintosh conver-
sion adapter (to be purchased separately) to
the RGB signal cable.

Macintosh conversion adapter

After connecting the adapter, tighten the
screws on each side to fix into place.

Before connecting, first turn off the monitor's main
power switch.

Do not overly bend the cable or add extension
cords as this could lead to malfunction.

1. Connect the AC adapter to the monitor's power

terminal.

2. Attach the power cord to the AC adapter and

place the power plug into the AC terminal.

Power terminal

AC adapter

1. Press the monitor's power button.
2. Turn on the computer.

The power LED will be lit green, and the screen
will display an image.

Power cord

AC terminal

ON

Turn on device to
which monitor is
connected

Press power button

1. Turn the computer off.

2. Press the monitor's power button.

The Power LED will disappear.
If the monitor is not going to be used for a long
period of time, be sure to unplug it from the AC
outlet.

Depending on the computer or OS, it may be neces-
sary to use the computer to operate the installation
of monitor set-up information etc. If so, follow the
steps below to install the monitor set-up information.
(Depending on the type of computer or OS, com-
mand names and methods may differ. Please follow
the computer’s own operation manual while reading
this.)

About the ICC profile
An ICC (International Color Consortium) profile is
a file that describes the color characteristics of
the LCD monitor. By using an application that
works together with an ICC profile, a high color
resolution can be realized.
-

Windows98/2000/Me/XP all use the ICC
profile.

When installing Windows98/2000/Me/XP set-
up information (described below), the ICC
profile is also installed. If you would like to
install  the ICC program only, please refer to
Installing the ICC profile on page 15.

When using the ICC profile, please set the
[WHITE BALANCE] to [STD] .

Installing monitor set-up information into Windows95.
This explanation assumes that the floppy disk drive
is "A drive".

1. Place the Utility Disk (provided) into the compu-

ter's A drive.

2. Click on the [Start] button. From [Settings],

choose [Control Panel].

3. Double click on [Display].

4. Click on [Settings], [Advanced Properties], and

[Monitor], then [Change].

5. Click on [Have disk], confirm that [Copy manufac-

turer's files from:] is [A:] then click [OK].

6. Confirm that the monitor details are selected, and

click [OK].

7. Check that the monitor details are displayed, then

click [Apply].

8. Click [OK], and close the window.

9. Remove the Utility Disk from the A drive.

If using the monitor for the first time or after
having changed the system settings during use,
perform an automatic screen adjustment.

Depending on the computer or OS, it may be
necessary to use the computer to install monitor
set-up information. If so, follow the steps below to
install the monitor set-up information.

OFF

Turn off device
to which monitor
is connected

Press power button