DOWNLOAD Sharp LL-T1512 (serv.man8) Service Manual ↓ Size: 791.29 KB | Pages: 32 in PDF or view online for FREE

CLOCK,PHASE,H-POS,V-POS in ADJUSTMENT
can be adjusted automatically.

When setting up this monitor for the first time or
after having any change on an aspect of the
current system, perform this Automatic Screen
Adjustment,before use.

First, display an image that makes the entire screen
light.
If you are using Windows, you can use Adjustment
Pattern on the accompanying Utility Disk.

Opening the Adjustment Pattern (for Windows)
If you are using Windows, you can use the Adjust-
ment Pattern (for Windows) on the accompanying
Utility Disk.
This explanation is for Windows 95/98/Me/2000, and
assumes that the floppy disk drive is "A drive".
-

If you are using the Floppy disk other than [Drive
A],read [Drive A] or [A:] in replacing them with the
drive name in use currently.

1. Place the Utility Disk (provided) into the

computer’s A drive.

2. Open [My Computer] and select [3 ½ Floppy [A:]].

If using Windows 3.1, open [File Manager] and
choose "A drive".

3. Double click on [Adj_uty.exe] to run the

Adjustment Program. The Adjustment Pattern will
appear.

After completing the adjustments, press the
computer’s [Esc] key to exit the Adjustment
Program.

If your computer’s display mode is set to 65K
colors, you may see the different color levels in
each color pattern or the gray scale may look
colored. (This is due to the specification of the
input signal and is not a malfunction.)

How to Adjust
1. Press the MENU button.

The ADJUSTMENT Menu will be displayed.

2. Press the   button.

The screen will become dark and [ADJUSTING]
will be displayed. After a few seconds the screen
returns to ADJUSTMENT Menu. (The automatic
adjustment is now complete.)

3. Press the MENU button 4 times to make the

OSD Menu disappear.

In most cases automatic adjustment is sufficient.

If necessary due to any of the following, manual
adjustments (p. 22) can be performed after the
automatic adjustment.

When further fine adjustment is needed.

When the computer’s video input signals are
Composite Sync or Sync On Green.
(Automatic adjustments may not be possible.)

When [OUT OF ADJUST] is displayed.
(When the screen displays an entirely dark
image, the automatic screen adjustment may
be disabled. When making an automatic
adjustment, be sure to either use the
Adjustment Pattern or try displaying an image
that makes the entire screen very bright.)

Adjustment pattern

Adjustment can be made using On Screen Display
(OSD) Menu provided.

On Screen Display for adjustment
If you are using Windows, open the Adjustment
Pattern on the accompanying Utility Disk. (p. 21).
If your system is not Windows, you can not use the
Adjustment Pattern. Therefore display an image that
makes the entire screen light and adjust it through
checking visually its actual tone.
This chapter provides the procedure how to adjust
the screen by using Adjustment Pattern (for Win-
dows)

How to adjust
1. Press the MENU button.

The ADJUSTMENT Menu will be displayed.

At this point relevant menu options can be adjusted.
Each time the MENU button is pressed the next
menu is selected. (ADJUSTMENT 

→ GAIN CON-

TROL 

→ WHITE BALANCE → MODE SELECT →

OSD Menu disappears)

The OSD Menu automatically disappears
approximately 30 seconds after the last
command.

MANUAL: Individual menu options are manually

adjusted.

AUTO:

Every menu option is automatically
adjusted.

Press the   button to select [AUTO].

To choose a menu option: SELECT button

To go to the next menu: MENU button

CLOCK
The figures below demonstrate how to adjust so that
vertical stripes disappear.(    buttons)

PHASE
The figures below demonstrate how to adjust so that
horizontal stripes like moire disappears or are at
minimum.(    buttons)

Adjustments to PHASE should be made only
after CLOCK has been properly adjusted.

H-POS (Horizontal Positon), V-POS (Vertical
Position)
To align the entire screen to the screen reference
frame, adjust it in left-right (H-POS) and in up-down
(V-POS).
(    buttons)

Vertical stripes

Horizontal stripes

Screen refer-
ence frame

Adjustment Pattern

MANUAL: Individual menu options are manually

adjusted.

AUTO:

Auto Gain Control* capable of adjusting
[BLACK LEVEL], [CONTRAST]
automatically. Adjust manually as the
needs arise after Automatic adjustment.

Press the   button to select [AUTO].

To choose a menu option: SELECT button

To go to the next menu: MENU button

The Auto Gain Control adjusts contrast and black
level based on the brightest color of the image
displayed and the darkest color. If you are not
using the Adjustment Pattern it is necessary to
display an image in which at least black and
white of 5 mm x 5 mm are contained, and if not
adjustments may not be possible.

If the signal coming from the computer is
composite sync or sync on green, automatic
adjustment cannot be performed. Please perform
manual adjustment instead.

Total screen brightness can be adjusted while
watching the color pattern. (    buttons)

While watching the color pattern, adjustments
can be made so that all graduations appear.
 (    buttons)

On settings other than [STD] not all graduations
can be displayed. To display all graduations, set
to [STD].

Use the     buttons to select [COOL], [·], [STD],
[·], [WARM] or [USER].

Selecting USER will display the setting values for
[R-CONTRAST], [G-CONTRAST] and
[B-CONTRAST], in order to make fine
adjustments.

Use the SELECT button to select
[R-CONTRAST], [G-CONTRAST] and
[B-CONTRAST].

To go to the next menu:

MENU button

COOL . . .  Color tone bluer than STD
   • . . . . . .  Color tone slightly bluer than STD
STD . . . . .  Color tone standard setting
   • . . . . . .  Color tone slightly reddish than STD
WARM . . .  Color tone reddish than STD

USER
R-CONTRAST . . .    button for blue-green

  button for red

G-CONTRAST . .    button for purple

  button for green

B-CONTRAST . . .    button for yellow

  button for blue

Color pattern

Depending on the resolution of the input signal,
even if menu options can be selected, the display
may not change.

To choose a menu option: SELECT button

When adjustment complete: MENU button

The position of the OSD display can be moved to
the left and right. (    buttons)

The position of the OSD display can be moved
up and down. (    buttons)

You can apply the horizontal resolution at 400
line for US TEXT, etc.(    buttons)
640: 640 x 400 dot mode
720: 720 x 400 dot mode (US TEXT etc.)

Every input except 400 line is detected
automatically, therefore no setting is required.

For display modes of less than 1024 X 768
pixels, the display can be expanded if desired.
(    buttons)
ON1: enlarges tha screen without changing the

aspect ratio.

ON2: enlarges the screen to the full display area.

If a resolution of 1024 X 768 pixels cannot be
achieved even after expansion is attempted, the
screen’s perimeter will display black. (This is not
a malfunction.)

Adjusts the image to optimum sharpness when
Screen expansion is taken.(    buttons)

LANGUAGE
You can chose the language used in OSD Menu.
1. Press the   button.

Language Selection Menu (LANGUAGE) will
appear.

2. Chose the desired language by SELECT button.
3. Press MENU button or  the   button, and

Language Selection Menu will disappear.